1. Safety Instructions
To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring instructions may cause harm or damage.
WARNINGS
This symbol indicates the possibility of death or serious injury.
- Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
- The appliance shall be stored in a room without continuously operating ignition sources, for example open flames, an operating gas appliance or an operating electric heater.
- Do not pierce or burn.
- Be aware that refrigerants may not contain an odour.
- Appliance shall be installed, operated and stored in a room with a floor area larger than 4 m².
- The installation space of refrigerant pipeline should comply with national gas regulations.
- Keep ventilation openings clear of obstruction.
- The appliance shall be stored to prevent mechanical damage from occurring.
- Any person who is involved with working on or repairing refrigerating circuits should possess a valid certificate issued by industry-recognized assessment organizations certifying that they have the necessary qualifications required for handling refrigerants safely.
- Only maintain and repair the dehumidifier following the methods recommended by the manufacturer. If other technicians are required for assistance, the maintenance or repair should be supervised by persons qualified for handling R290 refrigerants.
- The appliance shall be stored in a well-ventilated area where the room size corresponds to the room area as specified for operation.
- All working procedures that affect safety means shall only be carried by competent persons.
- Do not use the dehumidifier where there may be flammable or corrosive gases nearby.
- Do not place the dehumidifier near a heat source to avoid deformation or fire.
- Do not repair, disassemble, modify or clean internal components yourself. Contact after-sales service for repairs.
- Do not poke fingers, sticks, or any other object into the air inlet or outlet.
- Do not operate or plug/unplug with wet hands.
- Do not clean directly with water or use in places where it may contact water.
- Do not place water containers on top of the dehumidifier.
- Unplug the dehumidifier before care and maintenance.
- Do not exceed the electrical outlet or connection device rating.
- Do not modify power cord length or share the electrical outlet with other appliances.
- Do not drink or use the water drained from the dehumidifier.
- Do not take the water tank out during operation as the contact switch will not disconnect power.
- If you notice anything unusual (e.g., smell of burning), immediately unplug and contact after-sales service.
- Do not use the dehumidifier in a laundry room.
- If the temperature around the hose falls below zero, do not use the continuous drainage function.
- Do not drag the dehumidifier across a carpet.
- Do not place the dehumidifier against objects or walls. Maintain at least 20 cm clearance around and 50 cm above the air outlet.
- For optimal performance, operate in enclosed spaces with doors and windows closed and other ventilating devices off.
- If water enters the dehumidifier, turn it off, disconnect from power, and contact a qualified service technician.
- The dehumidifier shall be installed in accordance with national wiring regulations.
- Appliances with electric heaters shall have at least 1 meter space to combustible materials.
- Do not use the electrical outlet if it is loose or damaged.
- Do not use this dehumidifier for functions other than those described in this user manual.
- Contact the authorized installer for installation.
- In a thunderstorm, disconnect power to avoid damage.
- Do not run the power cord under carpeting or cover it with rugs. Arrange the cord away from traffic areas.
- Do not open the dehumidifier during operation.
- When removing the filter, do not touch metal parts inside.
- Hold the power plug when unplugging the power cord.
CAUTIONS
This symbol indicates the possibility of injury or damage to property.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Failure to strictly follow the precautions may cause serious accidents such as personal injury or death.
- Under normal use of condition, this equipment should be kept a separation distance of at least 20 cm between the antenna and the body of the user.
- Children should be supervised to ensure that they do not play with the appliance.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Before cleaning the dehumidifier, stop it from running and turn it off.
- Do not climb or sit on the dehumidifier.
- Do not allow the dehumidifier to blow directly onto plants or animals.
- Do not place objects with open flames by the outlet.
- Do not block the air inlet or outlet.
- When not used for a long time, disconnect from electrical outlet, empty and dry water tank, then store upright.
- Keep the compressor upright. If tipped, stand upright for at least 4 hours before turning on.
- Do not use in small spaces; lack of ventilation can cause overheating and fire.
- Do not use in areas where chemicals are handled.
- Do not place heavy objects on the power cord.
2. Product Overview
The Xiaomi Smart Dehumidifier 13L is designed to efficiently remove moisture from your home, offering multiple operating modes and smart control features.
Key features of the dehumidifier, including its 13L/day capacity, 3L water tank, and various modes.
Illustration of the dehumidifier's display and control buttons.
Components and Indicators:
- Display Buttons: For interaction and settings.
- Air Outlet Grille: Where dehumidified air exits.
- Wi-Fi Indicator: Shows Wi-Fi connection status.
- Water Full Indicator: Lights up when the water tank is full.
- Air Inlet Grille: Where air enters for dehumidification.
- Baffle Board: Part of the water tank assembly.
- On/Standby Button: Powers the unit on or off, or puts it in standby.
- Timer Button: For setting scheduled operations.
- Mode Button: Cycles through operating modes.
- Humidity Setting Button: Adjusts desired humidity level.
- Humidity/Standby Time Display: Shows current humidity or set standby time.
- Water Tank: Collects condensed water.
- Drainage Hose: For continuous drainage option.
- Wheel: For easy movement of the unit.
Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements.
3. Initial Setup
Important: After moving or unpacking the dehumidifier, leave it in its final location for at least 4 hours before you can plug it into a power outlet and start using it. This allows the refrigerant to settle.
Electrical Information:
- The manufacturer's nameplate on the rear panel contains electrical and technical data.
- Ensure the dehumidifier is properly grounded to minimize electric shock and fire hazards. The power cord has a three-pronged grounding plug.
- Use a properly grounded wall socket. If the socket is not adequately grounded or protected by a time-delay fuse or circuit breaker, have a qualified electrician install the proper socket.
- Ensure the electrical outlet is accessible after installation.
- Do not use extension cords or power adapters unless they are approved for dehumidifiers.
- Always disconnect the dehumidifier from power before installing or servicing.
- All wiring must be performed strictly in accordance with the wiring diagram located on the electrical box.
4. Operating Instructions
Turning On/Off
- Turning On: Plug in the dehumidifier and press the On/Standby button to turn it on.
- Standby Mode: When the dehumidifier is on, press the On/Standby button to enter standby mode. The dehumidifier will dry for 40 minutes before entering standby to reduce internal moisture. This function can be disabled in the app.
- Turning Off: Unplug the dehumidifier to turn it off.
Switching Modes
When the dehumidifier is on, press the Mode button to cycle through the following modes:
- Smart Mode: Automatically adjusts settings and fan speed based on room humidity and your set target humidity.
- Sleep Mode: Starts and stops automatically at a low speed based on room humidity and your set target humidity.
- Clothes Drying Mode: Runs at high speed for powerful dehumidification. Humidity cannot be set manually. If it runs for 8 hours, the target humidity will change to 50%. For best results, spin-dry clothes first and then dry them in an enclosed room.
Note: The dehumidifier makes low noise during operation, so there is no significant difference in noise levels between different modes, which is normal.
Setting Expected Humidity
When the dehumidifier is on, press the Humidity Setting button to cycle through expected humidity levels: 40%, 45%, 50%, 55%, 60%, 65%, and 70%. The setting takes effect automatically after 5 seconds of no operation.
Scheduling Standby Time
When the dehumidifier is on, press the Timer button to schedule standby time from 1 to 12 hours. The setting takes effect automatically after 5 seconds of no operation.
Enabling/Disabling Child Lock
Press and hold the Mode button and Humidity Setting button simultaneously for 3 seconds to enable or disable the child lock function. When enabled, the display shows the child lock icon, and the dehumidifier will not respond to button operations.
Water Full Alert
If the water tank is full or improperly installed, the dehumidifier will beep 3 times, and the water full indicator will blink. All buttons except On/Standby will be disabled. Once the water level returns to normal and the tank is secured, the indicator will turn off, and normal operation resumes. Pour out some water and reinstall the tank properly.
Defrosting
The dehumidifier automatically defrosts if frost covers its evaporator and condenser at indoor temperatures below 15°C. The compressor stops, and the fan runs until defrosting is complete. During defrosting, the defrost icon blinks slowly. After defrosting, the mode icon lights up, and operation resumes.
Resetting Wi-Fi
Press and hold the Mode button and Timer button simultaneously for 7 seconds to reset the Wi-Fi connection.
Wi-Fi Status Description
| Wi-Fi Indicator | Description |
|---|---|
| Blinks slowly | Awaiting connection |
| Blinks quickly | Connecting |
| Remains on | Connected |
Connecting with the Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app. Use the Mi Home/Xiaomi Home app to control your device and interact with other smart home devices.
Scan the QR code to download and install the app. You will be directed to the connection setup page if the app is installed already. Or search for "Mi Home/Xiaomi Home" in the app store to download and install it. Open the Mi Home/Xiaomi Home app, tap "+" on the upper right, and then follow the instructions to add your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name of the app displayed on your device should be taken as the default.
Scan to download Mi Home app.
Note: The version of the app might have been updated, please follow the instructions based on the current app version.
5. Care & Maintenance
Maintenance Precautions
- Before cleaning, disconnect the dehumidifier from power.
- Do not rinse or submerge the dehumidifier in liquid. Do not drip water into it.
- Do not use volatile liquids (e.g., thinner and gasoline) to wipe the dehumidifier. Use a wet cloth with neutral detergent, then a soft dry cloth.
- Clean the filter regularly to avoid performance reduction due to dust buildup. After removing the filter, do not touch the finned parts inside.
Cleaning the Dehumidifier Body
Soak a cloth in water below 45°C, wring it out, and gently wipe the dirty area.
Cleaning the Filter
- Remove the air inlet grille by pulling it out from the bottom, then take out the filter inside the grille.
- Rinse the filter and the air inlet grille with water or use a vacuum cleaner. If particularly dirty (e.g., with oil stains), use warm water (below 45°C) with neutral detergent, then dry it in a cool place.
- Reinstall the filter and the air inlet grille in order. Ensure the air inlet grille is installed in the direction as illustrated (triangle icon up).
Steps for removing and cleaning the air filter.
Cleaning the Water Tank
Remove the water tank, clean it thoroughly, then put it back after fully drying it.
The 3L water tank and option for continuous drainage.
Continuous Drainage Setup
- Pull out the water tank horizontally.
- Remove the baffle board from the water tank and keep it properly to avoid loss.
- Connect the drainage hose to the water outlet.
- Reinstall the water tank and connect the other end of the drainage hose to the drainage. The dehumidifier can then drain water automatically.
Diagram illustrating the steps for setting up continuous drainage.
Note: When draining off water, make sure the end of the drainage hose is lower than the dehumidifier's water outlet, and the hose hangs down smoothly without being wavy or overly bent.
Long-term Storage
- Let the dehumidifier sit for two days after making it enter standby mode and unplugging it.
- Clean the dehumidifier, the water tank, and the filter.
- Coil up the power cord and secure it with a cable tie.
- It is recommended to store the dehumidifier in its original packaging.
- Store the dehumidifier upright in a dry and well-ventilated place.
6. Troubleshooting
| Issue | Cause and Solution |
|---|---|
| The dehumidifier suddenly shakes when it turns on, enters standby mode, or operates. | This is caused by the start or stop of the compressor, which is normal. |
| The dehumidifier does not work well. |
|
| The dehumidifier cannot work. |
|
| The dehumidifier leaks water. |
|
| The dehumidifier makes unusual sounds when running. |
|
| Black stains appear in the water tank. |
|
Common Error Codes
| Code | Description | Solution |
|---|---|---|
| C2 | Fan error | Turn off for 5 minutes, then turn on. If persistent, contact after-sales service. |
| C3 | Communication error between display and motherboard | Disconnect from electrical outlet, then reconnect. If persistent, contact after-sales service. |
| E1 | Pipe temperature sensor error | Turn off for 5 minutes, then turn on. If persistent, contact after-sales service. |
| E9 | Humidity sensor error | Turn off for 5 minutes, then turn on. If persistent, contact after-sales service. |
| H2 | Overload protection | Check if air inlet/outlet is blocked. Turn on again. If persistent, contact after-sales service. |
| H6 | Fluoride deficiency protection | Turn off for 5 minutes, then turn on. If persistent, contact after-sales service. |
| H8 | Overheating protection | Ensure operation between 5°C and 35°C. If persistent, contact after-sales service. |
Note: The error code will appear on the dehumidifier's display.
7. Specifications
- Dehumidifier capacity is measured at calibrated ambient temperature and humidity; results may vary.
- Operating temperature range: 5°C to 35°C. Outside this range, the dehumidifier may not work.
- Specifications are subject to change; details on the nameplate prevail.
| Feature | Detail |
|---|---|
| Name | Xiaomi Smart Dehumidifier 13L |
| Model | DM-CS13BFA5A |
| Rated Voltage | 220 V~ |
| Rated Frequency | 50 Hz |
| Refrigerant | R290/0.038 kg |
| Rated Power Input | 250 W |
| Maximum Input Current | 1.52 A |
| Dehumidification Capacity | 0.29 kg/h (27°C/60% RH), 13 L/D (30°C/80% RH) |
| Noise | ≤38 dB(A) |
| Net Weight | 11.1 kg |
| Air Flow Rate | 140 m³/h |
| Water Tank Capacity | 3.0 L |
| Item Dimensions | Φ290 × 520 mm |
| Operating Temperature | 5°C to 35°C |
| Fuse | 3.15 A/250 V |
| Power Cord | 3 × 0.75 mm² |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz |
Warning: Install, operate, and store the dehumidifier in a room larger than 4 m².
Fuse Specifications
The dehumidifier's circuit board (PCB) is designed with a fuse to provide overcurrent protection. The specifications of the fuse are printed on the circuit board, such as: T 3.15 A/250 V (or 350 V), etc.
Note about Fluorinated Gases
- Fluorinated greenhouse gases are contained in hermetically sealed equipment. Refer to the relevant label on the dehumidifier for specific information on the type, amount, and CO₂ equivalent in tonnes of the fluorinated greenhouse gas used.
- Installation, service, maintenance, and repair must be performed by a certified technician.
- Disassembling and recycling must be performed by a certified technician.
8. User Tips
No specific user tips were available from reviews or Q&A for this product.
9. Warranty & Support
Limited Product Warranty
XIAOMI warrants that the Products are free from defects in materials and workmanship under normal use and use in accordance with the respective Product user manual, during the Warranty Period.
The duration and conditions related to the legal warranties are provided by respective local laws. For more information about the consumer warranty benefits, please refer to Xiaomi's official website https://www.mi.com/global/support/warranty.
Xiaomi warrants to the original purchaser that its Xiaomi Product will be free from defects in materials and workmanship under normal use in the period mentioned above.
Xiaomi does not guarantee that the operation of the Product will be uninterrupted or error free.
Xiaomi is not liable for damages arising from non-compliance with the instructions related to the use of the Product.
Remedies
If a hardware defect is found and a valid claim is received by Xiaomi within the Warranty Period, Xiaomi will either (1) repair the product at no charge, (2) replace the product, or (3) refund the Product, excluding potential shipping costs.
How to Obtain Warranty Service
To obtain warranty service, you must deliver the Product, in its original packaging or similar packaging providing an equal degree of Product protection, to the address specified by Xiaomi. Except to the extent prohibited by applicable law, Xiaomi may require you to present proofs or proof of purchase and / or comply with registration requirements before receiving warranty service.
Exclusions and Limitations
Unless otherwise stipulated by Xiaomi, this Limited Warranty applies only to the Product manufactured by or for Xiaomi and identifiable by the trademarks, trade name or "Xiaomi" or "Mi" logo.
The Limited Warranty does not apply to any (a) Damage due to acts of nature or God, for example, lightning strikes, tornadoes, flood, fire, earthquake or other external causes; (b) Negligence; (c) Commercial use; (d) Alterations or modifications to any part of the Product; (e) Damage caused by use with non-Xiaomi products; (f) Damage caused by accident, abuse or misuse: (g) Damage caused by operating the Product outside the permitted or intended uses described by Xiaomi or with improper voltage or power supply; or (h) Damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Xiaomi.
It is your responsibility to backup any data, software, or other materials you may have stored or preserved on the product. It is likely that the data, software or other materials in the equipment will be lost or reformatted during the service process, Xiaomi is not responsible for such damage or loss.
No Xiaomi reseller, agent, or employee is authorized to make any modification, extension, or addition to this Limited Warranty. If any term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall not be affected or impaired.
Except as prohibited by laws or otherwise promised by Xiaomi, the after-sales services shall be limited to the country or region of the original purchase.
Products which were not duly imported and/or were not duly manufactured by Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi's official seller are not covered by the present warranties. As per applicable law you may benefit from warranties from the non-official retailer who sold the product. Therefore, Xiaomi invites you to contact the retailer from whom you purchased the product.
The present warranties do not apply in Hong Kong and Taiwan.
Xiaomi Contacts
For customers, please visit the website: https://www.mi.com/global/support/warranty
The contact person for the after-sale service may be any person in Xiaomi's authorized service network, Xiaomi's authorized distributors or the final vendor who sold the products to you. If in doubt please contact the relevant person as Xiaomi may identify.
Importer: Beryko s.r.o., Pod Vinicemi 931/2, 301 00 Plzeň, www.beryko.CZ
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Zhuhai Samyou Environmental Technology Co., Ltd.
Address: Unit 3-B-2, Building 4, Zhongdian high tech industrial park, 7 th technology road, Tangjiawan town, Xiangzhou, Zhuhai, Guangdong, China
For further information, please go to www.mi.com
User Manual Version: V1.0
10. Regulatory Compliance Information
Europe - EU Declaration of Conformity
Hereby, Zhuhai Samyou Environmental Technology Co., Ltd. declares that the radio equipment type DM-CS13BFA5B is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html
The product is in compliance with UK PSTI regulations, the full text of declaration of conformity is available at the following internet address: https://www.mi.com/global/service/support/declaration.html
Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.