Important Disclaimer
⚠️ Warning: If you are younger than 18, do not use this device. You should consult a doctor, preferably an ear-nose-throat doctor (an ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
Introduction
This manual provides comprehensive instructions for the Unitron Ativo SP and Ativo UP Bluetooth hearing aids. These advanced digital hearing instruments are designed to provide clear sound and seamless connectivity for individuals with mild to severe hearing loss. Please read this manual thoroughly to ensure proper use, care, and maintenance of your hearing aids.
The Unitron Ativo SP and Ativo UP are Behind-The-Ear (BTE) style hearing aids featuring advanced Bluetooth connectivity for pairing with smartphones and other devices. They offer powerful output, customizable control via the Unitron Remote Plus App, feedback cancellation, noise reduction, and directional microphones for clear sound.

Figure 1: Unitron Ativo SP/UP Hearing Aids with Remote Plus App Interface

Figure 2: Unitron Ativo Hearing Aids with Remote Plus App Interface, showing Advanced and Classic Modes
Setup
1. Parts of Your Hearing Aids
Your Unitron Ativo hearing aids consist of several key components:
- Earhook: Connects your custom earmold to the hearing aid.
- Microphone: Captures sound from your environment.
- Multi-function button: Used for program changes, volume control, and call management.
- Battery door (on & off): Closes to turn on, opens fully to turn off or change battery.
- Tubing: Part of the earmold that attaches to the earhook.
- Earmold: Directs sound to your ear and secures the hearing aid.
- Slim tube: Transmits sound to the ear canal (for Slim tube models).
- Dome: Holds the slim tube in place in the ear canal.
- Retention piece: Helps prevent the dome and speaker unit from moving out of the ear canal.
2. Identifying Left & Right Hearing Aids
Each hearing aid has a color marking on its back to indicate its intended ear:
- Blue marking: For the left hearing aid.
- Red marking: For the right hearing aid.
3. Battery Insertion
Your hearing aids use zinc-air batteries. Refer to the specifications for the correct battery size for your model (312, 13, or 675).
- Remove the sticker from the new battery and wait 2 minutes before insertion.
- Open the battery door completely.
- Place the battery in the battery door with the flat side facing upwards. The flat side is typically marked with a "+" symbol.
Note: If the battery door is difficult to close, ensure the battery is inserted correctly with the flat side up. Incorrect insertion can damage the hearing aid and prevent it from working.
4. Putting on Your Hearing Aids
4.1 With Classic Earmold:
- Take the earmold up to your ear and place the ear canal part into your ear canal.
- Place the hearing aid behind your ear.
- Insert the upper part of the earmold into the upper part of the bowl of your ear.
4.2 With Dome, SlimTip, or Universal Eartip:
- Place the hearing aid behind your ear.
- Insert the earpiece into your ear canal.
- If an anchor is attached to the earpiece, tuck it into the bowl of your ear to secure the hearing aid.
Operating Instructions
1. Turning On and Off
The battery door functions as the on/off switch:
- To turn on: Close the battery door fully. The hearing aid may take up to 5 seconds to turn on and you might hear a start-up melody. Your hearing care provider can adjust this delay if needed.
- To turn off: Open the battery door completely.
2. Multi-function Button
The multi-function button on your hearing aid serves several purposes, depending on its programming:
- Volume Control: Adjusts the listening volume.
- Program Change: Switches between listening programs.
- Call Management: Accepts or rejects mobile phone calls when paired with a Bluetooth-enabled phone.
Program Control:
Each time you push the upper part of the button for longer than 2 seconds, you will advance to the next hearing aid program. Your hearing aids will beep to indicate the current program:
| Program Setting | Beeps |
|---|---|
| Program 1 (e.g., quiet) | ♪ 1 beep |
| Program 2 (e.g., noise) | ♪♪ 2 beeps |
| Program 3 (e.g., telephone) | ♪♪♪ 3 beeps |
| Program 4 (e.g., music) | ♪♪♪♪ 4 beeps |
Volume Control:
To adjust the volume for your environment:
- Push the upper part of the button on the hearing aid to increase the volume.
- Push the lower part of the button on the hearing aid to decrease the volume.
Your hearing aids will beep as you change the volume:
| Volume Setting | Beeps |
|---|---|
| Suggested volume level | ♪ 1 beep |
| Turning volume up | ♪ short beep |
| Turning volume down | ♪ short beep |
| Maximum volume level | ♪♪ 2 beeps |
| Minimum volume level | ♪♪ 2 beeps |
3. Bluetooth Connectivity
Initial Pairing to a Bluetooth-Enabled Device:
The pairing procedure only needs to be performed once for each new Bluetooth device. After initial pairing, your hearing aid will automatically connect to the device when switched on. The initial pairing process can take up to 2 minutes.
- On your device (e.g., a smartphone), ensure Bluetooth wireless technology is enabled and search for Bluetooth-enabled devices in the connectivity settings menu.
- Switch on both hearing aids. You have 3 minutes to pair your hearing aids with your device.
- Your device will show a list of Bluetooth-enabled devices. Select the hearing aid from the list to simultaneously pair both hearing aids. A beep confirms successful pairing.
Note: Consult your phone's user guide for specific instructions on pairing Bluetooth devices.
Connecting to a Bluetooth-Enabled Device:
After being paired, your hearing aid will automatically connect to the device when switched on, as long as the device remains ON and within range. Your hearing aid can be connected to up to two devices and paired to up to eight devices.
4. Phone Calls (Hands-Free)
Your hearing aids connect directly with Bluetooth-enabled phones, allowing for hands-free calls. You will hear notifications and the caller's voice directly in your hearing aid, and your voice will be picked up by the hearing aid microphones and transmitted back to the phone.
Making a Call:
Enter the phone number on your paired phone and press the dial button. You will hear the dialing tone through your hearing aid. Your voice will be picked up by the hearing aid microphones and transmitted to the phone.
Accepting a Call:
When an incoming call notification is heard in your hearing aid, you can accept the call by a short press (less than 2 seconds) on the upper or lower part of the multi-function button on the hearing aid, or directly on your phone.
Ending a Call:
A call can be ended by a long press (more than 2 seconds) on the upper or lower part of the multi-function button on the hearing aid, or directly on your phone.
Rejecting a Call:
An incoming call can be rejected by a long press (more than 2 seconds) on the upper or lower part of the multi-function button on the hearing aid, or directly on your phone.
5. Flight Mode
Your hearing aids operate in the frequency range of 2.4 GHz-2.48 GHz. When flying, some airlines require all devices to be switched into flight mode. Entering flight mode will disable only the Bluetooth connectivity functions, not normal hearing aid functionality.
Entering Flight Mode:
- Open the battery door.
- Hold down the lower part of the multi-function button for 7 seconds while closing the battery door.
In flight mode, your hearing aid cannot connect directly to your phone.
Exiting Flight Mode:
To re-enable Bluetooth wireless function and exit flight mode:
- Open the battery door.
- Close the battery door.
6. Using the Unitron Remote Plus App
The Unitron Remote Plus app can be used on phones with Bluetooth Low Energy (LE) capability. For phone compatibility details, visit: unitron.com/global/en_us/help-and-support/bluetooth-support/phone-compatibility.html
For app instructions, visit: unitron.com/ca/en_ca/help-and-support.html?tabltem=userguides
7. Listening in Public Places (Telecoil Function)
Telecoils pick up electromagnetic energy and convert it into sound, allowing you to hear in public places with loop systems (e.g., churches, concert halls, train stations). Look for the telecoil symbol (an ear with a 'T' inside) to identify compatible environments.

Figure 3: Full-time Acoustic Tracking System in Various Environments
How to use your telecoil function:
Access the telecoil function either by a long press of the multi-function button on your hearing aid or via the Remote Plus app. Ensure you are within the designated loop system area.
Maintenance
1. General Care
- When not using your hearing aid, leave the battery door open to allow moisture to evaporate.
- Always completely dry your hearing aid after use. Store it in a safe, dry, and clean place.
- Your hearing aids are classified as IP68, meaning they are water and dust resistant and designed for daily life situations. They can be worn in the rain but should not be fully submerged in water or used during showering, swimming, or other water activities.
- Never expose your hearing aids to chlorinated water, soap, salt water, or other liquids with chemical content.
- If the device has been stored or transported outside recommended conditions, wait 15 minutes before using it after restoring recommended environmental conditions.
- Remove your hearing aid before using hair spray or applying cosmetics, as these products can cause damage.
2. Cleaning Schedule
- Daily: Inspect the earpiece and tube for earwax and moisture. Clean surfaces with a lint-free cloth. Do not use cleaning agents (detergents, soap) or rinse with water, as moisture can get trapped.
- Weekly: Clean the earpiece with a soft, damp cloth or a special cleaning cloth for hearing aids.
- Monthly: Inspect your hearing tube for color changes, hardening, or cracks. Replace the tube if any changes are observed.
3. Exchanging the Earpiece
Check your earpiece regularly. If it appears dirty or if sound quality/volume is reduced, clean or exchange it. Domes should be exchanged every 3 months.
Removing the Earpiece/Dome from the Slim Tube:
- Hold the Slim tube in one hand and the earpiece in the other.
- Gently pull off the earpiece to remove it.
- Clean the Slim tube with a lint-free cloth.
Caution: Avoid gripping the tube when removing the hearing aid.
Attaching the Earpiece/Dome to the Slim Tube:
- Hold the Slim tube in one hand and the earpiece in the other.
- Slide the earpiece over the tip of the Slim tube until it fits perfectly.
4. Exchanging the Earwax Protection (for SlimTip)
Removing the Earwax Protector:
- Insert the removal side of the exchange tool into the used earwax protector until the shaft of the holder touches the rim.
- Carefully pull and remove the earwax protector straight out. Do not twist it.
Inserting a New Earwax Protector:
- Gently push the insertion side of the exchange tool straight into the hole of the SlimTip until the outer ring is perfectly aligned.
- Pull the tool straight out. The new earwax protector will remain in place.
Troubleshooting
- Low Battery Warning: You will hear two beeps every 30 minutes when the battery is low. You have approximately 60 minutes to change the battery. Always have a new battery on hand.
- Hearing Aid Not Turning On / Battery Door Difficult to Close: Ensure the battery is inserted correctly with the flat side facing upwards. Incorrect insertion can damage the hearing aid.
- Hearing Aid Stops Working After Water Contact: If your hearing aid stops working after contact with water, it may be due to restricted airflow to the batteries. Refer to your hearing care professional for assistance.
- No Sound or Reduced Sound Quality: Check the earpiece and tube for earwax or moisture deposits. Clean as per maintenance instructions. Ensure the battery is not low or depleted.
For any persistent issues, please consult your hearing care professional.
Specifications
General
- Style: Behind-The-Ear (BTE)
- Bluetooth: Yes
- Output Power: Up to approximately 132 dB SPL
- Origin: China Mainland
- High-concerned chemical: None
Unitron Ativo SP
- Battery Size: 13

Figure 4: Unitron Ativo SP Sound Performance Features and Experience Tech Tools

Figure 5: Unitron Ativo SP Fitting Guide with Audiogram
Unitron Ativo UP
- Battery Size: 675
- Dimensions:
- Length: 42.8 mm
- Height: 20.5 mm
- Width: 9.2 mm
- Weight: 4.74 g

Figure 6: Unitron Ativo UP Sound Performance Features and Experience Tech Tools

Figure 7: Unitron Ativo UP Fitting Guide with Audiogram
Environmental Conditions
Ensure to use, transport, and store the hearing aid according to the following conditions. Temperature and humidity shall not exceed these ranges for extended periods.
| Condition | Operating | Transport | Storage |
|---|---|---|---|
| Temperature | +5 to +40 ℃ (+41 to +104 ℉) | -20 to +60 ℃ (-4 to +140 ℉) | -20 to +60 ℃ (-4 to +140 ℉) |
| Humidity (non-condensing) | 0% to 85% | 0% to 93% | 0% to 93% |
| Atmospheric pressure | 500 to 1060 hPa | 500 to 1060 hPa | 500 to 1060 hPa |
User Tips
- Always keep spare batteries on hand, especially if you travel frequently.
- Regularly check for earwax buildup, as this is a common cause of reduced sound quality.
- If you experience any discomfort or persistent issues, do not hesitate to contact your hearing care professional.
- Familiarize yourself with the Remote Plus app for advanced control and personalization of your hearing experience.
Warranty & Support
Expected Service Life
The expected service life of your Unitron Ativo hearing aids is five years. The devices are designed to remain safe for use throughout this duration.
Commercial Service Period
Sonova AG commits to providing a minimum of a five-year repair service period after the respective hearing aid and essential components have been phased out of the manufacturer's product portfolio. Routine care and diligent maintenance will contribute to the optimal performance of your devices throughout their expected service life.
Additional Resources
- User Manual (PDF): A detailed user manual in PDF format is available for download. View User Manual (PDF)
- Phone Compatibility: For details on phone compatibility with the Unitron Remote Plus app, please visit: unitron.com/global/en_us/help-and-support/bluetooth-support/phone-compatibility.html
- Remote Plus App Instructions: For instructions on using the Unitron Remote Plus app, please visit: unitron.com/ca/en_ca/help-and-support.html?tabltem=userguides