1. Introduction
Preface
Thank you for choosing this Intelligent Car Information System. Our product adds CarPlay and Android Auto to vehicles lacking these features, letting you use them for music, navigation, and more—all via your car's original screen. A seamless upgrade, it bridges your smartphone and in-car display, bringing familiar interfaces without altering your vehicle's factory setup. Easy to integrate, it enhances connectivity safely, turning your existing infotainment system into a smart, intuitive hub. Modernize your drive affordably, leveraging what your car already has.
Safety Precautions
- Install only by qualified professionals to avoid damaging vehicle electrical systems.
- Disconnect car battery before installation to prevent short circuits.
- Ensure all connections are secure and insulated to avoid fire hazards.
- Do not block airbags, driver visibility, or vehicle controls during installation.
- Avoid modifying essential vehicle safety systems or wiring.
- Operate connected devices only when parked; never distract from driving.
- Regularly check for loose connections or overheating during use.
- Stop using immediately if unusual smells, sounds, or malfunctions occur.
- Ensure product usage complies with local traffic laws and regulations.
- Keep product away from water, extreme temperatures, and direct sunlight when not in use.
2. Product Features
- Wireless/Wired CarPlay: Seamlessly integrate your iPhone for navigation, music, calls, and messages.
- Wireless/Wired Android Auto: Connect your Android phone for safe access to essential apps.
- Voice Control: Utilize "Hey Siri" or Google Assistant for hands-free operation.
- Online Navigation: Use your favorite navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Online Music: Stream music directly through your car's audio system.
- Original Car Function Retention: Maintain use of steering wheel buttons and central control panel.
- Automatic Reconnection: Automatically connects to your device upon car startup.
- Front/Rear/360 Camera Input: Supports video decoding for front view, rear view (with intelligent dynamic trajectory display and radar support), and 360° panoramic view.
- Built-in DSP: Features a fully adjustable Audio EQ for optimal sound quality.
- Plug and Play Installation: Designed for non-destructive installation without cutting wires.
- Easy Switching: Switch between the OEM car system and the CarPlay/Android Auto system using factory controls.
- Bluetooth 5.0 & Dual-band WiFi: Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 technology.
Video: Product demonstration showing plug-and-play setup, easy connection, online music playback, phone calls, navigation, voice assistant, and auto reconnection.
3. Compatibility
BMW NBT System Compatibility
This kit is compatible with BMW vehicles equipped with the NBT system. Please verify your car's original radio homescreen menu and the LVDS port on the back of the OEM car screen.

Image: Step 1 shows a compatible NBT menu screen. Step 2 shows a compatible 6-pin LVDS port. Incompatible screens (CIC, EVO ID5, EVO ID6) and a 4-pin LVDS port are marked with an 'X'.
| Car Model | Year | Screen Size |
|---|---|---|
| 1 Series (F20/F21) | 2013-2015 | 6.5/8.8/10.25 inch |
| 2 Series (F22) | 2013-2015 | 6.5/8.8/10.25 inch |
| 3 Series (F30/F31/F34/F80) | 2012-2015 | 6.5/8.8/10.25 inch |
| 4 Series (F32/F33/F36) | 2013-2015 | 6.5/8.8/10.25 inch |
| 5 Series (F07/F10/F11/F18) | 2012-2015 | 6.5/8.8/10.25 inch |
| 6 Series (F06/F12/F13) | 2013-2016 | 6.5/8.8/10.25 inch |
| 7 Series (F01/F02/F03) | 2012-2014 | 6.5/8.8/10.25 inch |
| X3 (F25) | 2013-2016 | 6.5/8.8/10.25 inch |
| X4 (F26) | 2014-2016 | 6.5/8.8/10.25 inch |
| X5 (F15/F85) | 2014-2016 | 6.5/8.8/10.25 inch |
| X6 (F16/F86) | 2014-2016 | 6.5/8.8/10.25 inch |
| MINI (F56) | 2014-2016 | 6.5/8.8/10.25 inch |
BMW CIC System Compatibility
This kit is compatible with BMW vehicles equipped with the CIC system. Please verify your car's original radio homescreen menu and the LVDS port on the back of the OEM car screen.

Image: Step 1 shows a compatible CIC menu screen. Step 2 shows a compatible 4-pin LVDS port. Incompatible screens (NBT, EVO ID5, EVO ID6) and a 6-pin LVDS port are marked with an 'X'.
| Car Model | Year | Screen Size |
|---|---|---|
| 1 Series (E87) | 2008-2012 | 6.5/8.8/10.25 inch |
| 3 Series (E90/E91/E92/E93) | 2009-2012 | 6.5/8.8/10.25 inch |
| 5 Series (E60/E61) | 2008-2009 | 6.5/8.8/10.25 inch |
| 6 Series (F12/F13) | 2010-2012 | 6.5/8.8/10.25 inch |
| 7 Series (F01/F02) | 2011-2012 | 6.5/8.8/10.25 inch |
| X1 (E84) | 2009-2014 | 6.5/8.8/10.25 inch |
| X3 (F25) | 2011-2013 | 6.5/8.8/10.25 inch |
| X5 (F70) | 2009-2013 | 6.5/8.8/10.25 inch |
| X6 (E71/E72) | 2009-2013 | 6.5/8.8/10.25 inch |
| Z4 (E89) | 2009-2013 | 6.5/8.8/10.25 inch |
| MINI (R55/R56/R60) | 2008-2012 | 6.5/8.8/10.25 inch |
4. Installation Guide
Important: Installation should only be performed by qualified professionals. Always disconnect the car battery before starting installation.
Wiring Diagram

Image: Detailed wiring diagram showing connections for LVDS harnesses, power harness, AUX out, and external microphone. Note: If there is noise, unplug the AUX wire.
DIP Switch Settings
Adjust the DIP switches according to your car model and screen size. Ensure the dial is set to "ON" for the selected options. After changing DIP settings, restart the decoder by completely turning off and on the car engine for changes to take effect.
| Car Model | Year | Screen Size | DIP Setting |
|---|---|---|---|
| 6.5 inch | 2012-2016 | 6.5 inch | 24/134 ON |
| 8.8/10.25 inch | 2012-2016 | 8.8/10.25 inch | 35/34/124 ON |
Note: Since screen configuration cannot be obtained directly from the original system, all DIP options are provided. Try them one by one in order. After switching the DIP, be sure to restart the decoder for the changes to take effect.
5. Operating Instructions
5.1 Button Control
The system retains the use of your original car's steering wheel buttons and central control panel for seamless operation.

Image: Steering wheel buttons for volume and call control.
| Button | Operation | Function |
|---|---|---|
| Call icon | Short press | Answer the phone |
| Volume "+" | Short press | Increase the volume |
| Volume "-" | Short press | Decrease the volume |

Image: Central control panel with MENU button and rotary controller.
| Button | Operation | Function |
|---|---|---|
| MENU | Long press | Switch between OEM screen and CarPlay/Android Auto interface |
| Hazard light button | Double Click | Switch between OEM screen and CarPlay/Android Auto interface |
| Rotary controller | Swipe/Click | Control function volume |
5.2 Wireless Connection (CarPlay & Android Auto)
The system uses wireless CarPlay and Android Auto. For optimal performance, ensure your vehicle's audio system is set to Bluetooth music mode.
- Turn on your phone's Bluetooth and Wi-Fi.
- On your phone, select the Bluetooth device name "CAR Audio_XXXX" (or similar) and pair.
- Confirm the pairing request on your phone.
- Once Bluetooth pairing is successful, a Wi-Fi connection will be established for data transmission. The Bluetooth connection may disconnect to avoid interference; this is normal.
- For Android Auto, follow the on-screen prompts after successful Bluetooth pairing.

Image: Screenshots demonstrating the Bluetooth pairing process on a smartphone and the car's display, showing connection to "WirelessDongle-3AFF" and "Anyfar's iPhone".
5.3 AUX Sound Output
If your car does not have a Bluetooth function, you can use the AUX sound output.
- Connect the AUX cable to the factory system and plug the external microphone into the CarPlay Box.
- Select "AUX" from the factory NBT system's audio output options.
- Go to the system settings: Settings > Factory Settings > Phone link Settings.
- Uncheck the "Disable phone link audio (ON)" option.
- Save changes and reboot the decoder for the settings to take effect.

Image: Diagram showing AUX cable connection and screenshots of the system settings to disable phone link audio.
5.4 External Camera Input
The CarPlay interface supports various camera inputs for enhanced driving safety.
Rear View Camera Input
This CarPlay interface supports camera input for clear rearview imagery. Connect the camera as shown in the guide.

Image: Illustration of an optional AHD rear view camera displaying its feed on the car's screen, showing parking guidelines.
Radar and Trajectory Settings
If your aftermarket camera supports reversing trajectory lines or radar, adjust the settings as follows:
- Enter the system settings: Factory mode > Advanced mode.
- Enter the password "888888".
- Navigate to MCU Setup.
- Uncheck the "A0" option to enable the reversing rear view function.
- If your camera supports reversing trajectory lines, uncheck the "A1" box.
- For aftermarket radar, uncheck the "A2" box.
- If you want to connect a front camera, choose the "A3" option.
- Return to the previous level and click "Restart system" for changes to take effect.

Image: Screenshots of the MCU Setup menu showing options for A0, A1, A2, and A3 for camera and radar settings.
6. Specifications
| Parameter | Value | Parameter | Value |
|---|---|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) | Storage Temperature | -30 ~ +85°C |
| Operating Temperature | -30 ~ +75°C | Ambient Humidity | <98% (at 45°C), 65±5% (rated) |
| Power Consumption Current | 1A (rated), 3A (Max) | Shutdown Current | Current: 300mA (Clock is on) |
| Quiescent Current | less than 3mA | ||
| Charging Current | ≤2A; when the USB charging current >1A, the host machine should activate the circuit protect function to control the current within 15A and avoid products burning. | ||
7. Troubleshooting
7.1 Why does the Box's Bluetooth disconnect?
After the device information is confirmed through Bluetooth pairing, a Wi-Fi connection is established to transmit data. To avoid interference, the Bluetooth connection will be disconnected. This is a normal phenomenon.
7.2 I cannot connect CarPlay, but Bluetooth is already paired.
Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone (Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings).
7.3 Why is the wireless CarPlay not stable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this may impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel: Enter the CarPlay box settings (Factory Mode > Connectivity Settings > Hotspot Band) and select 1, 6, or 11, depending on your current region.
8. User Tips
- Professional Installation Recommended: The installation process can be complex. For best results and to avoid potential damage, professional installation is highly recommended.
- DIP Switch Reset: If you change the DIP switch settings, you must completely turn off the car engine and then restart it for the new settings to be recognized and applied.
9. Warranty and Support
For any technical issues or support inquiries, please contact our technical support team:
Email: techsupport@anyfar.com
Website: www.anyfar.com