CCXTMT Motorcycle CNC Folding Aluminum Gear Shift Lever

Contents

Motorcycle CNC Folding Aluminum Gear Shift Lever User Manual

Brand: CCXTMT

1. Product Overview

This gear shift lever is part of a series of motorcycle modification parts developed by CCXTMT, a professional manufacturer of motorcycle accessories. Designed for users seeking to replace original factory parts, upgrade performance, and enhance riding comfort, this product is precision-manufactured using high-strength and wear-resistant 6061-T6 aluminum. It features a forged lever arm and an anodized CNC aluminum folding tip, offering a lightweight, high-strength, and durable solution. This gear shift lever is a direct OEM replacement and upgrade, suitable for various riding scenarios including daily commuting and light competition.

CCXTMT Motorcycle CNC Folding Aluminum Gear Shift Lever
Figure 1: CCXTMT Motorcycle CNC Folding Aluminum Gear Shift Lever. Compatible with ZongShen BSE Apollo, Kayo T2, T4, T4L, 110cc, 125cc, 150cc, 200cc, 250cc Universal models.

2. Specifications

2.1 General Specifications

  • Material: 6061-T6 Aluminum
  • Design: Forged lever arm with CNC-machined folding tip
  • Tip Feature: Knurled design for no-slip shifting
  • Installation: Direct OEM replacement and upgrade
  • Origin: Mainland China

2.2 Dimensions

Dimensional drawing of the gear shift lever
Figure 2: Gear Shift Lever Dimensions. Length: 113mm, Height: 55mm, Shaft Diameter: 11mm.

2.3 Available Colors

The gear shift lever is available in multiple colors to match your motorcycle's aesthetic.

Various colors of the gear shift lever
Figure 3: Available Colors (Red, Blue, Orange, Yellow, Green, Silver, Black).

3. Setup and Installation

  1. Compatibility Check: Before installation, carefully check that the CCXTMT gear shift lever model is compatible with your motorcycle model. Confirm that the part is free of damage or deformation, and that any accompanying accessories (if applicable) are complete.
  2. Professional Installation: Installation should ideally be performed by professional personnel with motorcycle maintenance experience or at a professional repair shop. Follow original factory part disassembly specifications to remove the old gear shift lever to avoid damaging the vehicle or the new part.
  3. Tool Usage: Use appropriately sized sockets, wrenches, and other tools for installation.
  4. Tightening Torque: Ensure that the bolt tightening torque meets the manufacturer's requirements (refer to your motorcycle's service manual for specific torque values) to prevent part damage caused by loosening or over-tightening. After replacement, the connection strength must not be lower than the original factory standard.
  5. Final Inspection: After installation, fully inspect all connection points for tightness and check for any interference between the new gear shift lever and other vehicle components. Ensure there are no potential safety hazards and that the normal functionality of other vehicle systems is not affected.

Note: Instruction of installation is NOT included with the product. Consult a professional if unsure.

4. Operating Instructions

The CCXTMT CNC Folding Aluminum Gear Shift Lever functions identically to your motorcycle's original gear shift lever. Operate it as you normally would to change gears. The knurled tip is designed to provide a secure grip for no-slip shifting.

After installation, it is recommended to conduct a short test ride in a safe area to ensure proper function and feel before regular use. Pay attention to the responsiveness and smoothness of gear changes.

5. Maintenance

  1. Break-in Period: After replacing the original gear shift lever with the new CCXTMT part, it is recommended to conduct a 500km break-in ride. During this period, avoid aggressive driving behaviors such as sudden acceleration or prolonged high-speed driving to allow full adaptation between the new part and the vehicle.
  2. Regular Inspection: Regularly inspect the connection points of the gear shift lever. Tighten any loose bolts in a timely manner.
  3. Cleaning: Clean the gear shift lever regularly with mild soap and water. Avoid using corrosive cleaning agents, strong acids, or alkalis, as these can damage the aluminum finish. Wipe surface stains gently with a damp cloth.
  4. Protection: Avoid prolonged exposure to direct sunlight to prevent potential fading of the anodized finish over time.
  5. Avoid Damage: During daily riding, avoid collisions or scratching the gear shift lever to keep it intact and maintain its performance and appearance.

6. Troubleshooting

If any abnormality is found in the CCXTMT gear shift lever during use (e.g., abnormal noise, looseness, difficulty in shifting, or failure to meet the expected effect), immediately stop riding. Inspect the lever and its mounting points for any visible issues. If the cause of the fault cannot be identified or resolved, contact a professional mechanic for assistance before continuing to use the motorcycle.

7. User Tips

  • Ensure all bolts are securely tightened after installation to prevent any play during riding.
  • Regularly check the folding tip for smooth operation and ensure it's free from debris.
  • Choose a color that complements your motorcycle for a personalized look.

8. Safety Warnings

  1. Legal Compliance: This CCXTMT modification part is intended for legal and compliant replacement of corresponding original factory motorcycle parts. Ensure all modifications comply with local traffic regulations and do not exceed the scope permitted by law. Non-compliance may result in penalties and affect vehicle annual inspection.
  2. Adaptation Period: After replacing original factory parts with modification parts, the vehicle's performance and handling feel may be optimized. Riders need to gradually adapt to the new feel to avoid safety accidents caused by unfamiliarity. Drunk driving, speeding, and other dangerous behaviors are strictly prohibited.
  3. No Unauthorized Modification: Do not arbitrarily modify or disassemble CCXTMT modification parts a second time. This may cause part damage, performance failure, potential safety hazards, and loss of brand warranty service.
  4. Interference Check: Ensure the gear shift lever does not interfere with any other controls or parts of the motorcycle, especially during full steering lock or braking.
  5. Abnormality: If any abnormality is found in the CCXTMT gear shift lever during use, immediately stop riding, inspect, and eliminate the fault cause before continuing to use.

9. Warranty and Support

If a CCXTMT modification part has quality issues, do not disassemble or repair it yourself. Contact the purchasing merchant or CCXTMT after-sales service in a timely manner. You can enjoy the brand's independent warranty service with the purchase certificate (refer to the product warranty card for specific warranty period) to ensure post-replacement usage guarantee.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.