Important Safety Information
⚠️ Warning: If you are younger than 18, do not use this device. You should consult a doctor, preferably an ear-nose-throat doctor (an ENT), as your condition requires specialized care. Over-the-counter hearing aids are only for users who are age 18 or older.
These hearing aids are classified as IP68, meaning they are water and dust resistant and designed to withstand daily life situations. They can be worn in the rain but should not be fully submerged in water or used when taking a shower, swimming, or other water activities. Never expose hearing aids to chlorinated water, soap, salt water, or other liquids with chemical content.
Introduction
The Unitron Ativo SP/UP are advanced Behind-The-Ear (BTE) hearing instruments designed to provide clear sound for individuals with mild to severe hearing loss. These devices feature Bluetooth connectivity for seamless pairing with smartphones, app control for personalized settings, and computer programmability to match specific audiogram requirements.
This manual provides essential information on how to set up, operate, maintain, and troubleshoot your Unitron Ativo SP/UP hearing aids.
Parts Identification
Familiarize yourself with the components of your Unitron Ativo hearing aids:
Unitron Ativo hearing aids with earmold
- Earhook: Connects your custom-made earmold to the hearing aid.
- Microphone: Captures sound.
- Multi-function button: For program changes, volume control, and call management.
- Battery door (on & off): Closes to turn on, opens fully to turn off or change battery.
- Tubing: Part of the earmold that attaches to the earhook.
- Earmold: Directs sound to the ear and holds the hearing aid in place.
Unitron Ativo hearing aids with Slim tube
- Microphone: Captures sound.
- Multi-function button: For program changes, volume control, and call management.
- Battery door (on & off): Closes to turn on, opens fully to turn off or change battery.
- Slim tube: Transmits sound to the ear canal.
- Dome: Holds the slim tube in place in your ear canal.
- Retention piece: Helps prevent the dome and speaker unit from moving out of the ear canal.
Possible Earpieces
Your hearing aid may be fitted with various earpieces:
- Classic earmold
- Universal eartip
- Dome*
- Slim Tip*
*Note: Dome and Slim Tip are not compatible with Unitron Ativo UP.
Setup
1. Battery Insertion
To insert the battery into your hearing aid:
- Remove the sticker from the new battery and wait 2 minutes.
- Open the battery door.
- Place the battery in the battery door with the flat side facing upwards.
Important:
- If the battery door is difficult to close, check that the battery is inserted correctly and that the flat side is facing upwards. Incorrect insertion can damage the hearing aid.
- The flat side of the battery is marked with a "+" symbol.
- Always use the correct type of zinc-air battery. Refer to the Specifications section for battery sizes.
2. Identifying Left and Right Hearing Aids
Each hearing aid has a color marking on the back to indicate its intended ear:
- Blue marking: For the left hearing aid.
- Red marking: For the right hearing aid.
3. Putting on Your Hearing Aids
Follow these steps to correctly place your hearing aids:
For hearing aids with classic earmold:
- Take the earmold up to your ear and place the ear canal part into your ear canal.
- Place the hearing aid behind your ear.
- Insert the upper part of the earmold into the upper part of the bowl of your ear.
For hearing aids with dome, SlimTip, or universal eartip:
- Place the hearing aid behind your ear.
- Insert the earpiece into your ear canal.
- If there is an anchor attached to the earpiece, tuck it into the bowl of your ear to secure your hearing aid.
Operation
1. Turning On and Off
The battery door acts as the on/off switch:
- On: Close the battery door fully. It may take 5 seconds for the hearing aid to turn on, and you might hear a start-up melody.
- Off: Open the battery door fully.
2. Multi-function Button
The multi-function button serves several purposes, depending on your hearing aid's programming:
- Volume Control: Adjusts the listening volume.
- Program Change: Switches between listening programs.
- Call Management (Bluetooth):
- Short press: Accepts an incoming call.
- Long press: Rejects an incoming call.
Your hearing aids will beep to indicate which program you are in:
| Program Setting | Beeps |
|---|---|
| Program 1 (e.g., quiet) | ♪ 1 beep |
| Program 2 (e.g., noise) | ♪♪ 2 beeps |
| Program 3 (e.g., telephone) | ♪♪♪ 3 beeps |
| Program 4 (e.g., music) | ♪♪♪♪ 4 beeps |
3. Volume Control
To adjust the volume of your environment:
- Push the upper part of the button on the hearing aid to increase the volume.
- Push the lower part of the button on the hearing aid to decrease the volume.
Your hearing aids will beep as you change the volume:
| Volume Setting | Beeps |
|---|---|
| Suggested volume level | ♪ 1 beep |
| Turning volume up | ♪ short beep |
| Turning volume down | ♪ short beep |
| Maximum volume level | ♪♪ 2 beeps |
| Minimum volume level | ♪♪ 2 beeps |
4. Bluetooth Pairing and Connectivity
Your hearing aids connect directly with Bluetooth-enabled phones. After initial pairing, they will automatically connect when switched on.
Initial Pairing:
- On your device (e.g., phone), enable Bluetooth and search for devices in the connectivity settings.
- Switch on both hearing aids. You have 3 minutes to pair.
- Select the hearing aid from the list on your device to pair both hearing aids simultaneously. A beep confirms successful pairing.
Consult your phone's user guide for specific Bluetooth pairing instructions.
Connectivity Notes:
- The connection is maintained as long as the device is ON and within range.
- Your hearing aid can be connected to up to two devices and paired to up to eight devices.
5. Phone Calls
When paired and connected to your phone, you will hear notifications and the caller's voice directly in your hearing aid. Your voice is picked up by the hearing aid microphones and transmitted back to the phone, enabling hands-free calls.
Making a Call:
Enter the phone number and press the dial button. You will hear the dialing tone through your hearing aid.
Accepting a Call:
When an incoming call notification is heard, accept the call by a short press (less than 2 seconds) on the upper or lower part of the multi-function button, or directly on your phone.
Ending a Call:
End a call by a long press (more than 2 seconds) on the upper or lower part of the multi-function button, or directly on your phone.
Rejecting a Call:
Reject an incoming call by a long press (more than 2 seconds) on the upper or lower part of the multi-function button, or directly on your phone.
6. Flight Mode
Your hearing aids operate in the frequency range of 2.4 GHz-2.48 GHz. When flying, some airlines require devices to be switched into flight mode. This disables Bluetooth connectivity functions but does not affect normal hearing aid functionality.
Entering Flight Mode:
To disable Bluetooth and enter flight mode:
- Open the battery door.
- Hold down the lower part of the multi-function button for 7 seconds while closing the battery door.
Exiting Flight Mode:
To enable Bluetooth and exit flight mode:
- Open the battery door.
- Close the battery door again.
7. Telecoil Function (Listening in Public Places)
Your hearing aid may have a telecoil option to help you hear in public places with loop systems (e.g., churches, concert halls, train stations). When you see the telecoil symbol (a stylized ear with a 'T'), a loop system is present and compatible with your hearing aids.
To use the telecoil function:
- Direct Access: A long press of the multi-function button can activate the telecoil program (if configured by your hearing care professional).
- Remote Plus App: Access the telecoil program via the Unitron Remote Plus app.
Ensure you are within the designated loop system area.
8. Unitron Remote Plus App Control
The Unitron Remote Plus app allows customizable control of your hearing aids. It is compatible with phones that have Bluetooth Low Energy (LE) capability.
For phone compatibility details, visit: unitron.com/global/en_us/help-and-support/bluetooth-support/phone-compatibility.html
To install the app:
- iPhone users: Scan the QR code for iPhone app.
- Android OS users: Scan the QR code for Android app.
Care and Maintenance
Proper care ensures optimal performance and longevity of your hearing aids.
General Information
- When not using your hearing aid, leave the battery door open to allow moisture to evaporate. Always dry your hearing aid completely after use.
- Store your hearing aid in a safe, dry, and clean place.
- Remove your hearing aid before using hair spray or applying cosmetics, as these products may damage it.
- If the device has been stored or transported outside recommended environmental conditions, wait 15 minutes before starting it after conditions are restored.
Cleaning Schedule
- Daily: Inspect the earpiece and tube for earwax and moisture. Clean surfaces with a lint-free cloth. Do not use cleaning agents like household detergents or soap, and avoid rinsing with water.
- Weekly: Clean the earpiece with a soft, damp cloth or a special cleaning cloth for hearing aids.
- Monthly: Inspect the hearing tube for color changes, hardening, or cracks. Replace the hearing tube if any changes are observed.
Exchanging the Earpiece
Regularly check and exchange or clean your earpiece if it appears dirty or if hearing aid volume/sound quality is reduced.
- If a dome is used, it should be exchanged every 3 months.
Removing the earpiece or dome from the Slim tube:
- Hold the Slim tube in one hand and the earpiece in the other.
- Gently pull off the earpiece to remove.
- Clean the Slim tube with a lint-free cloth.
Attaching the earpiece or dome to the Slim tube:
- Hold the Slim tube in one hand and the earpiece in the other.
- Slide the earpiece over the tip of the Slim tube.
- Ensure the Slim tube and earpiece fit perfectly together.
Exchanging the Earwax Protection of your SlimTip
To maintain sound quality, regularly exchange the earwax protection:
- Insert the removal side of the exchange tool into the used earwax protector. The shaft of the holder should touch the rim of the earwax protector.
- Carefully pull and remove the earwax protector straight out. Do not twist.
- To insert the new earwax protector, gently push the insertion side of the exchange tool straight into the hole of the SlimTip until the outer ring is perfectly aligned.
- Pull the tool straight out. The new earwax protector will remain in place.
Troubleshooting
If you experience issues with your Unitron Ativo SP/UP hearing aids, consider the following common solutions:
- No Sound/Weak Sound:
- Check if the battery is inserted correctly and is not depleted. Replace if necessary.
- Ensure the battery door is fully closed to turn the device on.
- Inspect the earpiece and tube for earwax blockages. Clean or replace as needed.
- Verify that the hearing aid is not in flight mode if Bluetooth functions are desired.
- Poor Sound Quality/Feedback:
- Ensure the earpiece is correctly seated in your ear canal.
- Check for earwax buildup in the earpiece or earwax protection.
- If using a dome, ensure it is not damaged and is replaced every 3 months.
- Bluetooth Connectivity Issues:
- Ensure Bluetooth is enabled on your phone and the hearing aids are within range.
- Re-pair the hearing aids with your device if connection is lost.
- Check if the hearing aids are in flight mode.
- Low Battery Warning: You will hear two beeps every 30 minutes when the battery is low. You have approximately 60 minutes to change the battery.
For more detailed troubleshooting, please refer to the full user manual (PDF) or contact your hearing care professional.
Specifications
General Product Information
- Origin: China Mainland
- High-concerned chemical: None
- Style: Behind-The-Ear (BTE)
- Bluetooth: Yes
- App Control: Unitron Remote Plus App
- Computer Programmable: Yes (according to audiogram)
- Output Power: Up to 132 dB SPL
- Features: Feedback cancellation, noise reduction, directional microphone, multi-function buttons.
Battery Information
| Model | Zinc-air battery size | Color marking on package | IEC code | ANSI code |
|---|---|---|---|---|
| Unitron Ativo BTE-UP | 675 | blue | PR44 | 7003ZD |
| Unitron Ativo BTE-SP | 13 | orange | PR48 | 7000ZD |
| Unitron Ativo BTE-M | 312 | brown | PR41 | 7002ZD |
Physical Dimensions (Unitron Ativo UP)
- Length: 42.8 mm
- Height: 20.5 mm
- Width: 9.2 mm
- Weight: 4.74 g
Sound Performance Features (Unitron Ativo SP)
| Feature | Details |
|---|---|
| AutoMic | • |
| Total streaming programs | 2 |
| Media speech | • |
| Media music | • |
| Pinna Effect | • |
| Speech enhancement | • |
| Noise reduction | • |
| Manual programs | 4 |
| Made For All direct connectivity | • |
| Telecoil | • |
| Fine-tuning channels | 12 |
Sound stabilization: AntiShock 2, Feedback manager
Microphone options: Adaptive directional, Fixed directional, Fixed wide directional, Omni directional
Ease and convenience: Remote Plus app, TV Connector, Remote Control, PartnerMic, DuoLink
Fitting: Automatic Adaptation Manager, Frequency compression 2, IntelliVent
Experience Tech Tools: First Fit, Ratings, Coach, Remote Adjust, Success Check
Personalization: Equalizer
Sound Performance Features (Unitron Ativo UP)
| Feature | Details |
|---|---|
| AutoMic | • |
| Total streaming programs | 2 |
| Media speech | • |
| Media music | • |
| Pinna Effect | • |
| Speech enhancement | • |
| Noise reduction | • |
| Manual programs | 4 |
| Made For All direct connectivity | • |
| Telecoil | • |
| Fine-tuning channels | 12 |
Sound stabilization: AntiShock 2, Feedback manager
Microphone options: Adaptive directional, Fixed directional, Fixed wide directional, Omni directional
Ease and convenience: Remote Plus app, TV Connector, Remote Control, PartnerMic, DuoLink
Fitting: Automatic Adaptation Manager, Frequency compression 2, IntelliVent
Experience Tech Tools: First Fit, Ratings, Coach, Remote Adjust, Success Check
Personalization: Equalizer
Fitting Guides
The fitting guides below illustrate the typical hearing loss ranges addressed by the Unitron Ativo SP and UP models.
Environmental Conditions
The hearing aids are designed to function optimally under the following conditions:
| Condition | Operating | Transport | Storage |
|---|---|---|---|
| Temperature | +5 to +40 °C (+41 to +104 °F) | -20 to +60 °C (-4 to +140 °F) | -20 to +60 °C (-4 to +140 °F) |
| Humidity (non-condensing) | 0% to 85% | 0% to 93% | 0% to 93% |
| Atmospheric pressure | 500 to 1060 hPa | 500 to 1060 hPa | 500 to 1060 hPa |
Temperature and humidity should not exceed these ranges for extended periods during transport and storage.
User Tips
- Customization: The seller offers to customize the hearing aids to your specific hearing loss if you provide your most recent hearing test/audiogram before shipping. This can help ensure optimal performance right out of the box.
- Rechargeable?: The provided information indicates these models use zinc-air batteries (sizes 13, 312, 675), suggesting they are not rechargeable. Always have spare batteries on hand.
Warranty and Support
The expected service life of these hearing aids is five years. Routine care will contribute to their outstanding performance throughout this period.
Sonova AG provides a minimum five-year repair service period after the hearing aid and essential components are phased out of their product portfolio.
For further information on product safety, please refer to chapter 22 of the comprehensive user manual.
A detailed user manual in PDF format is available for download: Download User Manual (PDF).
If you require an English manual or product information, please contact customer service for assistance.