Yeelight A30/A50

Contents

Yeelight Ultra-thin Cabinet Light A30/A50 User Manual

Smart Motion Sensor Light - Rechargeable Wireless Dimmable LED Atmosphere Light

1. Safety Regulations

  • Do not use a power adapter or other devices with an output voltage greater than DC5V to power this product.
  • Do not install the product in unstable places. The product should be placed on a smooth surface and avoid installing it on a white cement wall to prevent it from falling and causing injury.
  • Do not install the product above high-temperature objects or in humid places. Avoid installing it above stoves, gas, exhaust vents, etc., to prevent damage.
  • The product should not be connected in series with other electrical appliances and should not be used in parallel with a dimmer.
  • When inspecting or repairing the product, please entrust professional electricians. Non-professionals may cause accidents during construction.
  • In case of any abnormality in the product's operation, immediately disconnect the power and contact the seller. Please provide the corresponding product model for maintenance, referring to the display content on the product box.

2. Components and Accessories

The package includes the following items:

  • Yeelight Ultra-thin Cabinet Light (A30 or A50 model)
  • USB Type-C Power Cord
  • Double-sided Tape
  • Magnetic Adsorption Plate
  • User Manual

Refer to the image below for a visual guide to the components:

Diagram showing the components of the Yeelight cabinet light, including the function switch, Type-C port, touch dimming area, motion sensor, power cord, magnetic absorption plate, and double-sided tape.
Figure 2.1: Components and Accessories Overview

3. Setup and Installation

The Yeelight Ultra-thin Cabinet Light features a magnetic design for easy installation.

Installation Method:

  1. Stick the double-sided tape onto the magnetic adsorption plate.
  2. Peel off the backing from the double-sided tape.
  3. Attach the magnetic adsorption plate to the corresponding magnetic position on the back of the product.
  4. Stick the cabinet light onto a smooth installation surface.

Note:

  • Pay attention to align the infrared motion sensor head towards the area where human activities occur.
  • There should be no obstructions in front of the motion sensor to avoid affecting the sensing function.
Diagram showing how to install the light using the built-in magnet. For metal surfaces, directly attach. For other surfaces, stick on adhesive metal plates, then attach the light.
Figure 3.1: Magnetic Installation Guide
Image showing the ultra-thin design of the cabinet light installed invisibly under cabinets.
Figure 3.2: Concealing Installation with 0.27" ultra-thin design
Images showing the cabinet light applied in multiple scenarios: reading, night light, stairs, cooking, and car tank.
Figure 3.3: Versatile Application Scenarios

Video Guide:

Video demonstrating unboxing, installation, and various light features.

4. Operating Modes and Functions

The Yeelight Cabinet Light offers versatile lighting modes controlled by a built-in toggle switch and touch switch.

Function Description - Toggle Switch:

  • ON Mode: The product stays continuously illuminated. Brightness can be adjusted using the touch switch.
  • AUTO Mode: The product enters PIR motion sensor mode. It remains warmed up for 5 seconds and then turns off. When the ambient illuminance is between 2-15 lux, the PIR sensor detects human movement, and the product automatically turns on with a delay time of 15 seconds. If movement is detected again, the delay time will be extended. If the PIR sensor does not detect human movement or if the ambient illuminance exceeds 15 lux, the product will turn off 15 seconds after being turned on. Brightness can be adjusted via the touch switch.
  • OFF Mode: The product does not turn on, and the touch switch is disabled.

Function Description - Touch Switch:

The touch switch allows for brightness adjustment and on/off control depending on the selected mode.

  • In ON Mode:
    • Short press: To turn on/off the light.
    • Long press: For stepless dimming.
  • In AUTO Mode:
    • Short press: To cycle through 3 levels of dimming (10%/50%/100%).
    • Long press: For stepless dimming.
  • In OFF Mode: The touch switch is disabled.
Diagram showing the controls for ON mode (stepless dimming, switch on/off) and AUTO mode (stepless dimming, adjust brightness to 10%, 50%, 100%).
Figure 4.1: Versatile Modes for All
Image illustrating stepless dimming, showing a gradient from 0% to 100% brightness.
Figure 4.2: Stepless Dimming Functionality

5. Charging Instructions

  • The red indicator light is on during charging.
  • The green indicator light is on when charging is completed.
  • Low battery reminder: The main light flashes twice before turning off.
  • If the product is not used for a long time, it is recommended to charge it at least once every 20 days.

6. Specifications

FeatureSpecification
Product NameYeelight Ultra-Thin Induction Cabinet Light
Model NumberA30: YLYYD-0014, A50: YLYYD-0015
Input Voltage5V 1A
Rated PowerA30: 5W, A50: 6.5W
Light Color Temperature4000K
Battery CapacityA30: 1100mAh, A50: 1500mAh
Product SizeA30: 30x4x0.7cm, A50: 50x4x0.7cm
Wireless CommunicationNon-Remote Function
Power SourceDC
Battery IncludedYes
Inbox AdaptorNo
High-concerned chemicalNone
OriginMainland China
Image showing Ultra Long Standby Time for A30 model: 1100mAh battery, 6 months in Auto mode, 33 hours in Always On mode.
Figure 6.1: A30 Model Battery Life
Image showing Ultra Long Standby Time for A50 model: 1500mAh battery, 6 months in Auto mode, 24 hours in Always On mode.
Figure 6.2: A50 Model Battery Life

7. Maintenance and Care

  • To use this product safely and effectively, please clean and inspect it regularly (at least every six months).
  • When cleaning the product, disconnect the power supply and wipe it with a soft cloth dipped in soapy water, then dry it with a dry cloth. Do not use other reagents for cleaning, as this may cause discoloration or damage to the product.
  • Keep the surface of the transparent lampshade clean to avoid affecting the lighting effect. If dust adheres to the transparent lampshade, wipe it gently with a clean, lint-free cloth.
  • Do not use alcohol, gasoline, or other chemical agents to clean the product, as it may cause discoloration or damage.
  • Do not change the structure of the product arbitrarily. The manufacturer is not responsible for any product damage or personal injury caused by improper use or modification of the product.

8. Troubleshooting

If you experience issues with your Yeelight Cabinet Light, refer to the following common problems and solutions:

  • Sensor not detecting movement or turning off too quickly:
    • Ensure the motion sensor head is aligned towards the area of human activity.
    • Check for any obstructions in front of the motion sensor.
    • Verify ambient light conditions are within the 2-15 lux range for AUTO mode to function optimally.
    • Ensure the light is not placed too high in wardrobes, as this can reduce sensor effectiveness.
  • Light not turning on:
    • Check if the light is in OFF mode. Switch to ON or AUTO mode.
    • Ensure the battery is charged. Refer to charging instructions.
  • Charging issues:
    • Use a USB-A to USB-C charging cable. The device may not support C-to-C charging.
    • Ensure the charging cable is not damaged.

9. User Tips

  • The slim profile and strong magnetic mounting make this light ideal for discreet installation in various locations, including mini-fridges and cabinets.
  • For optimal motion sensing, ensure the sensor is not obstructed and is positioned to capture movement effectively.
  • When charging, use a USB-A to USB-C cable as C-to-C charging may not be supported.

10. Warranty and Support

  • The light source contained in this product shall only be replaced by the manufacturer, its service agent, or a similar qualified person.
  • If the external cable or wire of the product is damaged, it should be replaced with a special cable or wire provided by the manufacturer or its authorized service agent.
  • For any service or repair needs, please contact the store from which you purchased the product.

© 2024 Yeelight. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.