User Manual: MAOZUA 30.45V 1.1A Power Adapter

1. Introduction

This MAOZUA 30.45V 1.1A Power Adapter is designed as a reliable and efficient replacement charger for specific Dyson cordless vacuum cleaner models. It provides fast, safe, and stable charging to restore the full functionality of your vacuum cleaner. This manual provides essential information for the safe operation, setup, and maintenance of your new charger.

2. Safety Warnings

⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.

• Only use the charger intended for your battery.
• Do not charge damaged batteries or batteries with visible defects.
• Do not overcharge the battery as this will shorten its lifespan and may cause damage.
• Do not leave the battery unattended while charging.
• Charge the battery in a well-ventilated area to avoid overheating.
• If you notice any unusual noises or smells, stop charging immediately and unplug the charger.

3. Product Overview

The MAOZUA 30.45V 1.1A Power Adapter features an advanced design for uniform power transfer and multiple protection systems. It is constructed with flame-retardant materials and high-conductivity copper components for superior energy efficiency.

3.1 Components

• 1 x 30.45V 1.1A Power Adapter (Grey)
• Integrated 1.8m (6-foot) power cord with compatible connector

4. Specifications

5. Compatibility

5.1 Compatible Models

This charger is specifically designed for the following Dyson cordless vacuum cleaner models:

• Dyson V10 Series
• Dyson V11 Series
• Dyson V12 Series
• Dyson V15 Series
• Dyson SV12
• Dyson SV14
• Dyson SV15
• Dyson SV16
• Dyson SV20
• Dyson SV22

It is a perfect replacement for Dyson adapters with references: 217160-02, 217160-03, 368340-01, 368678-01, 369366-01, 969042-01, 969350-02, 969350-03, and 969350-05.

5.2 Incompatible Models

This charger is NOT compatible with the following Dyson models or charger types:

• Dyson V6, V7, V8 (26.1V models)
• Dyson DC30, DC31, DC34, DC35, DC44, DC45, DC56, DC57 (24.35V models)
• Dyson SV03, SV04, SV05, SV06, SV07, SV09
• Original Dyson wall load brackets (ensure the charger fits your specific dock if used)
• Chargers with 7.4mm*5.0mm or 5.5mm*2.5mm connection ports. This charger uses a 4.8mm*1.7mm connector.

6. Setup Instructions

6.1 Preparation

1. Ensure the charger is compatible with the voltage and technical data (amperes, capacity) of your Dyson vacuum cleaner battery.
2. Make sure the battery is dry and clean to avoid damage or malfunction.

6.2 Connection

1. First, connect the charger's output plug (4.8mm*1.7mm) securely to the charging port of your Dyson vacuum cleaner. Ensure the connection and polarity (+/-) are correct.
2. Only then, connect the charger's power plug (EU or US, depending on your model) to a suitable wall socket to avoid any short circuits.

7. Operating Instructions (Charging Process)

1. Once connected, the charger will automatically begin the charging process.
2. Charging typically takes 4 to 10 hours, depending on the battery's capacity (e.g., 2-5 Ah) and the charging current (usually 2.0 amps).
3. The charger's indicator light will change color or show a full indicator when the battery is fully charged.
4. Avoid stopping the charging process before the battery is fully charged.

7.1 Video Guide: Unboxing and Usage

8. Maintenance and Storage

8.1 After Charging

1. Disconnect the charger from the wall outlet first.
2. Then, disconnect the charger from the vacuum cleaner battery.

8.2 Storage

• Store the battery at room temperature.
• Avoid direct sunlight or extreme temperatures.
• Ideally, use the battery after charging or store it at around 40-60% charge to prolong its life.

9. Troubleshooting

• Charger not working / Not charging:
  • Ensure the charger is fully plugged into both the wall outlet and the vacuum cleaner.
  • Verify that the charger is compatible with your specific Dyson model (refer to Section 5).
  • Check the connection port size (must be 4.8mm*1.7mm).
  • Inspect the charger cable and connector for any visible damage.
  • If the battery is severely depleted or damaged, it may not accept a charge.
• Unusual heating, noises, or smells during charging:
  • Immediately unplug the charger from both the wall and the vacuum cleaner.
  • Do not continue to use the charger or battery if these symptoms persist. Contact support if necessary.
• Plug does not fit the wall socket:
  • This charger comes with either an EU or US plug. Ensure you have the correct version for your region. An adapter may be required for other regions.

10. User Tips

• Many users confirm this charger works perfectly with Dyson V10 and V15 models.
• The charger can fully charge a compatible Dyson vacuum from 0% to 100% in approximately 2 hours.
• If you use a wall charging dock, ensure the charger's plug fits correctly into the dock's receptacle.
• This charger is a cost-effective replacement for original Dyson adapters.

11. Frequently Asked Questions (FAQ)

Q: Is this charger compatible with my Dyson V10?

A: Yes, this charger is compatible with the Dyson V10 series, as well as V11, V12, V15, SV12, SV14, SV15, SV16, SV20, and SV22 models.

Q: I have an 'Akitas V10' vacuum cleaner. Will this charger work?

A: This charger is specifically designed for Dyson brand vacuum cleaners. If 'Akitas V10' is a different brand, compatibility cannot be guaranteed. Please verify the voltage, current, and connector type of your 'Akitas V10' against the specifications provided in this manual.

12. Additional Resources

For more detailed information or specific instructions related to your Dyson vacuum cleaner's battery, please refer to the original manufacturer's manual for your device.

A general user manual in PDF format can be referenced here: User manual (PDF)