Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight RGB Smart Ceiling Light Mars. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Image: Yeelight RGB Smart Ceiling Light Mars, showing the light fixture and included remote control.
Video: Demonstration of the Yeelight RGB Smart Ceiling Light Mars features, including voice control and color changing.
Package Contents
Ensure all items are present and in good condition:
- Lamp body (x1)
- Self-tapping screw (x3)
- Expansion tube (x3)
- Remote control (x1)
- User manual (x1)
Image: Exploded view of the Yeelight Mars ceiling light, showing the mounting plate, steel wire, junction box, and light body.
Safety Information
WARNING:
- Installation must be performed by a qualified electrician and comply with IEEE electrical standards or national standards.
- The ceiling light should be installed in a stable location to prevent it from falling.
- Maintain a separation distance of at least 20cm between the antenna and the user's body during normal use.
- For indoor use only.
- The light source in this luminaire is not user-replaceable. It must be replaced by the manufacturer, service agent, or a qualified person.
- The ceiling light generates heat during operation; ensure adequate ventilation for heat dissipation.
- Turning off the ceiling light via remote control or app does not disconnect it from the main power. Always turn off the main power before touching, replacing, or disassembling the light to avoid electric shock, injury, or death.
- Handle the product carefully and gently. Keep away from sources of ignition.
Setup and Installation
Before installation, ensure the main power supply is turned OFF to prevent electric shock.
-
Prepare for Installation: Remove the expansion screws from the accessory pack. Detach the mounting plate from the light body.
Image: Step 1 - Detaching the mounting plate from the light body.
-
Secure Mounting Plate: Determine the desired installation position. Drill holes in the ceiling based on the mounting plate holes. Use the provided expansion screws to securely fasten the mounting plate to the ceiling.
Image: Step 2 - Securing the mounting plate to the ceiling using screws and expansion tubes.
-
Attach Safety Rope: Once the mounting plate is secure, hang the safety rope of the light body onto the mounting plate hook. This provides an extra layer of safety during wiring and final attachment.
Image: Step 3 - Attaching the safety rope to the mounting plate hook.
-
Connect Wiring: Remove the cap from the light body. Connect the electrical wiring. After wiring, replace the cap. Ensure the power is OFF before and during this step to prevent electric shock. The wire stripping length should be 6-8mm, and the wire should be inserted 10mm into the terminal block.
Image: Step 4 - Wiring connections, showing wire stripping length and insertion depth.
-
Final Attachment: Align the unlock arrow on the light body with the positioning arrow on the mounting plate. Rotate the light body until the lock arrow on the light body aligns with the positioning slot on the mounting plate. A click sound indicates proper installation. Turn on the power.
Image: Step 5 - Aligning and locking the light body onto the mounting plate.
Operation
Remote Control Usage
Image: Remote control layout with labeled buttons for ON, OFF, Color Temperature/Color, M (Mode), Brightness +/-.
- Pairing: Within 1 minute of powering on the light, press the remote controller's OFF and M keys simultaneously. The remote indicator will blink, and the light will blink to confirm successful pairing.
- ON button: Short press to turn on the light. Long press to activate ambient light.
- OFF button: Short press to turn off the light. Long press to deactivate ambient light.
- Color Temperature / Color Button:
- Short press: Adjusts the main light's color temperature.
- Long press: Adjusts the ambient light's color.
- M Button (Mode):
- Short press: Cycles through main light modes (Daylight, Moonlight, Color, Flow mode).
- Long press: Cycles through ambient light modes (Static Color, Color Flow effects).
- Brightness + Button:
- Short press: Increases main light brightness (Daylight mode).
- Long press: Increases ambient light brightness.
- Brightness - Button:
- Short press: Decreases main light brightness (Daylight, Moonlight modes).
- Long press: Decreases ambient light brightness.
Smart App Control
The Yeelight RGB Smart Ceiling Light Mars can be controlled via the Mi Home App. It also supports integration with other smart home platforms like Google Home, Amazon Alexa, and SmartThings.
- Download App: Search for "Mi Home" in your device's app store or scan the QR code provided in the manual (page 9) to download and install the app.
- Add Device:
- Open the Mi Home App.
- Click the "+" icon in the upper right corner to add a new device.
- Follow the on-screen instructions within the app to configure and connect your ceiling light.
- Once successfully added, your device will appear in the device list.
Note: The app interface and operation procedures may vary due to updates. Always follow the latest instructions provided within the Mi Home App.
Maintenance
- Regularly clean the light fixture with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the light is turned off and cooled down before cleaning.
- Do not immerse the light in water or spray liquids directly onto it.
- The light source is not user-replaceable. If the light source fails, contact qualified personnel for replacement.
Troubleshooting
Restore Factory Settings
If you experience connectivity issues or need to reset the light, follow these steps:
- Turn the ceiling light ON using the wall switch.
- Turn the light OFF for 2 seconds, then ON for 2 seconds. Repeat this sequence five times continuously.
- After the 9th power cycle (turning ON), the light will "breathe" (brighten and dim), indicating a successful reset. The light will then enter network configuration mode.
Note: When moving the ceiling light to a new network environment, you will need to restore factory settings and reconnect to the new network.
Specifications
Image: Detailed specifications for both C300 and C400 models, including product color, CCT, blue light hazard level, lifespan, applicable area, smart home compatibility, rated power, luminous flux, and dimensions.
| Feature | Model C300 (YLXDD-0266) | Model C400 (YLXDD-0267) |
|---|---|---|
| Product Color | White | White |
| CCT (Color Correlated Temperature) | 2700K-6500K | 2700K-6500K |
| Blue Light Hazard Level | RG0 | RG0 |
| Lifespan | Approx. 50000 h | Approx. 50000 h |
| Applicable Area | 10-20m² | 15-25m² |
| Smart Home Compatibility | Alexa, Google Home, Mi Home, Yandex | Alexa, Google Home, Mi Home, Yandex |
| Rated Power | 24W | 30W |
| Luminous Flux | 1800lm | 2600lm |
| Dimensions | Φ300mm*31.5mm | Φ400mm*35mm |
| Voltage/Frequency | 220-240V~, 50/60Hz | 220-240V~, 50/60Hz |
| Waterproof Rating | IP20 | IP20 |
| Protection Class | Class II | Class II |
| CRI (Color Rendering Index) | Ra≥90 | Ra≥90 |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, Bluetooth 4.2 BLE |
| Transmission Power | 20dBm | 20dBm |
| Operating Temperature | -20 to +45°C | -20 to +45°C |
| Operating Humidity | 0%-75%RH | 0%-75%RH |
| Power Factor | >0.6 | >0.6 |
| Certification | CE, RoHS | CE, RoHS |
| Origin | Mainland China | Mainland China |
For more details, refer to the User Manual (PDF).
User Tips
- When setting up, ensure your Wi-Fi network is 2.4 GHz for optimal connectivity with the light.
- If the remote control seems unresponsive, try re-pairing it with the light as described in the "Remote Control Usage" section.
- For the best smart home experience, ensure your Mi Home, Google Home, or Alexa app is updated to the latest version.
- Experiment with the 16 preset RGB light effects to find the perfect ambiance for different activities or moods.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the official Yeelight support channels. Keep your purchase receipt as proof of purchase.
This product complies with CE and RoHS certification standards.
WEEE Disposal and Recycling: All products bearing the WEEE symbol indicate that they should not be mixed with unsorted household waste. Proper disposal and recycling help prevent potential negative consequences for the environment and human health. Contact your local authorities for information on collection points and recycling terms.