Aoocci C6 Pro

Contents

Aoocci C6 Pro Motorcycle CarPlay & Android Auto GPS Navigation System User Manual

Model: C6 Pro

Important Safety Information

Please read this manual carefully before use and keep it for future reference.

  • Check all accessories before installation.
  • Do not use a high-pressure water gun to flush the host and cameras. The product is waterproof against rain, but not high-pressure water.
  • Do not use alcohol, stain removal solutions, or other corrosive solvents to wipe the host and lens. This can damage the product's appearance and waterproofness.
  • Ensure all units are connected before turning on the power.
  • Do not fold the cable lines during installation.
  • Press the rubber plugs firmly after inserting them to ensure the product's waterproof integrity.

Product Overview

The Aoocci C6 Pro is an all-in-one motorcycle dash cam system featuring a 6.25-inch IPS display with Wireless CarPlay and Android Auto compatibility, built-in GPS, dual 1080P cameras, and Tire Pressure Monitoring System (TPMS).

Main Components

The package includes the following main parts:

Aoocci C6 Pro Main Parts

Image: Exploded view of the Aoocci C6 Pro main components including the host, cameras, TPMS, and controller.

  • Host & Sunshade
  • Front Camera
  • Rear Camera
  • TPMS (Tire Pressure Monitoring System)
  • Controller
  • USB Test Cable
  • Power Cable
  • Camera Connection Cables
  • Bracket (suitable for 16-36mm diameter handlebars)
  • User Manual
  • 64GB TF Card

Key Functions and Parts Diagram

Aoocci C6 Pro Main Parts Diagram

Image: Diagram illustrating the main parts of the C6 Pro host and their functions.

  • Host Hood Screw Hole: For securing the host.
  • Power Cable: Connects to the motorcycle's power.
  • Rear Lens / Front Lens: Inputs for the dual cameras.
  • Memory Card Slot / TYPE-C Connector: For TF card and data transfer/charging.
  • GPS: Integrated GPS module.
  • Power Indicator: Shows power status.
  • Video Indicator Light: Indicates video recording status.
  • Speaker: For audio output.
  • Thermal Module: For heat dissipation.
  • Holes for Bracket Screws: For mounting the device.

Setup Instructions

Installation

The C6 Pro is designed for easy installation on motorcycles. The bracket is suitable for handlebars with a 16-36mm diameter.

Easy to Install and Remove Diagram

Image: Diagram showing the placement of the host, cameras, controller, and power cable on a motorcycle.

  1. Mount the Host: Secure the host and sunshade to your motorcycle's handlebars using the provided bracket and tools.
  2. Install Cameras: Mount the front and rear cameras in desired positions.
  3. Connect Cables: Connect the camera connection cables, power cable, and controller to the host.
  4. Secure Connections: Ensure all connections are firm and cables are routed safely, avoiding any moving parts or heat sources.

Power Connection

The device features ACC auto power-on, powering up automatically when you start your motorcycle.

Wiring Diagram for Power Connection

Image: Wiring diagram for connecting the C6 Pro to the motorcycle's power supply.

  1. Prepare Multimeter: Set your multimeter to DC mode.
  2. Identify Negative Pole: Connect the black test lead of the multimeter to the negative battery pole.
  3. Find ACC Line: Connect the red test lead to the test line. When the ACC is OFF, the multimeter should show no output. When the ACC is ON, it should show 12V. This indicates the ACC power line.
  4. Connect Power Cable: Connect the device's power cable to the identified ACC power line and the motorcycle's battery.

Memory Card Installation and Formatting

  • Use a certified 8-256GB MICRO TF memory card with a CLASS 10 classification or above.
  • Insert the TF card into the memory card slot.
  • Format before first use: Navigate to the 'Settings' menu on the device, then select 'Format SD' to format the memory card.
  • Regularly format the memory card to prevent fragmentation and ensure optimal performance.

Tire Pressure Monitoring System (TPMS) Installation and Pairing

TPMS Installation Guide

Image: Diagram showing TPMS sensor dimensions and installation guide on a motorcycle wheel.

  1. Install Sensors: First, install the reverse of the TPMS sensors to the bottom of the tire valve.
  2. Access TPMS Settings: On the device, navigate to the 'Main Settings' screen and click the TPMS icon to enter the tire pressure settings.
  3. Set Units and Alarms: Set the tire pressure unit (Bar or Psi) and air pressure alarm values according to your needs.
  4. Pair Front Sensor: The 'FRO' tire pressure number on the screen will flash. At this point, set the front wheel A (FW). The blinking will stop when pairing is complete.
  5. Pair Rear Sensor: Continue to pair the rear wheel B (RW) while 'BAC' is blinking. The blinking will stop when pairing is complete.
  6. Secure Sensors: After successful pairing, screw the reverse lug nuts back against the tire pressure sensors to prevent them from falling out.
  7. Re-inflation: If you need to re-inflate the tire, loosen the reverse nut first, then screw the sensor. After inflation, the tire pressure should display successfully without re-pairing. If the value is not displayed, ride for a certain distance, and it should appear. If issues persist, re-pair the sensor.

Operating Instructions

Main Menu Screen

Aoocci C6 Pro Main Menu Screen

Image: Overview of the main menu interface on the C6 Pro display.

The main menu provides quick access to various functions:

  • Home: Returns to the previous page.
  • Volume Adjustment: Adjusts audio output volume.
  • GPS: Displays GPS status and information.
  • G-sensor: Manages G-sensor settings.
  • LED Reminder Light: Steady green indicates normal power supply; flashing red indicates no memory card. Steady green with memory card indicates no recording; flashing green indicates normal recording.
  • CarPlay / Android Auto: Connects to your smartphone for navigation, calls, music, etc.
  • Playback: Accesses recorded videos and photos.
  • Date/Time: Displays current date and time.
  • Motorcycle Driving Recorder: Accesses dash cam recording functions.
  • Tire Pressure: Displays real-time tire pressure and temperature.

Wireless CarPlay and Android Auto Connection

The C6 Pro supports wireless CarPlay and Android Auto, allowing seamless integration with your smartphone.

Wireless CarPlay and Android Auto Interface

Image: Screenshot of the CarPlay and Android Auto interface on the C6 Pro display, showing various applications.

  1. Ensure both Bluetooth and Wi-Fi functions are enabled on your mobile phone.
  2. On the C6 Pro home page, click the "Interconnect" window.
  3. Click the CarPlay or Android Auto icon and follow the on-screen prompts.
  4. For the first connection, turn on your phone's Bluetooth and connect to the host's Bluetooth. Wait 5-10 seconds. When your phone's Wi-Fi is active, the Android Auto interface will automatically transmit. Click the home button to return to the dash cam's main interface.

Main Settings Screen

Aoocci C6 Pro Main Settings Screen

Image: Screenshot of the main settings menu on the C6 Pro display.

To access the main settings, click the gear icon on the home screen. Available settings include:

  • Language: Select from multiple languages.
  • Time Setting: Set the host time (updates automatically when connected to GPS/Wi-Fi/Bluetooth).
  • Phone Audio: ON/OFF toggle for phone sound playback via the host.
  • Key Volume: ON/OFF toggle for touch key tones.
  • Wi-Fi Switch: ON/OFF toggle. Wi-Fi connection range is approximately 10 meters without obstruction.
  • Pressure: Access TPMS pairing settings.
  • Screen Saver: Set the auto-lock time for the screen.
  • GPS Info: Check GPS signal information.
  • Format SD: Format the memory card.
  • Reset: Reset the host to factory settings.
  • Version: Check firmware version, Bluetooth name, and Wi-Fi name/password.

Driving Recorder Functions

Aoocci C6 Pro Driving Recorder Screen

Image: Screenshot of the driving recorder interface on the C6 Pro display.

From the driving recorder interface, you can:

  • Homepage: Return to the previous page.
  • Settings: Enter the recorder menu.
  • Playback: Return to the playback interface.
  • Recording: Turn voice recording ON/OFF.
  • Lock: Lock/unlock front and rear camera pictures.
  • Take a Photo: Capture a picture from both cameras simultaneously.
  • Video Recording: Start/pause video recording.
  • Time/Date: Displays current time and date.
  • Altitude: Displays current altitude.
  • Position: Displays current GPS position.
  • Speed: Displays current speed.

Recorder Setup Menu

Aoocci C6 Pro Recorder Setup Menu

Image: Screenshot of the recorder setup menu for configuring camera and recording settings.

Access this menu by clicking the settings button within the recorder interface:

  • Resolution: Set video recording resolution.
  • Loop: Set loop recording duration (1/3/5 minutes).
  • G-sensor: Adjust collision sensitivity settings.
  • Date: Enable/disable time watermark on recordings.
  • GPS Switch: Toggle GPS signal ON/OFF.
  • Recording: Adjust video sound settings.
  • GPS Speed: Enable/disable GPS speed record.
  • Compass: Display compass bearing.
  • Back: Enable/disable rear lens mirror function.

Playback Interface

Aoocci C6 Pro Playback Interface

Image: Screenshot of the video playback interface on the C6 Pro display.

From the playback interface, you can:

  • Back: Return to the previous screen.
  • Play: Start video playback.
  • Full Screen: View video in full screen.
  • Lock: Lock selected video files.
  • Delete: Delete selected video files.
  • Regular Video Recording: Access standard recorded videos.
  • Pictures: View captured photos.
  • Locked Videos: Access videos protected by the G-sensor.
  • Video Files: Browse all video files.

Wi-Fi Connection and KYCAM2 App

The C6 Pro can connect to your smartphone via Wi-Fi for app control and file management.

Aoocci C6 Pro Wi-Fi Connection Screen

Image: Screenshot of the Wi-Fi settings screen on the C6 Pro display.

  1. Enable Wi-Fi: On the C6 Pro, ensure Wi-Fi is enabled in the main settings.
  2. Connect on Phone: On your phone, go to WLAN settings, find the network named "MT91CXXX", and enter the password "12345678" to connect.
  3. App Prompt: If your Android phone prompts "no internet access in this network", select "connect only this time" or "always connect". (Note: The dash cam's Wi-Fi is for device-app communication only, not internet access).

iOS System Connection Procedure

iOS Wi-Fi Connection Procedure

Image: Screenshots showing iOS settings for Wi-Fi and location permissions for the KYCAM2 app.

  1. Wi-Fi Connection: In iOS Settings > Wi-Fi, select the MT91C network and enter password "12345678".
  2. KYCAM2 App Permissions: Open the KYCAM2 app. When prompted for GPS location, select "Allow when using APP". When prompted to connect to the local network, allow it.
  3. App Functions: The app's functions will be updated over time.

Wired Remote Control

Wired Remote Control Functions

Image: Diagram showing the wired remote control mounted on handlebars with its functions labeled.

The wired remote control allows for easy operation without touching the main unit:

  • Answer calls.
  • Switch between front and rear cameras.
  • Turn the camera recording ON or OFF.

Video Demonstration

Video: A demonstration of the Aoocci C6 Pro's features, including the interface, camera views, and general operation.

Maintenance

  • Memory Card: Regularly format the TF memory card (e.g., monthly) to prevent data fragmentation and ensure smooth recording.
  • Cleaning: Clean the host and camera lenses with a soft, dry cloth. Avoid using alcohol, stain removal solutions, or other corrosive solvents.
  • Waterproof Seals: Periodically check that all rubber plugs and seals are properly seated to maintain the device's IP67 waterproof rating.
  • Firmware Updates: If your device displays an outdated interface, you may need to manually update the system using a TF card. Download the firmware to the TF card and insert it. Refer to the official product links for specific update instructions or videos.
System Upgrade Interface

Image: Illustration showing the system interface before and after a firmware update.

Troubleshooting

How to disconnect CarPlay or Android Auto?
Turn off the Wi-Fi on your phone or forget the Bluetooth device connection.
How do I reconnect CarPlay or Android Auto after manually disconnecting it?
Simply reconnect to the dash cam via Bluetooth.
How do I reconnect CarPlay or Android Auto after restarting the dash cam?
It will automatically reconnect when both Bluetooth and Wi-Fi are enabled on your phone.
How to use the KYCAM2 App when connected to CarPlay?
Both CarPlay and the KYCAM2 App can be operated simultaneously.
TPMS sensor pairing issues?
If a sensor is not pairing, ensure it is installed correctly and that the air pressure unit of your inflation tool is consistent with the host settings. Follow the re-pairing steps in the TPMS installation section.
SD card not formatting or recognized?
Ensure you are using a certified 8-256GB Class 10 TF memory card. If issues persist, try formatting the card on a computer first, then re-attempt formatting on the device.
Does the navigation work with offline maps without a phone connection?
No, the device does not have an offline map function and still requires a phone connection for navigation.
Does the device display blind spot detection (BSD)?
No, the C6 Pro model does not feature Blind Spot Detection.

Specifications

FeatureSpecification
Brand NameAoocci
ModelC6 Pro
OriginMainland China
Protection LevelIP67
Screen ProjectionWireless Apple CarPlay & Android Auto
Built-in BatteryCoin cell batteries
Cameras2 (Front and Rear)
Display6.25-inch IPS Touch Screen (1520*720 resolution)
Parking MonitorYes
Wi-Fi/APP InterfaceYes
GPS TrackYes (Built-in GPS for navigation and route tracking)
Video FormatTS
Video Compression FormatH.264
Resolution1080P (Dual 1080P 30fps recording)
Viewing Angle140° Wide Viewing Angle
Max External Memory256GB (TF Card)
Memory Card Capacity8-256GB C10 Memory Card
Voltage Requirement12-30V to 5V 2A
MaterialABS

User Tips

  • Date Format: The device's date format may default to YYYY/MM/DD. Check the settings menu for an option to change it to MM/DD/YYYY if preferred.
  • Quick Boot-up: The device boots up very fast and connects to phones quickly, especially for Android Auto.
  • TPMS Pairing: If you encounter issues pairing the rear wheel sensor, ensure you follow the specific steps provided in the manual, including installing the sensor in reverse and then pairing. The seller may also provide video guidance for this process.
  • Anti-Theft: The high-strength mounting kit includes customized anti-theft screws to deter quick removal. Consider using these features to secure your investment when parking your bike.

Warranty and Support

For detailed warranty information, please refer to the official product page or contact the seller directly. The product complies with relevant international standards.

Compliance Certificates

Certificate of Conformity RoHS

Image: Certificate of Conformity, indicating RoHS compliance for the C6 Pro.

EC-RED Certificate

Image: EC-RED Certificate, confirming compliance with European radio equipment directives.

Test Report ETSI EN 301 893 V2.1.1

Image: Test Report for ETSI EN 301 893 V2.1.1, detailing compliance testing.

A comprehensive user manual in PDF format is available for download: Download User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.