SEAMETAL D40860

Contents

SEAMETAL Retro Mini Bulb Car Ambient Light

Model: D40860

Brand: SEAMETAL

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your SEAMETAL Retro Mini Bulb Car Ambient Light. Designed to add a soft, warm glow to your car's interior, this ambient light enhances the atmosphere of every journey. Please read this manual thoroughly before use to ensure proper function and safety.

Important Safety Notes

  • The product is powered by two CR2032 button batteries. The total illumination duration depends on the capacity of the batteries installed. Typically, the illumination lasts for about 12 to 36 hours.
  • As the battery capacity diminishes during use, the brightness of the product's light will gradually decrease. This is a normal phenomenon.
  • Avoid using the product outside its operating temperature range (-20°C to +70°C); otherwise, the battery may discharge rapidly or the product's electronic components could be damaged.
  • The product is not waterproof. Keep it away from rainwater or excessive moisture.
  • Keep out of reach of children and pets. If ingested, seek medical attention immediately.
  • The product's transparent lens is relatively scratch-sensitive. When cleaning, we recommend gently wiping it with a soft, glasses-cleaning cloth.

Product Overview

The SEAMETAL Retro Mini Bulb Car Ambient Light is a compact and elegant accessory designed to provide subtle interior lighting. It features a transparent bulb design and a simple button interface for control.

SEAMETAL Retro Mini Bulb Car Ambient Light hanging from a rearview mirror
The SEAMETAL Retro Mini Bulb Car Ambient Light in use.
Close-up of the mini bulb showing the power button and battery compartment
The small bulb is powered by two CR2032 button batteries.

Installation Instructions

  1. Adjust the Cord Length: First, adjust the length of the double line (cord) to your desired hanging position.

    Step 1: Adjusting the length of the hanging cord
    Adjust the length of the double line.
  2. Position on Rearview Mirror: Pass the adjusted cord around your car's rearview mirror. Thread the small light bulb through the double wire to secure it.

    Step 2: Passing the cord around the rearview mirror
    Pass around the rearview mirror and thread the small light bulb through the double wire.
  3. Fine-tune Hanging Length: Press and hold the adjustment buckle on the cord to fine-tune the hanging length. Adjust it to an appropriate position that does not obstruct your view.

    Step 3: Adjusting the hanging length with the buckle
    Press and hold the adjustment buckle to adjust to the appropriate hanging length.
  4. Conceal Adjustment: Try to conceal the adjustment knob behind the rearview mirror for a more aesthetically pleasing installation.

    Step 4: Concealing the adjustment knob
    Try to conceal the adjustment knob behind the rearview mirror for a more aesthetically pleasing look.
  5. Final Adjustment: Finally, tuck any excess length of the cord into the knot to keep it tidy.

    Step 5: Tucking excess cord into the knot
    Tuck the excess length into the knot.

Friendly Reminder:

After installation, double-check whether the main driver's view is obstructed and make adjustments as needed. Safety comes first—we recommend keeping the suspension length moderate; the shorter the suspension, the less sway during driving.

Operating Instructions

The ambient light features a single button for controlling its functions. Refer to the diagram below for button location and functions.

Diagram showing button functions and dimensions
Button Functions and Product Dimensions.

Button Functions:

  • Short Press (Cycle through gears):
    • Tier 1: Turns off automatically after 10 minutes of continuous use.
    • Second Gear: Breathing light mode, automatically turns off after 10 minutes.
    • Three Gears: Always-on display.
    • Four Gears: Turn off the lights.
  • Long Press (3 seconds): Press and hold the button for 3 seconds to switch between warm white and warm yellow light tones.
Image showing warm white and warm yellow light options
Long press to switch between warm white and warm yellow light.

Product Video:

Demonstration of the ambient light's features and appearance in a car interior.

Specifications

Attribute Detail
Product Name Small bulb car ambient light
Product Model D40860 (also referred to as DP01)
Power Supply Type CR2032 button battery *2
Operating Voltage DC 3.5-6.5 V
Operating Current 5-25mA
Operating Temperature 0 ~ +60°C
Storage Temperature -20 ~ +70°C
Product Dimensions 44mm (Width) * 89mm (Height) * 25mm (Depth)
Package Dimensions 145mm * 145mm * 38mm
Material ABS
Item Type Atmosphere lamp

Maintenance

Battery Replacement:

When the light dims significantly or stops working, it's time to replace the CR2032 button batteries.

  1. Remove Lighting Assembly: Gently pull the lighting assembly (the bulb part) firmly out of the housing (the black cap). Be careful not to touch the front of the lamp panel as much as possible to prevent stains or scratches.

    Image showing how to pull out the lighting assembly
    Pull the lighting assembly firmly out of the housing.
  2. Replace Batteries: Dispose of the old batteries responsibly. Reinstall new CR2032 button batteries into the compartment. Ensure the battery's positive terminal is facing up.

  3. Reassemble: Reinstall the outer casing, making sure it clicks securely into place.

Cleaning:

The transparent lens is delicate. To clean, gently wipe it with a soft, lint-free cloth, such as a glasses-cleaning cloth. Do not use abrasive cleaners or harsh chemicals.

Troubleshooting

  • Light not turning on:
    • Check if the batteries are correctly installed with the positive terminal facing up.
    • Replace the CR2032 button batteries with new ones.
    • Ensure the product is within its operating temperature range.
  • Light is dim:
    • The batteries may be low. Replace them with new CR2032 button batteries.
  • Cannot switch colors:
    • Ensure you are performing a long press (3 seconds) to switch between warm white and warm yellow.
  • Product arrived with a Type-C charger / is rechargeable:
    • Please note that this model (D40860) is specified to use CR2032 button batteries. If your product came with a Type-C charging port or charger, you may have received a different variant or model. Please refer to any specific instructions provided with that variant or contact customer support for clarification.

User Tips

  • Optimal Hanging Position: Adjust the hanging cord length to ensure the light does not obstruct your view while driving. A shorter suspension can help reduce sway.
  • Battery Life: Expect approximately 12 to 36 hours of continuous lighting, depending on the battery brand and usage environment.
  • Aesthetic Placement: Conceal the adjustment buckle behind the rearview mirror for a cleaner look.
  • Color Preference: Experiment with both warm white and warm yellow light tones by long-pressing the button for 3 seconds to find your preferred ambiance.

Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the SEAMETAL customer service directly. Keep your purchase receipt for any warranty claims.

A user manual in PDF format may also be available for download from the product page or seller's website.

© 2024 SEAMETAL. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.