Introduction
Thank you for choosing the UICYXOR Professional 4D Laser Level. This instrument is designed for precise horizontal and vertical alignment tasks in various applications, from home improvement to professional construction. Featuring advanced laser technology with red, blue, and green beam options, self-leveling capabilities, and a durable design, it provides reliable performance. Please read this manual thoroughly before operation to ensure safe and effective use of your device.
Safety Information
Always observe the following safety precautions to prevent injury and damage to the device:
- Laser Radiation: Do not stare directly into the laser beam. Avoid direct eye exposure.
- Power Source: Use only the charger supplied with the device. Ensure correct battery polarity when inserting.
- Environment: Operate the device within the specified temperature ranges. Avoid extreme temperatures, humidity, and direct sunlight for prolonged periods.
- Maintenance: Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Storage: Remove the battery if the instrument will not be used for a long time to prevent leakage and damage.
Package Contents
The contents of your package may vary depending on the specific model (8-line, 12-line, or 16-line) and promotional offers. A typical package includes:
- UICYXOR Professional 4D Laser Level
- Lithium Battery (1 or more, depending on model)
- Charger
- Anti-fall Cloth Bag
- Remote Control (for certain models)
- Lifting Platform (for certain models)
- Wall Bracket (for certain models)
Product Overview
Familiarize yourself with the components of your laser level:
| No. | Component | Control Panel Label | Function |
|---|---|---|---|
| 1 | Control panel | Interface for operating laser lines and modes | |
| 2 | Battery | Power source for the device | |
| 3 | Switch | Main power ON/OFF switch | |
| 4 | 360° horizontal line 1 | A | Activates the first horizontal laser line |
| 5 | 360 degree vertical line 1 | C | Activates the first vertical laser line |
| 6 | 360 degree vertical line 2 | C | Activates the second vertical laser line |
| 7 | 360° horizontal line 2 | A | Activates the second horizontal laser line |
| 8 | Vertical lifting platform | Adjusts the height of the laser level | |
| B | OUTDOOR Oblique line switch (for diagonal mode) |
Setup
- Battery Installation: Ensure the battery is charged. Insert the battery into its compartment, paying close attention to the positive and negative electrodes.
- Mounting the Instrument: Place the instrument on a stable surface, such as the included foot rest, a T-type bracket, or the lifting platform, as required for your task. The device also supports wall mounting.
- Power On: Push the main power switch forward to the 'ON' position. The machine will start, and the horizontal laser window will automatically open, emitting four horizontal radium rays.
Operating Instructions
- Horizontal Line Control: Touch the 'H' key on the control panel (or remote control) to turn horizontal lines ON or OFF.
- Vertical Line Control: Touch the 'V' key on the control panel (or remote control) once to open a vertical window (accompanied by a 'di' sound). Touch it again to open a second vertical window. A third touch will close both vertical windows.
- Self-Leveling: The device features magnetoresistive automatic leveling. If the instrument is tilted by more than 3 degrees, a buzzer alarm will sound, indicating it is outside its self-leveling range. Adjust the instrument's position until the alarm stops and the laser lines stabilize.
- Diagonal Function (Slope Mode): To activate the diagonal function, long-press the 'B' button (OUTDOOR Oblique line switch) on the control panel for more than 3 seconds until you hear a 'di' sound. In this mode, the laser lines will flash, and the alarm will be deactivated, allowing you to set the instrument at any desired angle. To exit diagonal mode, long-press the button again for more than 3 seconds until you hear a 'di' sound, and the instrument will return to normal operation.
- Remote Control: Use the remote control for convenient operation of the instrument from a distance.
Maintenance
- Battery Care: Always ensure the battery is installed with correct polarity. If the instrument will not be used for an extended period, remove the battery to prevent potential damage from leakage.
- Charging: Use only the charger specifically designed for this machine.
- Cleaning: Keep the laser windows and housing clean from dust and debris. Use a soft, dry cloth for cleaning. Avoid abrasive cleaners or solvents.
- Storage: Store the instrument in its anti-fall cloth bag in a dry, cool place, away from direct sunlight and extreme temperatures.
- Environmental Use: Use the machine in environments consistent with its design specifications (e.g., within specified operating temperatures and humidity). The device is waterproof, drop-proof, and dust-proof, but proper care extends its lifespan.
Troubleshooting
If you encounter issues with your laser level, refer to the following common problems and solutions:
- Laser lines are not visible or dim:
- Check battery level and recharge if necessary.
- Ensure the laser windows are clean.
- Operating in very bright conditions (e.g., strong sunlight) can make lines less visible. Consider using a laser receiver for outdoor use.
- Buzzer alarm sounds continuously:
- The instrument is likely tilted beyond its self-leveling range (±3°). Place it on a more level surface or adjust the lifting platform until the alarm stops.
- Laser lines are flashing:
- If the lines are flashing and the alarm is off, the device is likely in diagonal (slope) mode. Long-press the 'B' button for more than 3 seconds to exit this mode.
- If the lines are flashing and the alarm is on, the device is out of its self-leveling range.
- Remote control not working:
- Check the battery in the remote control.
- Ensure there are no obstructions between the remote and the laser level.
Specifications
| Feature | Specification |
|---|---|
| Laser Light Configuration | 360° X3 12 line (3D) / 360° X4 16 line (4D) |
| Laser Wavelength | Red: 650nm, Blue: 515nm, Green: 532nm |
| Vertical Accuracy | ±0.2mm/10m |
| Automatic Leveling Range | ±3° |
| Waterproof Level | IP-54 |
| Working Range | 25 meters in diameter |
| Working Hours | Approximately 5 hours |
| Green Light Operating Temperature | -5°C to 50°C |
| Blue Light Operating Temperature | -20°C to 50°C |
| Red Light Operating Temperature | -20°C to 50°C (Customization may be required) |
| Battery Included | Yes (18650 Lithium Battery) |
| Certification | CE |
| Origin | Mainland China |
| Plug Type | EU/US/UK/AU (depending on region) |
| Additional Features | Power Display, Smart Chip, Touch Buttons, Visible Outdoors |
User Tips
- For optimal visibility in bright conditions, especially outdoors, consider using a laser receiver (sold separately) to detect the laser line.
- When working on sloped surfaces, remember to activate the diagonal mode to prevent the continuous buzzer alarm.
- Always double-check your measurements, especially when calculating allowable deviation for large distances. The formula for maximum allowable deviation is:
dmax = 2 * wall spacing * 0.2 mm/m. For example, if the wall spacing is 5 meters, the maximum allowable deviation is 2mm. - Keep the remote control handy for quick adjustments without needing to approach the unit, improving efficiency.
Warranty and Support
This product is designed for durability and performance. For detailed warranty information, please refer to the official product documentation. For any support inquiries or technical assistance, please contact the seller or manufacturer directly.
A comprehensive user manual in PDF format is available for download. You can access it here.
The product also offers a free return policy within 90 days of purchase. Please consult the seller's return policy for specific terms and conditions.