LEXXSON RM-BM2905F

Contents

Wireless CarPlay Android Auto Interface User Manual

Model: RM-BM2905F | Brand: LEXXSON

1. Introduction

Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.

2. Safety Precautions

  • Install only by qualified professionals to avoid damaging vehicle electrical systems.
  • Disconnect car battery before installation to prevent short circuits.
  • Ensure all connections are secure and insulated to avoid fire hazards.
  • Do not block airbags, driver visibility, or vehicle controls during installation.
  • Avoid modifying essential vehicle safety systems or wiring.
  • Operate connected devices only when parked; never distract from driving.
  • Regularly check for loose connections or overheating during use.
  • Stop using immediately if unusual smells, sounds, or malfunctions occur.
  • Ensure product usage complies with local traffic laws and regulations.
  • Keep product away from water, extreme temperatures, and direct sunlight when not in use.

3. Function Introduction

The LEXXSON Wireless CarPlay Android Auto Interface integrates seamlessly with your BMW's existing infotainment system, providing enhanced connectivity and smart features.

3.1 Key Features

  • Apple CarPlay: Connect your iPhone to access navigation, music, calls, and messages via your car's screen or voice commands. Supports hands-free operation, syncing contacts and playlists for enhanced driving safety and convenience.
  • Android Auto: Connect your Android phone to bring essential apps safely to your car display. Access navigation, music, calls, and messages via voice or touch, prioritizing driving-focused features for convenience and safety.
  • Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
  • Wireless Connectivity: Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 Technology.
  • Control Integration: Control via steering wheel buttons, iDrive controller, and voice commands ("Hey Siri...").
  • GPS Navigation: Use your favorite navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
  • Audio Quality: Built-in DSP with fully adjustable Audio EQ for optimal sound quality.
  • Camera Inputs: Two RCA inputs allow for adding rear and front PAL, NTSC AHD cameras.
  • Parking Assistance: Supports HD 360 panoramic cameras, dynamic guidance lines, and Parking Distance Control (PDC) in OEM parking style.
  • Plug and Play: Non-destructive installation without cutting wires.
  • Seamless Switching: Easily switch between CarPlay/Android Auto display and the original factory system using existing car controls.
Wireless CarPlay Android Auto Interface with BMW interior
Image: Wireless CarPlay and Android Auto Interface module shown with a BMW interior displaying CarPlay on the screen.
Wireless CarPlay Smart Module for BMW NBT features
Image: Diagram highlighting key features of the Wireless CarPlay Smart Module for BMW NBT, including Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, and Online Entertainment.

4. Compatible Systems and Car Models

This interface is compatible with specific BMW NBT and CIC systems. Please verify your car's system and screen size before installation.

4.1 NBT System Compatibility

To confirm NBT system compatibility, check your original car radio home screen menu. It should resemble the "Main menu" with options like "Multimedia", "Radio", "Telephone", "Navigation", "Office", "ConnectedDrive", "Vehicle Information", and "Settings". Also, verify the LVDS port on the back of the OEM car screen is a 6-pin connector.

BMW NBT System compatibility check
Image: Visual guide for identifying BMW NBT system compatibility. Step 1 shows correct (green check) and incorrect (red X) home screen menus. Step 2 shows the correct 6-pin LVDS port (green check) and incorrect 4-pin port (red X).
BMW NBT Compatible Models
Car ModelYearScreen Size
1 Series (F20/F21)2013-20156.5/8.8/10.25 inch
2 Series (F22)2013-20156.5/8.8/10.25 inch
3 Series (F30/F31/F34/F80)2012-20156.5/8.8/10.25 inch
4 Series (F32/F33/F36)2013-20156.5/8.8/10.25 inch
5 Series (F07/F10/F11/F18)2012-20156.5/8.8/10.25 inch
6 Series (F06/F12/F13)2013-20166.5/8.8/10.25 inch
7 Series (F01/F02/F03)2012-20146.5/8.8/10.25 inch
X3 (F25)2013-20166.5/8.8/10.25 inch
X4 (F26)2014-20166.5/8.8/10.25 inch
X5 (F15/F85)2014-20166.5/8.8/10.25 inch
X6 (F16/F86)2014-20166.5/8.8/10.25 inch
MINI (F56)2014-20166.5/8.8/10.25 inch

4.2 CIC System Compatibility

To confirm CIC system compatibility, check your original car radio home screen menu. It should resemble the "Main menu" with options like "CD/Multimedia", "Radio", "Telephone", "Navigation", "Contacts", "BMW Assist", "Vehicle Info", and "Settings". Also, verify the LVDS port on the back of the OEM car screen is a 4-pin connector.

BMW CIC System compatibility check
Image: Visual guide for identifying BMW CIC system compatibility. Step 1 shows correct (green check) and incorrect (red X) home screen menus. Step 2 shows the correct 4-pin LVDS port (green check) and incorrect 6-pin port (red X).
BMW CIC Compatible Models
Car ModelYear
1 Series (E87)2008-2012
3 Series (E90/E91/E92/E93)2009-2012
5 Series (E60/E61)2008-2009
6 Series (F06/F12/F13)2010-2012
7 Series (F01/F02)2011-2012
X1 (E84)2009-2014
X3 (F25)2011-2013
X5 (F70)2009-2013
X6 (E71/E72)2009-2013
Z4 (E89)2009-2013
MINI (R55/R56/R60)2008-2012
Identify iDrive System NBT vs CIC LVDS plug
Image: Guide to identify iDrive System (NBT vs. CIC) by checking the screen's LVDS port. NBT System uses a 6-pin LVDS plug, while CIC System uses a 4-pin LVDS plug. This is especially important for BMW 2012-2014 models.

5. Setup and Installation

Important: Installation should only be performed by qualified professionals to prevent damage to vehicle electrical systems. Disconnect the car battery before installation.

A detailed user manual (PDF) is available for further guidance. View User Manual (PDF)

5.1 Wiring Diagram

Follow the diagram below for connecting the CarPlay & Android Auto interface module to your BMW's existing system. Ensure all connections are secure.

CarPlay Android Auto Interface Wiring Diagram
Image: Wiring diagram showing connections for the CarPlay & Android Auto interface. It illustrates how to connect the ADD LVDS Harnesses, Factory LVDS Harness, AUX OUT, and Factory Power Harness to the original car fiber optic cable and the main unit.

Note on AUX Output: If your car does not have Bluetooth functionality, audio can be output through the vehicle's auxiliary input. Connect the AUX cable to the factory system and the external microphone to the CarPlay Box. Select "AUX" from the factory NBT system's audio output options. If there is any noise, unplug the designated wire.

AUX Sound Output connection diagram
Image: Diagram illustrating the AUX sound output connection. It shows connecting the AUX cable and external microphone to the CarPlay box and selecting "AUX front" from the car's external devices menu.

5.2 DIP Settings

The DIP switches on the module configure it for your specific car model and screen size. Refer to the table below for correct settings. Ensure the dial is set to "ON" for active switches.

BMW NBT DIP Settings
Car ModelYearScreen SizeDIP Setting
6.5 inch2012-20166.5 inch24/134 ON
8.8/10.25 inch2012-20168.8/10.25 inch35/34/124 ON

Note: Since screen configuration cannot be obtained directly from the original system, all DIP options are provided. If unsure, try them one by one. After switching the DIP, be sure to restart the decoder for the changes to take effect.

5.3 External Camera Settings (Optional)

The CarPlay interface supports external camera inputs for enhanced safety features.

5.3.1 Rear View Camera Input

This CarPlay interface supports camera input for clear rearview imagery. Connect the camera as shown in the guide. If the aftermarket camera supports reversing trajectory lines, uncheck the A1 box in the MCU Setup to display them. For the aftermarket radar option, uncheck the A2 box.

Rear View Camera Input Wiring Diagram
Image: Wiring diagram for connecting an optional AHD Rear View Camera to the CarPlay interface. It shows the camera connected to the LVDS IN port and the power/video cables.
MCU Setup for Radar and Trajectory
Image: Screenshot of the MCU Setup menu, showing options for radar and trajectory lines. To enable reversing rear view function, navigate to "Factory mode - Advanced mode", enter password "888888", then in "MCU Setup" uncheck "A0" option. Return to previous level and click "Restart system".

5.3.2 Front Camera Input

If you wish to connect a front camera, please choose the "A3" option in the MCU Setup.

6. Operation

6.1 Wireless Connection (CarPlay / Android Auto)

The system uses wireless CarPlay and Android Auto, supporting audio and video separation. Before using, pair your device via Bluetooth and ensure your vehicle's audio system is set to Bluetooth music mode for optimal connection and audio performance.

Wireless connection process for CarPlay/Android Auto
Image: Screenshots showing the Bluetooth pairing process on an iPhone for wireless CarPlay/Android Auto. It illustrates turning on Bluetooth and Wi-Fi, selecting the device name "CAR Audio_XXXX", and confirming pairing.
  1. Turn on your phone's Bluetooth and Wi-Fi, and keep them on.
  2. Select the Bluetooth Device name (e.g., "CAR Audio_XXXX") from the Smart Box's Bluetooth settings.
  3. Pair your phone. If prompted, confirm the pairing code.
  4. Once paired, follow the on-screen prompts to enable CarPlay or Android Auto.

Audio Source: After connecting, check your iPhone to ensure the sound source is set to the original car radio for audio output.

iPhone Bluetooth settings showing connected device
Image: iPhone Bluetooth settings screen, showing "Anyfar's iPhone" connected and the option to add a new device.
Android Auto connection prompt
Image: Android Auto screen displaying a prompt to connect an Android phone via Bluetooth or USB cable.

6.2 Button Control

The interface retains the use of your original car's steering wheel buttons and iDrive controller for seamless operation.

Steering Wheel Button Functions
ButtonOperationFunction
Call button (phone icon)Short pressAnswer the phone
Volume Up (+)Short pressIncrease the volume
Volume Down (-)Short pressDecrease the volume
BMW Steering Wheel Buttons
Image: Close-up of a BMW steering wheel showing the call, volume, and mode buttons.
iDrive Controller Functions
ButtonOperationFunction
MENU buttonLong pressSwitch between OEM screen and CarPlay/Android Auto interface
Back button (triangle icon)Double ClickSwitch between OEM screen and CarPlay/Android Auto interface
iDrive knobSwipe/ClickControl function volume
BMW iDrive Controller
Image: Close-up of a BMW iDrive controller with MENU, BACK, and OPTION buttons, and the rotary knob.
Switching between OEM and CarPlay systems
Image: Diagram showing how to switch between the factory OEM car system and the CarPlay system by long-pressing the "MENU" button on the car knob.

6.3 Intelligent Voice Control

Utilize intelligent voice control for hands-free operation, enhancing driving safety. Simply say "Hey Siri" for Apple CarPlay or use Google Assistant for Android Auto to play music, make calls, or get directions.

Intelligent Voice Control for CarPlay and Android Auto
Image: Screenshots demonstrating intelligent voice control with "Hey Siri" for Apple CarPlay and Google Assistant for Android Auto, showing commands like "Play Music" and "Call 'David'".

6.4 Online Navigation

Use your preferred navigation app (e.g., Google Maps, Apple Maps) directly on your car's screen to go wherever you want, enjoying the journey with live traffic information.

Online Navigation with CarPlay
Image: Screenshot of a car display showing online navigation via CarPlay, with a map and route displayed.

7. Maintenance

  • Regularly check all connections for looseness or signs of overheating.
  • Keep the product away from water, extreme temperatures, and direct sunlight.
  • Clean the unit with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the unit to prevent overheating.

8. Troubleshooting

8.1 Why does the Box's Bluetooth disconnect?

The wireless CarPlay/Android Auto system works by establishing a Wi-Fi connection for data transmission after Bluetooth pairing. To avoid interference, the Bluetooth connection will intentionally disconnect once the Wi-Fi connection is stable. This is normal operation.

8.2 I cannot connect CarPlay/Android Auto, but Bluetooth is already paired.

Please "forget" the device's Bluetooth connection on your iPhone and reset Wi-Fi settings. On iPhone, go to Settings > General > Transfer or Reset iPhone > Reset > Reset Network Settings. Then attempt to pair again.

8.3 Why is the wireless CarPlay/Android Auto connection not stable?

  1. Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
  2. Switch the Wi-Fi channel within the CarPlay box settings. Go to Factory Mode > Connectivity Settings > Hotspot Band > Select 1, 6, or 11, depending on the current region, to find the most stable channel.

8.4 Flickering or Black/Orange Screen

If you experience flickering or a black/orange screen, ensure all connections, especially LVDS cables, are securely seated. Check the DIP switch settings for your specific car model and screen size, and restart the decoder after any changes. If the issue persists, contact technical support for potential software updates or further diagnostics.

9. Specifications

FeatureValue
Operating Voltage9-16V, 14.4V (rated)
Operating Temperature-30°C ~ +75°C
Power Consumption Current1A (rated), 3A (Max)
Quiescent CurrentLess than 3mA
Charging Current≤2A (If USB charging current >1A, host machine activates circuit protection to limit current to 15A to prevent burning)
Storage Temperature-30°C ~ +85°C
Ambient Humidity≤98% (at 45°C), 65±5% (rated)

9.1 Product Dimensions and Weight

  • Length: 26 cm
  • Width: 19 cm
  • Height: 11 cm
  • Weight: 0.952 kg

10. User Tips

  • System Identification: Before ordering or installing, carefully check your car's iDrive system (NBT or CIC) and the LVDS port type (6-pin for NBT, 4-pin for CIC). This is crucial, especially for BMW 2012-2014 models.
  • DIP Switch Accuracy: Pay close attention to the DIP switch settings for your specific screen size and car model. Incorrect settings can lead to display issues. Always restart the decoder after adjusting DIP switches.
  • Audio Output: If your car lacks Bluetooth, remember to connect the AUX cable and select "AUX" as the audio source in your car's menu for sound output.
  • Wireless Stability: If you experience unstable wireless connection, try changing the Wi-Fi hotspot band in the CarPlay box settings (channels 1, 6, or 11). Ensure the module is not obstructed by metal components.
  • Professional Installation: Due to the complexity of vehicle electrical systems, professional installation is highly recommended to avoid damage and ensure proper functionality.

11. Warranty and Support

This product comes with a 365-day warranty, ensuring quality assurance and authenticity. In case of any issues, please refer to the troubleshooting section or contact our technical support.

  • Quality Assurance: The product undergoes quality inspection.
  • Warranty: 365 Day Warranty.
  • Technical Support: For any technical issues, please contact techsupport@anyfar.com.
Guaranteed Quality and Support
Image: Icons representing product quality assurance, 24-hour shipping, 365-day warranty, 100% authentic product, 1v1 engineer service, and a professional team.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.