1. Introduction
Thank you for choosing OPPSHINE T10 LED Park Lights. These high-quality LED bulbs are designed to provide superior illumination for various automotive applications, including parking lights, side door bulbs, and license plate lights. This manual provides essential information for safe installation, operation, and maintenance of your new LED lights.

Image 1: OPPSHINE T10 LED Park Lights showcasing multiple bulbs and available light colors.
2. Safety Information
Please read all safety instructions carefully before installation and use.
- Electrical Safety: Always ensure the vehicle's power is turned off and the ignition is switched off before attempting any installation or maintenance. This prevents electrical shock and damage to the vehicle's electrical system.
- Handling: Handle LED bulbs by their base to avoid touching the LED chips directly, which can transfer oils and reduce lifespan.
- Compatibility: Ensure the voltage (12V) and bulb type (T10/W5W/194/168) are compatible with your vehicle's specifications.
- Children: Keep the product out of reach of children to prevent accidental ingestion of small parts or injury.
- Cleaning: Do not use harsh chemicals, abrasive cleaners, or strong acid/alkaline solutions to clean the bulbs, as this can damage the PC material or LED components.
3. Package Contents
Your package should contain the following items:
- 10 x OPPSHINE T10 LED Park Lights
Please inspect the contents upon receipt and contact your seller if any items are missing or damaged.
4. Specifications

Image 2: T10 LED bulb dimensions and electrical specifications.
| Feature | Specification |
|---|---|
| Model Type | T10 / W5W / 194 / 168 |
| Dimensions (L x W) | 25mm x 9mm (base) / 11mm (bulb width) |
| Voltage | DC 12V |
| Power | 1.2W - 1.8W (varies slightly by specific chip configuration) |
| Current | 0.1A - 0.15A |
| Luminous Flux | 249-2000 Lumens |
| LED Chip Type | 8PCS 5730 SMD LED Chips |
| Beam Angle | 360° Surround Glow |
| Material | PC (Polycarbonate) and Aviation Aluminum |
| Lifespan | ≥60,000 Hours |
| Operating Temperature | -40°C to +80°C |
| Waterproof Rating | IP65 |
| Certifications | CCC, CE |

Image 3: IP65 Waterproof rating of the T10 LED bulb.

Image 4: High brightness and 360-degree glow provided by 5730 SMD LED chips.

Image 5: Advanced cooling design for extended lifespan and stable performance.
5. Installation (Setup)
These T10 LED bulbs are designed for a 1:1 replacement of traditional halogen bulbs, making installation straightforward.

Image 6: Visual comparison of LED vs. Halogen lighting and common application areas.

Image 7: Examples of where T10 LED bulbs can be used in a vehicle.
- Safety First: Ensure your vehicle's engine is off and the ignition is turned off. Disconnect the negative terminal of your car battery if you are uncomfortable working with live electrical components.
- Locate the Bulb: Identify the existing T10/W5W bulb you wish to replace (e.g., parking light, license plate light, interior dome light).
- Remove Old Bulb: Carefully twist or pull out the old halogen bulb from its socket.
- Insert LED Bulb: Insert the new OPPSHINE T10 LED bulb into the socket. Ensure it is seated firmly.
- Test Functionality: Turn on your vehicle's ignition and activate the light circuit (e.g., turn on parking lights). If the LED bulb does not light up, remove it, rotate it 180 degrees, and reinsert it. LEDs are polarity sensitive and may need to be oriented correctly.
- Secure: Once confirmed working, ensure the bulb and socket are securely in place.
6. Operating Instructions
OPPSHINE T10 LED Park Lights operate like standard automotive bulbs. Once installed, they will illuminate when the corresponding vehicle light circuit is activated (e.g., when parking lights are turned on, or when a door is opened for interior lights).

Image 8: T10 LED bulbs providing vibrant illumination in different colors for rear vehicle lights.
7. Maintenance
These LED bulbs are designed for long-lasting performance with minimal maintenance.
- Cleaning: If the bulb surface becomes dirty, gently wipe it with a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water. Do not use chemical solvents, abrasive cleaners, or strong acid/alkaline solutions.
- Inspection: Periodically check the bulbs for any signs of damage or loose connections.
- Replacement: Due to their long lifespan, frequent replacement is not expected. If a bulb fails, replace it following the installation steps.
8. Troubleshooting
- Bulb Does Not Light Up:
- Check the polarity: Remove the bulb, rotate it 180 degrees, and reinsert it.
- Ensure the bulb is fully seated in the socket.
- Verify the vehicle's light circuit is active and receiving power.
- Check for a blown fuse in the vehicle's fuse box related to the light circuit.
- Bulb Flickers:
- Ensure the connection in the socket is secure and clean.
- Verify the vehicle's voltage is stable (12V).
- Error Message on Dashboard (CANBUS systems):
- While these bulbs are designed with CANBUS compatibility, some sensitive vehicle systems may still trigger a bulb-out warning. In such rare cases, an additional load resistor may be required (not included).
9. User Tips
- Verify Color: Upon receiving your order, quickly verify that the color of the LED bulbs matches your selection before installation.
- Gentle Installation: When inserting the bulbs, apply gentle, even pressure to avoid damaging the bulb or the vehicle's socket.
10. Warranty and Support
OPPSHINE stands behind the quality of its products. For any issues, questions, or support needs, please contact your original point of purchase or the seller directly. Please have your order details ready when contacting support.