MEUYAG ZJ-027 sound

Contents

Magnetic Induction Speaker Phone Stand

Model: ZJ-027 sound | Brand: MEUYAG

Introduction

Thank you for purchasing the MEUYAG Magnetic Induction Speaker Phone Stand. This device combines a powerful speaker, a versatile phone stand, and a portable charging function, enhanced with RGB lighting. This manual provides essential information for safe and optimal use of your new device.

Video: Product demonstration and features overview.

Package Contents

Please check the box for the following items:

  • 1x Magnetic Induction Speaker Phone Stand (Model ZJ-027 sound)
  • 1x USB Charging Cable (USB 3.0 data cable)

Setup

  1. Unpack: Carefully remove all components from the packaging.
  2. Charge the Speaker: Before first use, fully charge the speaker. Connect the provided USB charging cable to the speaker's Type-C input port and plug the other end into a compatible USB power adapter (not included). The charging duration is approximately 2 hours.
  3. Positioning: Unfold the stand to your desired angle. The phone holder can rotate 360 degrees for optimal viewing.
Speaker with USB-A port and phone charging

Image: Speaker with 5000mAh battery and USB-A port for phone charging. Note: No wireless charging function.

Operating Instructions

Controls

  • Power On/Off: Long press the power button.
  • Switch Modes (Induction/Bluetooth): Double click the power button.
  • Light Switching: Press the light button to cycle through RGB light modes.
  • Previous Track: Short press the 'Previous' button.
  • Decrease Volume: Long press the 'Previous' button.
  • Next Track: Short press the 'Next' button.
  • Increase Volume: Long press the 'Next' button.

Induction Mode (No Bluetooth Required)

This mode uses a built-in sensitive sensor to automatically play music from your phone's speaker.

  1. Ensure your phone's speaker is active and playing audio.
  2. Place your phone on the speaker holder, aligning your phone's speaker with the induction area of the stand.
  3. The speaker will automatically sense and amplify the sound.
Correct and incorrect phone placement for induction mode

Image: Correct placement of phone for Induction Mode. Ensure phone volume is at 50% or higher for best results.

Note: In Induction Mode, the speaker buttons cannot switch songs. Control playback directly from your phone.

Bluetooth Mode

For a stable and high-quality audio connection.

  1. Double click the power button to switch to Bluetooth Mode (if not already in it). The speaker will enter pairing mode.
  2. On your mobile device, enable Bluetooth and search for available devices.
  3. Select

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.