Introduction
Thank you for purchasing the TAONUANSHU Japanese Wabisabi Minimal LED Pendant Light. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.
For a complete set of item guides and documents, please refer to the official User Manual (PDF).
Important Safety Warnings
- Always turn off the power supply at the main circuit breaker before beginning any installation, cleaning, or maintenance.
- Installation should be performed by a qualified electrician or a person with sufficient knowledge of electrical wiring.
- Do not exceed the specified voltage range (rated voltage AC90-260V). Prolonged use above the rated voltage range may lead to overheating and damage to the luminaire.
- Ensure that the local voltage is consistent with the rated voltage of the lamp.
- Do not install the lamp above high-temperature objects, such as furnaces or gas appliances, which may cause damage to the lamp.
- Do not use a dimmer in parallel with this light to avoid faults, as the product is not dimmable.
- Check that the cable and plug are intact before use.
Package Contents
Please check that all components are present and undamaged before installation.
- Pendant Light Fixture (Resin Caps)
- Mounting Hardware (screws, wiring caps)
- Adjustable Cable (up to 150cm)
- LED Bulb (E27, 12W) - included
- Driver
- Instruction Manual (this document)
Setup and Installation
Please read the assembly drawing carefully before installing and repairing the lamps. Store it properly after use for future use.
- Tighten the first section (12mm diameter, 500mm length).
- Tighten the second/third section (12mm diameter, 300mm/200mm length).
- Tighten the top plate and boom with screws.
- Tighten the main rods (25mm diameter, 500mm length).
- Insert the main rod and tighten it with a hex wrench.
- Wiring:
- The brown wire on the driver connects to the live wire of the power supply.
- The blue wire on the driver connects to the neutral wire of the power supply.
- The red wire connects to the transparent wire with words on the light pole.
- The black wire connects to the transparent wire without words.
- The white round glue is a luminous body, wrapped around the main rod. The end is inserted into the main rod and can be tightened with screws.
Operating Instructions
Once properly installed and connected to the power supply, the pendant light can be operated using a standard wall switch (Knob switch type). This fixture is designed for simple on/off functionality.
- Light Source: The fixture uses LED bulbs with an E27 base. A 12W LED E27 bulb is included.
- Color Temperature Options: Depending on the model purchased, the light may offer Warm White (3000K), Natural Light (4500K), Cold White (6000K), or a "3 Color Lights" option which allows switching between these temperatures.
- Dimmability: This pendant light is NOT dimmable. Do not connect it to a dimmer switch.
Maintenance and Care
- Cleaning: Please clean and check the lamp regularly. Always disconnect the power supply before cleaning. Wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Bulb Replacement: Ensure the power is off before replacing the E27 LED bulb. Allow the bulb to cool completely before handling.
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand Name | TAONUANSHU |
| Model Number | T-A-001 |
| Item Type | Pendant Lights |
| Installation Type | Cord Pendant |
| Style | Modern Style |
| Material | Resin |
| Finish | Iron, Plated |
| Light Source | LED bulbs |
| Base Type | E27 |
| Is Bulbs Included | Yes |
| Number of Light Sources | 1 |
| Voltage | 90 - 260 V (AC) |
| Luminous Flux | 249-2000 lumens |
| Lighting Area | 5-10 square meters |
| Is Dimmable | No |
| Switch Type | Knob switch |
| Lampshade Color Options | WHITE, GRAY |
| Place of Use | Bathroom, Other, Parlor, Restaurant, Study, Master Bedroom, Exhibition Hall, other bedrooms, Corridor, Kitchen, Hotel Hall, Hotel Room, Balcony |
| Warranty | 2 years |
| Certification | CCC, ce, CQC, EMC, pse, ROHS, VDE, EAC |
| Package Weight | 15.0 kg |
| Package Dimensions | 60cm (Length) x 60cm (Width) x 60cm (Height) |
User Tips
- Quality Assurance: Users have noted consistent good quality across various lighting fixtures from this brand.
- Secure Packaging: The product is typically well-packaged to prevent transit damage.
- Aesthetic Integration: The Wabisabi minimalist design makes this pendant light suitable for a variety of modern and traditional interior styles, enhancing the ambiance of dining rooms, living rooms, and bedrooms.
Warranty and Support
This product comes with a 2-year warranty from the date of purchase, covering manufacturing defects and material flaws under normal use.
For further assistance, troubleshooting, or warranty claims, please contact the seller or refer to the comprehensive User Manual (PDF) available online.
Please also be aware of the general return and refund policies and sustainability commitments provided by the platform.