Qkens JM300 Pro

Contents

JM300 Pro 4K Wireless HDMI Extender

Model: JM300 Pro | Brand: Qkens

1. Warning & Safety Information

Please read the following safety manual and use steps before using this product:

  • ▲ Do not expose equipment to rain, fire, and liquids.
  • ▲ Don't put anything in the device.
  • ▲ Do not repair the equipment or open the casing without professional help.
  • ▲ Ensure good ventilation openings to avoid overheating damage to the product.
  • ▲ Verify device compatibility before use.
  • ▲ Power off before installation to ensure environment safety.

2. Product Introduction

The Qkens JM300 Pro is a 4K Wireless HDMI Extender Kit designed to transmit HD audio and video signals wirelessly using its built-in transmission protocol. This allows for easy enjoyment of large screens without the constraints of HDMI cables.

Key Features:

  • Wireless Transmission: Transmits HDMI audio/video signals wirelessly, eliminating cable clutter.
  • Extended Range: Up to 200 meters (656 feet) transmission distance in a barrier-free open space (one-to-one mode).
  • High Resolution: Supports Full HD 1080P at 60Hz and 4K at 30Hz wireless transmission.
  • Multi-Device Support: Supports 1 Transmitter (TX) to up to 4 Receivers (RX), allowing up to 8 monitors.
  • Dual Display: Each Receiver (RX) features two HDMI outputs for dual display capabilities.
  • Plug and Play: No drivers, Wi-Fi, or internet connection required for basic operation. Simple pairing for quick setup.
  • Multi-Channel: Supports 9 optional channels, allowing up to 8 sets to be used in the same space without mutual interference.
  • Mobile App Monitoring: Connect to the transmitter's Wi-Fi to monitor on multiple mobile devices via a smart app (recommended within 10m).
  • Wide Compatibility: Works with most HDMI video sources (DVD, DVR, TV Set-top Box, HD cameras, Notebooks, PS3/4/5) and display devices (HDTVs, projectors, monitors).
  • Multiple Power Supply: Can be powered via Type-C 5V or DC 9-16V.

3. Package Contents

Please check the contents of your package upon arrival. All items come without a retail box unless specified.

For "1 TX and 1 RX" Option:

  • JM300 Pro 4K Wireless Transmitter x 1
  • JM300 Pro 4K Wireless Receiver x 1
  • 5V 2A Power Adapter x 2
  • USB Power Cable x 2
  • User Manual x 1

For "RX Only" Option:

  • JM300 Pro 4K Wireless Receiver x 1
  • 5V 2A Power Adapter x 1
  • USB Power Cable x 1
Packing List for 1 TX and 1 RX

Image: Packing list for the 1 TX and 1 RX kit, showing both units, power adapters, USB cables, and user manual.

4. Setup Instructions

Follow these steps to set up your Qkens JM300 Pro Wireless HDMI Extender:

  1. Connect Power and Source to TX: Connect the power supply to the Transmitter (TX) unit. Then, connect your HDMI video source device (e.g., camera, laptop, game console) to the HDMI Input port on the TX unit.
  2. Connect Power and Display to RX: Connect the power supply to the Receiver (RX) unit. Then, connect your TV or monitor to one of the HDMI Output ports on the RX unit.
  3. Adjust Display Input: On your TV or monitor, select the correct HDMI input channel that the RX unit is connected to.
  4. Start Operation: The TX and RX units should automatically pair and display the video signal.
Point-to-point connection setup

Image: Diagram showing a point-to-point connection setup with a laptop connected to the TX unit, wirelessly transmitting to the RX unit connected to a large display.

5. Operating Instructions

Basic Operation (Point-to-Point)

Once connected as per the setup instructions, the JM300 Pro operates as a plug-and-play device. It does not require Wi-Fi, internet, Bluetooth, or a dedicated app for basic point-to-point video transmission.

Multi-Receiver Setup (1 TX to 4 RX)

The system supports one Transmitter (TX) broadcasting to up to four Receivers (RX). Each RX unit can connect to two monitors, allowing for a total of up to eight monitors displaying the same source.

1 TX to 4 RX setup diagram

Image: Diagram illustrating one TX unit transmitting to four RX units (RX1, RX2, RX3, RX4), each connected to two monitors, showing support for up to 8 monitors.

Dual Display on Receiver (RX)

Each RX unit is equipped with two HDMI output ports, allowing you to connect two displays simultaneously for dual display functionality.

RX Dual HDMI Out-Dual Display

Image: The RX unit with two HDMI OUT ports labeled, connected to a laptop and a smaller monitor, demonstrating dual display capability.

Mobile App Monitoring

For advanced monitoring, you can connect to the Wi-Fi network broadcast by the Transmitter (TX) unit. After installing the dedicated smart app on your mobile device, you can watch the video feed on multiple devices simultaneously. For optimal performance, app monitoring is recommended within 10 meters of the TX unit.

RX Dual Display with App Monitoring

Image: Diagram showing a Transmitter (TX) connected to two Receivers (RX1, RX2), with each RX unit outputting to two monitors and also streaming to a mobile app, illustrating RX Dual Display and app monitoring.

Power Supply Options

The JM300 Pro supports multiple power supply methods:

  • Type-C Port: Connect a power bank or a standard 5V 2A USB power adapter via the Type-C port.
  • DC 9-16V Port: A dedicated DC 9-16V power input port is also available for more robust power solutions.
Multi Power Supply Methods

Image: Close-up of the TX/RX unit showing the Type-C 5V2A port and the DC 9-16V power input port.

Video Demonstration

Video: A demonstration of the Qkens JM300 Pro in operation, showing the TX and RX units connected to a laptop and a TV, displaying synchronized video content.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Avoid dropping or subjecting the device to strong impacts.
  • Ventilation: Ensure the ventilation openings are not blocked to prevent overheating.

7. Troubleshooting

No Signal on Display:

  • Check Power: Ensure both TX and RX units are properly powered on.
  • Check HDMI Cables: Verify that all HDMI cables are securely connected to both the source and display devices, and to the TX/RX units.
  • Display Input: Confirm your TV/monitor is set to the correct HDMI input channel.
  • Source Output: Ensure your HDMI source device is outputting a signal.
  • Distance/Obstacles: Reduce the distance between TX and RX, or remove any major obstacles.

Interference or Poor Signal Quality:

  • Change Channel: The device supports 9 frequency channels. Try switching to a different channel to avoid interference from other wireless devices.
  • Reduce Distance: Move the TX and RX units closer to each other.
  • Minimize Obstacles: Ensure a clear line of sight between the TX and RX units.

App Monitoring Issues:

  • Wi-Fi Connection: Ensure your mobile device is connected to the Wi-Fi network broadcast by the TX unit.
  • Distance: App monitoring is most reliable within 10 meters of the TX unit.
  • App Installation: Verify the smart app is correctly installed and updated on your mobile device.

8. Specifications

JM300 Pro Specifications Table

Image: Detailed specifications table for the JM300 Pro.

ParameterValue
Power ConsumptionTX 4W, RX 4W
Power SupplyDC 9-16V, Type-C 5V
Working Frequency9 5G Frequency Bands
Channel Bandwidth40M
Debug ModeOFDM
Support PortTX: HDMI Input and HDMI Loop Out; RX: HDMI Dual Output
1080P Version Resolution1080P60, 1080P50, 1080P30, 1080P25, 720P60, 720P25
4K Version Resolution1080P@60/50/30/25, 4K@30, 720P@60/25
Operating Temperature0~50°C
Storage Temperature-40~70°C
Latency0.06S
Transmission Conditions (Open Conditions)200m
Dimensions (W x H)67.2mm X 115.6mm

9. User Tips

Based on available information, no specific user tips or common usage advice were found. Always ensure all components, especially antennas, are present and correctly attached for optimal performance.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.