Yeelight Mars C300

Contents

Yeelight RGB Smart Ceiling Light Mars C300 User Manual

Model: YLXDD-0266

Yeelight RGB Smart Ceiling Light Mars C300

Your guide to setting up and using your Yeelight Smart Ceiling Light.

1. Introduction

Thank you for choosing the Yeelight RGB Smart Ceiling Light Mars C300. This smart ceiling light offers versatile lighting options with its independent RGB side light, stepless dimming, and adjustable color temperature from warm to cool. It integrates seamlessly with various smart home platforms, providing convenient control through voice commands or the Mi Home app. This manual will guide you through the installation, operation, and maintenance of your new smart light.

2. Product Description and Components

2.1. Package Contents

  • Lamp body (x1)
  • Self-tapping screw (x3)
  • Expansion tube (x3)
  • Remote control (x1)
  • User manual (x1)

2.2. Product Components

Diagram of Yeelight Smart Ceiling Light components

Description of Components:

  • Mounting Plate: The base that attaches to the ceiling.
  • Steel Wire: Safety wire to secure the light body during installation.
  • Junction Box: Encloses the electrical connections.
  • Light Body: The main unit of the ceiling light.
  • Self-tapping screw: Used for securing the mounting plate.
  • Expansion tube: Used with screws for secure mounting in various ceiling materials.
  • Remote control: For wireless control of light functions.

3. Safety Precautions

  • WARNING: Please put it down carefully and gently. Keep away from sources of ignition.
  • The light installation requires a qualified electrician, and the wiring must comply with IEEE electrical standards or national standards.
  • The ceiling light should be installed in a stable location to prevent it from dropping down or falling off.
  • Under normal use conditions, this equipment should be kept a separation distance of at least 20cm between the antenna and the body of the user.
  • For indoor use only.
  • The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
  • Make sure the voltage is consistent with the ceiling light's operating voltage before use. Using mismatched voltage may damage the ceiling light and cause safety hazards.
  • Do not replace the light source of the ceiling light by yourself. The light source should only be replaced by the manufacturer, after-sales service, or a qualified electrician.
  • The ceiling light generates heat during working. Please keep it well ventilated for heat dissipation.
  • This ceiling light can be controlled by an app or remote control. Turning off the ceiling light by remote control or app does not cut it off from the electricity; hence, do not touch, replace, or disassemble this ceiling light. Otherwise, it may cause an electric shock, injury, or even death.

4. Installation Steps

Before installation, please ensure the power is turned off to prevent the risk of electric shock.

  1. Detach Mounting Plate: Take the expansion screws from the accessory pack, and detach the mounting plate from the light body.
    Step 1: Detach mounting plate
  2. Secure Mounting Plate: Determine the installation position, drill holes based on the mounting plate holes, and use expansion screws to secure the mounting plate.
    Step 2: Secure mounting plate
  3. Hang Safety Rope: After confirming the mounting plate is secure, hang the safety rope of the light body on the mounting plate hook.
    Step 3: Hang safety rope
  4. Connect Wiring: Remove the cap and connect the wiring; cover the cap after wiring. Ensure power is off prior to wiring to avoid electric shock. Wiring length should be 6-8mm, and the wire should be inserted 10mm into the terminal, with a maximum wire diameter of 30mm.
    Step 4: Connect wiring
  5. Attach Light Body: Align the unlock arrow on the light body with the positioning arrow on the mounting plate, rotate until the lock arrow on the light body aligns with the positioning slot on the mounting plate. A click sound indicates proper installation. Turn on the power.
    Step 5: Attach light body

After installation, please ensure the mounting is secure to prevent the risk of falling.

5. Operating Instructions

5.1. Remote Control Usage

Diagram of remote control buttons

Button Functions:

  • ON button: Short press to turn on; long press to activate ambient light.
  • OFF button: Short press to turn off; long press to deactivate ambient light.
  • Color Temperature / Color Button (☆): Short press operates main light; long press operates ambient light.
  • M Button: Short press switches main light modes (Daylight/Moonlight/Color/Flow); long press switches ambient light modes (Static Color and Color Flow effects).
  • Brightness + (+): Short press increases main light brightness (daylight mode); long press increases ambient light brightness.
  • Brightness - (-): Short press decreases main light brightness (daylight/moonlight mode); long press decreases ambient light brightness.

Pairing Remote Control: Within 1 minute of powering on the light, press the remote controller's OFF and M keys simultaneously. The remote indicator will blink, signifying pairing mode. The controlled device light will blink to indicate successful pairing.

5.2. Smart Home Integration

The Yeelight Mars C300 seamlessly integrates with popular smart home platforms, allowing for convenient control.

  • Voice Control: Compatible with Google Home, Amazon Alexa, and Mi Home. Simply use voice commands like

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.