SUYIJIA 6V 12AH

Contents

User Manual: SUYIJIA 6V 12000mAh LiFePO4 Battery

Model: 6V 12AH | Brand: SUYIJIA

1. Introduction

This manual provides essential information for the safe and efficient use of your SUYIJIA 6V 12000mAh LiFePO4 Battery. Please read these instructions carefully before installation and operation to ensure optimal performance and longevity of the battery.

This LiFePO4 battery features a built-in Battery Management System (BMS) for protection against overcharge, over-discharge, over-current, and short circuits, offering a cycle life of over 2000 cycles. It is suitable for various applications including PDAs, power tools, RVs, emergency lights, lanterns, and kids' ride-on cars.

2. Safety Information

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

  • **Disposal:** For disposal, please check your local authority's website for more information and dispose of the lithium-ion battery safely in accordance with the applicable legal requirements.
  • **Short Circuit Prevention:** When charging, the battery must not be near flammable, explosive, or corrosive items. No debris should be placed within 15 meters of the battery.
  • **Overloading:** Do not charge multiple batteries simultaneously to prevent circuit overloading and wire heating.
  • **Disassembly:** Never disassemble the battery yourself, as this may cause danger.
  • **Polarity:** Ensure correct polarity when connecting the battery. Incorrect polarity can damage the device.
  • **Temperature:** Avoid long-term use in high or low temperature conditions. Ensure adequate ventilation during use.

3. Specifications

Feature Specification
Battery Type LiFePO4 (Lithium Iron Phosphate)
Model Number 6V 12AH (26650-6V-12000MAH)
Nominal Capacity 12000mAh (12Ah)
Rated Voltage 6V
Charging Voltage 8.4V
Discharge Cut-off Voltage 5V
Max Continuous Discharge Current 10A
Max Continuous Charging Current 5A
Dimensions (L x W x H) 100mm x 47mm x 70mm
Weight ~250g
Cycle Life >2000 cycles
Connection Others (compatible with XH, PH, JST SM joints)
Certification CE
High-concerned chemical None

Image showing battery specifications: LiFePO4 type, 6V voltage, 12Ah capacity, ~250g weight, 2000+ life cycles. Figure 3.1: Key Battery Specifications

Image showing the dimensions of the battery: 100mm length, 47mm width, 70mm height. Figure 3.2: Battery Dimensions

Diagram showing internal structure with F2 terminal for excellent vibration durability and ABS case for waterproof, corrosion resistance, Class A battery cell, large capacity, and safety. Figure 3.3: Internal Features and Casing

4. Package Contents

The standard package includes the following items:

  • 1x SUYIJIA 6V 12000mAh LiFePO4 Battery
  • Connection wires (red and black)
  • Battery charger

Image showing the battery, connection wires, and charger included in the packing list. Figure 4.1: Package Contents

5. Installation and Setup

  1. **Battery Installation:** Insert the battery into the battery box of the device correctly, ensuring the polarity is correctly aligned.
  2. **Wiring:** The positive (red wire) and negative (black wire) poles of lithium batteries are for charging and discharging and must not be short-circuited.
  3. **Checking and Adjusting Polarity for XH, PH, JST SM, and other joints (if necessary):**

    After receiving the battery, it is crucial to carefully check the voltage of your primary device's battery and the direction of its positive and negative plug lines. If the polarity of the newly purchased battery's lines is opposite to your device, the device will be damaged.

    To adjust the plug cables if the positive and negative sequences are different, follow these steps:

    1. **Identify:** Observe the current wiring of the plug.
    2. **Release:** Use a sharp object (like a small screwdriver or pin) to press the metal barb inside the plug connector.
    3. **Extract:** Gently pull the corresponding wire (red or black) to release it from the connector. Ensure positive and negative lines do not touch each other during this process.
    4. **Reverse:** Insert the red and black lines into the connector in the reverse order to match the required polarity of your device.
    5. **Verify:** Double-check that the exchange is completed and polarity is correct before connecting the battery to your device.

    Diagram illustrating the process of reversing plug cable polarity for XH, PH, JST SM, and other joints. Shows steps: 1. Initial state, 2. Pressing metal barb, 3. Pulling thread, 4. Close-up of barb, 5. Inserting in reverse, 6. Exchange completed. Figure 5.1: Adjusting Plug Cable Polarity (Refer to the diagram for visual guidance)

6. Operating Instructions

Charging Steps:

  1. Connect the original charger to the charging port of the battery.
  2. The indicator light on the charger will illuminate when charging begins.
  3. To extend battery life and improve efficiency, it is recommended to charge the lithium battery as it is used, rather than waiting for it to be completely discharged before recharging.

The battery pack protection system includes overcharge and over-discharge functions. When fully charged, the protection system will automatically cut off power. The charger also has an overcharge protection function, stopping charging once a certain voltage is reached.

7. Maintenance and Storage

  • **Correct Storage:** When not in use for a long time, store the battery in a dry, cool place to avoid moisture.
  • **Capacity Reduction:** It is normal for the battery capacity to gradually decrease over time during normal use.

8. Troubleshooting

Problem: The battery is not charging.
**Solution:** Check whether the charger is functioning properly and confirm the connection interface is secure.
Problem: Battery is hot.
**Solution:** Stop using it immediately and check for overload or short circuit. Refer to safety information regarding short circuit prevention.
Problem: Device not powering on after battery installation.
**Solution:** Re-check battery installation for correct polarity. If using XH, PH, JST SM, or similar joints, verify the positive and negative wire sequences as described in Section 5.3.

9. User Tips

  • **Verify Charger Type:** Ensure you are using a charger compatible with LiFePO4 batteries and the specified charging voltage (8.4V).
  • **Check Polarity Carefully:** As noted in the instructions, incorrect polarity can damage your device. Always double-check before connecting.
  • **Timely Charging:** Charging the battery before it's fully depleted can help extend its overall lifespan.
  • **Confirm Dimensions:** The battery size is 100mm x 47mm x 70mm. Verify this fits your application before installation.

10. Warranty and Support

For warranty information or technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download: SUYIJIA 6V 12000mAh LiFePO4 Battery User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.