1. Introduction
Thank you for purchasing the Trimui Smart Pro S Handheld Game Console. This device is designed to provide an immersive retro gaming experience with its powerful hardware, open-source Linux system, and vibrant IPS screen. This manual will guide you through the setup, operation, and maintenance of your new console.
Video: Trimui Smart Pro S Product Overview
Image: Trimui Smart Pro S available in multiple colors.
2. Setup
2.1 Unboxing and Package Contents
Carefully unpack your Trimui Smart Pro S console. The package should contain the following items:
- Console x1
- Charging Cable x1 (USB Type-A to Type-C)
- User Manual x1 (this document and a physical copy)
- Giftbox x1
Image: Package Contents
2.2 Initial Charging
Before first use, it is recommended to fully charge your console. Use the provided USB Type-C charging cable and a 5V/2A charger (not included, but recommended) to charge the device. The middle LOGO will indicate charging status.
- Connect the USB Type-C cable to the bottom Type-C port on the console.
- Connect the other end of the cable to a compatible 5V/2A USB power adapter.
- The middle LOGO will light up to indicate charging.
- A full charge typically takes approximately 6 hours.
Image: Battery and Charging Details
2.3 Power On/Off
- To Power On: Press and hold the Power button (located on the top edge) until the screen lights up.
- To Power Off: Press and hold the Power button until the power-off options appear on the screen, then select 'Shutdown'. Alternatively, press and hold the power button until the light goes out for a hard shutdown.
3. Operating Instructions
3.1 Basic Controls
The Trimui Smart Pro S features a standard set of controls for gaming and navigation:
- DPAD: Up, Down, Left, Right directional input.
- A/B/X/Y Buttons: Action buttons for in-game commands.
- Select/Start/Menu/Home Buttons: System and game control functions.
- L1/L2/R1/R2: Shoulder and trigger buttons for advanced controls.
- L3/R3 (Joystick Press): Pressing the TMR Dual Hall joysticks.
- TMR Dual Hall Joysticks: For precise analog control, supporting pressing (L3/R3).
- Power/Volume-/Volume+/Custom FN DIP switch: Additional function keys.
Image: Larger Trigger for Better Control
Image: TMR Joystick with Press Support
3.2 System Navigation (Trimui UI)
The console runs on an open-source Linux system with a custom Trimui UI. Navigate through menus and select games using the DPAD and A/B/X/Y buttons. The 4.96-inch IPS screen provides a clear display with 1280x720 resolution.
Image: Open Source Linux System
3.3 Game Playback
The Trimui Smart Pro S supports over 30 emulators and is compatible with a wide range of retro game formats. You can also download games in relevant formats to expand your library.
- Supported Emulators: FC, GB, GBC, PS, SFC, G.B.A, MD, NGP, MS, PCE, NEO-GEO, WSC, MAME2003PLUS, MAME4ALL, MAME2010, PGM, CPS-1, CPS-2, CPS-3, N64, DC, ARCADE, PICO8, GW, and more.
- Games can be stored on the internal 8GB eMMC or on an expandable TF card (up to 1TB).
Image: Supported Emulators
3.4 Language Settings
The console supports multiple languages, including Simplified Chinese, Traditional Chinese, English, Spanish, Japanese, Portuguese, Korean, French, Italian, German, and Russian. You can change the system language through the settings menu in the Trimui UI.
4. Maintenance
4.1 Charging Guidelines
To ensure optimal battery life and performance, follow these charging guidelines:
- Always use a 5V/2A charger for best results.
- If the machine has not been charged for a long time, or an incompatible charger is used, you might encounter charging issues.
- If the battery level remains at 0% despite charging, or does not increase, or the charging light does not light up/flickers:
- Shut down the console (press and hold the power button until the light goes out).
- Charge for more than 1-2 hours using a 5V/1A charger (or the recommended 5V/2A).
Image: Charging Instructions and Operation Suggestions
4.2 Storage and Data Management
- The console has 8GB eMMC built-in storage.
- External storage can be expanded up to 1TB using a TF card.
- The USB port supports FAT32 format for USB flash drives.
- Regularly back up important game saves and data to prevent loss.
4.3 Cleaning
To keep your console in good condition:
- Use a soft, dry cloth to wipe the screen and body.
- Avoid using harsh chemicals or abrasive materials.
- Keep the device away from dust and moisture.
5. Troubleshooting
5.1 Common Issues and Solutions
- Console not turning on: Ensure the device is fully charged. If it has been uncharged for a long time, follow the charging instructions in section 4.1.
- Games not loading/performing well: Ensure the game file is compatible with the installed emulators. Check if the game requires specific settings or a more powerful system. The console features an Allwinner A523 Octa-core Processor and Arm Mali-G57 MC1 GPU for enhanced performance.
- Overheating: The console is equipped with an active cooling system. Ensure the air vents (intake and exhaust) on the back of the device are not obstructed.
- Screen issues: The 4.96-inch IPS screen is fully laminated for clarity. If you experience display problems, try restarting the console.
Image: Active Cooling System
6. Specifications
Image: Overview of Specifications
| Feature | Description |
|---|---|
| Model | TG5050 |
| Color Options | Black, White, Gray, Red, Yellow, Green |
| CPU | Allwinner A523 Octa-core Processor @ 2.0GHz |
| GPU | Arm Mali-G57 MC1 @ 744MHz |
| DRAM | 1GB LPDDR4 |
| Built-in Storage | 8GB eMMC |
| Expandable Storage | TF card up to 1TB; USB port supports FAT32 USB flash drives |
| Display | 4.96 inch, 1280x720 pixel, IPS, fully laminated |
| Wireless | WLAN 802.11 a/b/g/n/ac/ax (2.4GHz/5GHz) |
| Bluetooth | BT 5.4 |
| Speaker | Built-in stereo speakers (1W x 2) |
| Earphone Jack | 3.5mm headphone jack |
| Microphone | Built-in mono microphone |
| Battery | 5000 mAh Li-polymer battery, 3.7V, with 6 hours battery life |
| Charging | USB Type-C interface, 5V/2A charging, data transfer limited to 500mA |
| LED Indicators | Middle LOGO charging indicator light |
| Ambient LED | RGB dual Joystick ambient light |
| Joystick Type | TMR Dual Hall joystick |
| System OS | Linux (Open Source) |
| System UI | Trimui UI |
| Material | ABS plastic + glass + electronic components |
| Product Dimensions | Width: 187.4 mm (7.38 inch), Height: 79.8 mm (3.14 inch), Depth: 17.2 mm (0.68 inch) |
| Net Weight | 256 g |
| Games Type | Handheld Game Players |
| Recommended Age | 6+ |
| Battery Included | Yes |
| Hall Effect | Yes |
| Origin | Mainland China |
| Certification | CE |
7. User Tips
- For optimal battery longevity, avoid completely draining the battery frequently.
- Utilize the console's 'Optimized True Standby' feature to conserve battery during breaks in gameplay.
- Experiment with different emulators and game settings to find the best performance for your favorite titles.
- Keep the firmware updated to ensure compatibility and access to the latest features.
8. Warranty and Support
For detailed warranty information and further technical support, please refer to the official user manual PDF available online or contact your retailer.
A comprehensive user manual is available in PDF format for additional guidance: View User Manual (PDF)