DRL Eyebrows for Toyota Tundra Sequoia (2022-2024) - User Manual

1. Important Safety Information

• Do not modify or disassemble the product's circuitry, as this may cause malfunctions or safety hazards.
• Do not use in damp, high temperature, or flammable/explosive environments.
• Do not adjust the lights during driving to avoid distractions.

2. Product Overview

The VGETTING DRL Eyebrows are designed to enhance the visibility and aesthetic appeal of your Toyota Tundra or Sequoia. These lights provide dual functionality as bright white Daytime Running Lights (DRL) and amber yellow Turn Signal Lights.

Key Features:

• Dual Functionality: Provides bright white LED Daytime Running Lights (DRL) and amber yellow LED Turn Signal Lights.
• Enhanced Visibility: Improves vehicle visibility during various conditions like night time, heavy rain, snow, or dense fog.
• Precision Optics: Offers a highly controlled concentration of light for optimal visibility.
• Durable Construction: Made with premium ABS housing and a polycarbonate lens for superior UV protection and high impact resistance.
• Weather Resistant: Designed to withstand rigorous weather conditions with an IP67 waterproof rating.
• Easy Installation: Direct replacement design with standard plug-and-play connections and double-sided adhesive for non-destructive installation.
• Improved Aesthetics: Greatly enhances the styling and appearance of the vehicle.

3. Installation Guide (Setup)

Pre-Installation Check:

1. Ensure all components are present in the package.
2. Test the lights by temporarily connecting them to a 12V power source to confirm functionality before permanent installation.

Surface Preparation:

1. Choose the desired installation location on your vehicle (typically along the hood line above the headlights).
2. Thoroughly clean the installation surface to remove any dust, dirt, oil, or wax. The surface must be completely dry for strong adhesive bonding.

Wiring Connections:

1. Identify the wiring harness from the DRL eyebrows.
2. Connect the wires as follows:
   • Yellow wire: Connect to the positive (+) wire of your vehicle's turn signal light circuit.
   • Black wire: Connect to the negative (-) or ground wire of your vehicle's electrical system.
   • Red wire: Connect to the ACC (Accessory) positive (+) power source, which provides power when the ignition is on.

Image 1: Wiring and Adhesive Installation - This diagram illustrates the wiring connections: Yellow wire to Turn Signal Light (+), Black wire to Negative (-), and Red wire to ACC (+). It also shows the use of double-sided adhesive for mounting.

Mounting the Lights:

1. Carefully peel off the backing from the double-sided adhesive on the back of the DRL eyebrows.
2. Align the DRL eyebrows precisely with the contours of your vehicle.
3. Press firmly along the entire length of the light to ensure secure adhesion.

Wire Management:

1. Carefully route and hide all connecting wires under the vehicle's interior panels, sealing strips, or carpet. This ensures the wiring is not exposed, protected from damage, and does not interfere with driving operations.

Image 2: Product Placement and Surface Preparation - Shows the DRL eyebrows installed on the vehicle's hood line, emphasizing adhesive bonding for a tight fit. It instructs to clean and dry the flat surface before applying the double-sided adhesive.

4. Operation

• Daytime Running Lights (DRL): When the vehicle's ignition is turned on (ACC power is supplied), the DRL eyebrows will illuminate with a bright white light, enhancing your vehicle's visibility during daylight hours.
• Turn Signal Function: When the vehicle's turn signal is activated, the corresponding DRL eyebrow will switch from white to an amber yellow flashing light, indicating your turning intention to other drivers. Once the turn signal is disengaged, the light will revert to the white DRL mode.

Image 3: Lighting Effects - Displays the two primary lighting modes: bright white for Daytime Running Light (DRL) and amber yellow for Turn Signal Light.

5. Maintenance

• Wiring Integrity: Periodically inspect all wiring harnesses to ensure they remain securely fixed and are not loose or damaged.
• Environmental Exposure: Avoid exposing the light strips to extremely high temperatures or excessively humid environments, which can degrade performance and lifespan.
• Troubleshooting Abnormalities: In case of abnormal flashing, flickering, or any unusual odor from the lights, immediately turn off the vehicle's power, disconnect the lights, and inspect for issues.
• Long-Term Storage: If the vehicle is not going to be used for an extended period, it is advisable to turn off the ambient lights to prevent unnecessary power drain.
• Cleaning: Clean the exterior of the lights with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens or housing.

6. Troubleshooting

• Light Does Not Illuminate:
  • Check whether the power connections (Red to ACC, Black to Negative, Yellow to Turn Signal) are secure and correctly wired.
  • Verify that the vehicle's 12V power supply is active.
• Incorrect Color Display (e.g., only white, no yellow turn signal, or vice-versa):
  • Ensure the yellow wire is correctly connected to the turn signal positive.
  • Try restarting the vehicle's electrical system (turn off and on the ignition).
• Overheating:
  • If the unit feels excessively hot to the touch, discontinue use immediately.
  • Allow the unit to cool down completely.
  • Check for any obstructions around the lights that might impede heat dissipation or any wiring issues that could cause excessive current draw.

7. Specifications

Dimensions (Approximate):

• Length: 31 cm (12.20 inches)
• Width (max): 26 cm (10.23 inches)
• Thickness: 2 cm (0.78 inches)

Image 4: Product Dimensions - Provides the approximate measurements of the DRL eyebrow: 31cm (12.20") length, 26cm (10.23") width at the widest point, and 2cm (0.78") thickness.

Image 5: IP67 Waterproof Rating - Highlights the IP67 waterproof rating, indicating the product is protected against dust and temporary immersion in water, ensuring durability and long life.

8. Warranty and Support

For any questions, concerns, or issues regarding the product, please contact the seller's customer service directly. Provide your order details for faster assistance.