1. Introduction
The Jumunion MiTag Go is a smart tracking device designed to help you locate your personal belongings using the Google Find My network on your Android device. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your MiTag Go.
Main Features:
- Google Certified Product
- Integrates seamlessly with Google Find My network
- Global positioning range
- Enhanced privacy protection
- IP65 Waterproof Rating
- Long-lasting replaceable battery
2. Safety Warnings and Precautions
⚠ Warning:
- Keep out of reach of children.
- In case of ingestion, seek medical attention immediately.
- Keep away from ignition sources.
- Ensure adequate ventilation when storing or using the device.
3. Package Contents
Please check the package to ensure all items are present:
- Jumunion MiTag Go Smart Tracking Device
- User Manual (this document)
- (Optional: Protective case, depending on purchased variant)
4. Setup Guide
4.1 Initial Pairing (Automatic Connection)
- Power on the product: Ensure your MiTag Go is powered on.
- Enable Bluetooth and Wi-Fi: On your Android phone, turn on both Bluetooth and Wi-Fi.
- Automatic Recognition: Bring the MiTag Go close to your Android phone. An automatic popup should appear on your phone for one-touch setup. Follow the on-screen prompts to pair.
4.2 Manual Connection Steps
If the automatic popup doesn't appear, follow these steps to connect manually:
- Open your phone's Settings.
- Navigate to Google.
- Select All services.
- Go to Devices.
- Turn on Scan for nearby devices.
- View Available devices nearby and select your MiTag Go to complete the pairing process.
5. Operation
5.1 Locating Your Items
Once paired, you can use the Google Find My app on your Android device to locate your MiTag Go. The app will display the last known location of your tracker on a map. If the device is nearby, you can trigger a sound from the MiTag Go to help pinpoint its exact location.
5.2 Privacy Protection
Your data is protected by Google's comprehensive privacy features within the Find My network. Location data is encrypted and only accessible to you.
6. Maintenance
6.1 Battery Replacement
The MiTag Go features a replaceable battery for extended use. To replace the battery:
- Gently twist the two halves of the MiTag Go counter-clockwise to open the casing.
- Remove the old battery.
- Insert a new compatible battery (e.g., CR2032 coin cell) with the positive (+) side facing up.
- Align the two halves and twist clockwise to securely close the casing.
6.2 Cleaning and Care
The MiTag Go has an IP65 waterproof rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. While it can withstand splashes, it is not designed for submersion. Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| MiTag Go not pairing | Bluetooth/Wi-Fi off, device out of range, low battery, software glitch. | Ensure Bluetooth and Wi-Fi are on. Bring device closer. Check battery level and replace if necessary. Try manual connection steps (Section 4.2). Restart your phone. |
| Cannot hear sound from MiTag Go | Device too far, battery low, sound setting off. | Move closer to the device. Replace battery. Check sound settings in the Google Find My app. |
| Inaccurate location tracking | Poor network coverage, GPS interference, device indoors. | Move to an area with better network coverage. Ensure location services are enabled on your phone. Note that indoor tracking may be less precise. |
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | GPS Locator (MiTag Go) |
| Brand | Jumunion |
| Compatibility | Android devices with Google Find My |
| Waterproof Rating | IP65 |
| Battery Type | Replaceable (e.g., CR2032 coin cell) |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package Dimensions (approx.) | 20 cm (Length) x 20 cm (Width) x 5 cm (Height) |
| Package Weight (approx.) | 0.04 kg |
9. User Tips
- For best tracking accuracy, ensure your Android device has location services enabled and is connected to the internet.
- Regularly check the battery status in the Google Find My app to avoid unexpected power loss.
- Attach the MiTag Go securely to items you frequently misplace, such as keys, wallets, or bags.
10. Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact Jumunion customer service. Keep your proof of purchase for any warranty claims.
A comprehensive user manual in PDF format may also be available for download from the product page or manufacturer's website.
11. Regulatory Compliance
This device complies with relevant regulatory standards, including:
- FCC (Federal Communications Commission)
- CE (Conformité Européenne)
- RoHS (Restriction of Hazardous Substances)
Disposal: Do not dispose of this product with household waste. Please recycle electronic devices responsibly at designated collection points.