1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of the VaneAims Emergency Stop Push Button Switch Box. This device is designed to provide a quick and reliable method to shut off power in emergency situations.
The control box features a sturdy and durable shell with reliable sealing for dustproof protection. It is equipped with silver alloy contacts for long service life and efficient operation.
2. Package Contents
Depending on your order, the package may contain the following:
- Box+Button (No LED): 1 x Emergency Stop Push Button Switch (No LED) + 1 x Box + 1 x Cable Gland Joint
- Box+Button (RED LED): 1 x Emergency Stop Push Button Switch (RED LED) + 1 x Box + 1 x Cable Gland Joint
- Box ONLY (no button): 1 x Box + 1 x Cable Gland Joint
3. Specifications
| Parameter | Detail |
|---|---|
| Product Name | Emergency Stop Push Button Switch Box |
| Brand | VaneAims |
| Casing Feature | Thickened Shell (approx. 4mm Thickness), Impact Resistant |
| Product Size (L×W×H) | 85.7 × 85.7 × 108mm |
| Color Scheme | Yellow (Casing), Black (Base) |
| Switch Type | Push Button Switch |
| Contact Type | 2NC (2 Normally Closed contacts) |
| Rated Insulation Voltage (Ui) | 400V |
| Rated Thermal Current (Ith) | 10A |
| Material | Plastic |
| Is Smart Device | No |
| Origin | Mainland China |
| EU LVD Voltage | Low voltage: Below 50Vac or 75Vdc |
| High-concerned chemical | None |
4. Safety Information
WARNING: Disconnect the power supply before wiring or performing any maintenance on the switch.
- Ensure the switch is installed in a location easily accessible for emergency use.
- Avoid installing the switch in areas with high-temperature, high-humidity, or corrosive environments.
- For the 'No LED' version, the actual applied voltage must not exceed 400V.
- If you have the 'Box Only' version, ensure your chosen switch is compatible with the box dimensions before installation.
5. Setup and Installation
5.1 Wiring
The emergency stop switch uses 2 Normally Closed (2NC) contacts. Refer to the wiring diagram below for proper connection.
Connect the Neutral line and Live wire to the appropriate terminals as indicated in the diagram. The load should be connected in series with the switch's normally closed contacts to ensure power interruption when the button is pressed.
5.2 Cable Gland Installation
The box includes a knock-off hole design for installing connectors. Use a screwdriver or other suitable tool to carefully penetrate the outlet hole to install the provided cable gland joint. The large internal space of the box facilitates easy installation and wiring.
6. Operating Instructions
- To Activate (Stop): Push the red mushroom head button to cut off power. The button will latch in the pressed position, fixing the power cut-off state.
- To Reset: Rotate the button in the direction of the arrows (typically clockwise) to release the latch and restore power.
7. Maintenance
- Cleaning: Periodically clean the exterior of the switch box with a soft, damp cloth. Avoid using abrasive cleaners or solvents.
- Inspection: Regularly inspect the switch for any signs of physical damage, wear, or loose connections. Ensure the dustproof sealing ring is intact to prevent ingress of dust and moisture.
- Contact Longevity: The silver alloy contacts are designed for durability and a long service life, and are not prone to overheating under normal operating conditions.
8. Troubleshooting
- Switch not activating/deactivating: Check all wiring connections to ensure they are secure. Verify that the power supply is active.
- LED not lighting up (for LED versions): Ensure the correct voltage option was selected for the LED. Check the LED contact wiring.
- Physical damage: If the switch or box is physically damaged, it should be replaced immediately to ensure safety and proper function.
9. User Tips
- When ordering, the voltage option selected corresponds to the LED operating voltage if your switch is equipped with an LED.
- If you choose the 'No LED' version, ensure the actual voltage used in your application does not exceed 400V.
- For the 'Box Only' version, always double-check that the dimensions of your chosen push button switch are compatible with the VaneAims box before purchasing and installation.
- Consider the application environment. This switch is suitable for various uses including industrial, transportation, elevator systems, machinery, aerospace, and industrial CNC applications.
10. Warranty and Support
For any questions, technical support, or warranty inquiries, please contact the seller directly through the platform where the product was purchased.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)