User Manual

1. Product Information

• Product Name: Battery box light string
• Model: DCKDC001
• Batch/Serial Number: 2026/02/03

2. Safety & Warnings

Important Safety Information

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

• WARNING: Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• Do not use this product for purposes other than its intended use.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• Do not expose to water or moisture.
• Handle with care to avoid cuts or injuries.
• Avoid exposing this product to extreme high or low temperatures to prevent affecting its normal use and lifespan.

3. Setup

3.1 Unpacking and Inspection

Before use, carefully inspect the product and all components to ensure there is no damage or looseness.

3.2 Battery Installation

This product requires dry batteries (not included). Open the battery box, insert the required batteries according to the polarity markings, and close the cover securely.

3.3 Placement and Hanging

The string lights feature a hanging hole for easy installation. You can drape them over trees, archways, fences, or place them in planters and along garden paths. The flexible copper wire allows for creative shaping and arrangement.

4. Operating Instructions

4.1 Power On/Off

Use the ON/OFF buttons on the remote control or the battery box to power the lights on or off.

4.2 Lighting Modes

The string lights offer 8 distinct lighting modes, controllable via the remote. Press the 'MODE' button to cycle through them:

1. Combination: All modes cycle automatically.
2. In Waves: Lights fade in and out in a wave-like pattern.
3. Sequential: Lights illuminate in sequence.
4. Slo Glo: Lights slowly glow on and off.
5. Chasing/Flash: Lights chase and flash.
6. Slow Fade: Lights slowly fade in and out.
7. Twinkle/Flash: Lights twinkle and flash.
8. Steady On: Lights remain continuously lit.

4.3 Timer Function

Activate the timer function using the 'TIMER' button on the remote. The lights will stay on for 6 hours and then automatically turn off for 18 hours, repeating the cycle.

4.4 Dimming

Adjust the brightness of the lights using the 'DIM +' and 'DIM -' buttons on the remote control.

4.5 Memory Function

The remote control features a memory function, which means the lights will resume the last selected mode when turned on again.

5. Maintenance and Care

• Clean this product regularly to maintain its condition and avoid contact with chemicals.
• Handle the product with care when storing it to prevent drops or excessive force that could damage internal components.
• When not in use for extended periods, remove batteries to prevent leakage and damage to the battery box.

6. Troubleshooting

• Lights not turning on: Ensure batteries are correctly installed with proper polarity and are not depleted. Check if the ON/OFF switch is in the 'ON' position.
• Remote not working: Ensure the remote has a clear line of sight to the battery box. Check the remote's battery.
• Lights flickering or dim: Replace old batteries with new ones.

7. Specifications

8. User Tips

• For best visual effect, drape the lights creatively to mimic natural cascading vines.
• Utilize the timer function to save battery life and enjoy automated lighting.
• Experiment with different dimming levels to set the perfect ambiance for any occasion.

9. Warranty & Support

Manufacturer Information

• Company Name: Linhai Yichen Lighting Co., Ltd.
• Full Address: Dong Cheng Zhen Xia'an 1-13Hao, Linhai City, Taizhou City, Zhejiang Province
• Email: q4009103@gmail.com

EU Authorized Representative

• AR Company Name: Ubuy SAS
• Full Address: 4 Abel Tissot, 93210 Saint-Denis, France
• Email: Ubuysas@outlook.com

Compliance Information

This product complies with CE and UKCA standards.