Tuya Zigbee Water Leakage Sensor

Contents

Tuya Zigbee Water Leakage Sensor User Manual

Model: Zigbee Water Leakage Sensor | Brand: Tuya

1. Introduction

Thank you for purchasing and using the Tuya Zigbee Water Leakage Sensor. This manual provides essential information for the correct installation, operation, and maintenance of your device. Please read it carefully to ensure proper usage and to avoid any damage or malfunction.

The Tuya Zigbee Water Leakage Sensor is a smart home device designed to detect water leaks and provide immediate alerts. It integrates seamlessly with compatible Zigbee gateways and can be controlled and monitored via smart home platforms like Tuya Smart Life or Zigbee2MQTT, offering complete smart home protection against water damage.

2. Safety Precautions

  • Do not install the product outdoors, on an unstable base, or in any location unprotected from direct rain or extreme weather conditions.
  • Ensure the installation surface for the sensor is smooth, flat, dry, and clean to prevent false readings or improper adhesion.
  • This device requires a Zigbee Gateway (hub) to function. It cannot operate as a standalone unit.
  • When installing batteries, ensure correct positive (+) and negative (-) polarity to prevent damage to the device.
  • Keep the device away from children and pets.

3. Package Contents

Please check the package for the following items:

  • Main Sensor Unit
  • Water Leakage Probe (with 1-meter cable)
  • User Manual

4. Product Overview

The water leakage sensor consists of a main unit and a wired probe. The main unit houses the electronics, status indicator, and reset button. The probe is designed to detect water contact.

Zigbee Water Leak Sensor Detector System overview with features and siren
Figure 1: Zigbee Water Leak Sensor Detector System overview, highlighting features like precision leak detection, history status tracker, smart scene automation, and a built-in 110dB siren alarm (for siren versions). A compatible Zigbee gateway is required.
App Remote Control interface and sensor placement in a bathroom
Figure 2: The sensor connected to a network via a Zigbee hub, allowing remote control and monitoring through apps like Smart Life, Tuya, or Zigbee2MQTT. Shows typical placement in a bathroom.

5. Specifications

The Tuya Zigbee Water Leakage Sensor comes in different versions with slight variations. Please refer to the table below and the specific model you purchased.

General Specifications (No Siren Version)

Feature Detail
Product Type Water Leak Detector
Shell Material ABS
Connection Protocol ZigBee 3.0 (requires Zigbee hub)
Working Temperature -10°C ~ 55°C
Battery Type 2*LR03 (AAA, not included)
Standby Current ≤10uA
Operating Humidity 0% ~ 99%RH
Product Size 70 × 24.5 × 20mm
Line Length 1 meter

General Specifications (Siren Alarm Version)

Feature Detail
Product Type Water Leak Detector
Shell Material ABS
Connection Protocol ZigBee 3.0 (requires Zigbee hub)
Working Temperature -10°C ~ 55°C
Battery Type 2*LR03 (AAA, not included)
Standby Current ≤10uA
Built-in Siren 110dB
Operating Humidity 0% ~ 99%RH
Product Size 72 × 32 × 24mm
Line Length 1 meter

Additional Details

  • Certification: CE, RoHS
  • Origin: Mainland China
  • Smart Home Platform: Tuya, Other (e.g., Zigbee2MQTT)
Product Version Comparison Table
Figure 3: Comparison table for different versions (Z2M/Tuya, with/without Siren Alarm), detailing compatibility and features.
Specifications for the Siren Alarm version
Figure 4: Detailed specifications for the Siren Alarm version, including dimensions and battery type.
Specifications for the No Siren version
Figure 5: Detailed specifications for the No Siren version, including dimensions and battery type.

6. Setup

6.1. Power On

  1. Open the battery cover on the main sensor unit.
  2. Install 2x AAA (LR03) batteries, ensuring correct positive (+) and negative (-) polarity. The device will power on automatically.

6.2. Physical Installation

Install the product on a flat, dry, and clean surface using double-sided tape (not included) or by simply placing it in the desired detection area. Position the water leakage probe where water might accumulate, such as:

  • Under sinks in kitchens or bathrooms.
  • Near washing machines or dishwashers.
  • Next to water heaters or pipes.
  • On window sills where leaks might occur.
Widely Application examples for the water leak sensor
Figure 6: Examples of wide application areas for the Zigbee water leak sensor, including laundry rooms, kitchens, bathrooms, and window sills.

6.3. Network Configuration (Pairing with Zigbee Gateway)

Important: A Zigbee Gateway (hub) is required and is not included with the sensor. The sensor cannot function without being connected to a compatible Zigbee gateway.

  1. Ensure your Zigbee Gateway is powered on and connected to your home network (e.g., via Wi-Fi router).
  2. Enter Pairing Mode: Press and hold the RESET button on the sensor for approximately 5 seconds, then release. The LED indicator on the sensor will flash slowly, indicating it is in network configuration mode.
  3. Add Device in App: Open your Zigbee gateway's smart home application (e.g., Tuya Smart Life App, or access your Zigbee2MQTT interface). Follow the in-app prompts to add a new device.
  4. Compatibility Mode (if needed): If the sensor fails to connect, press and hold the RESET button for approximately 10 seconds until the indicator flashes quickly. Then, try adding the device again through your gateway's app.
  5. Once successfully paired, the sensor will synchronize parameters with the app. You may need to trigger the sensor once (e.g., by briefly touching the probe to water) to ensure initial data synchronization.
Zigbee Water Leak Sensor Ecosystem diagram
Figure 7: Diagram illustrating the Zigbee Water Leak Sensor Ecosystem, showing how the sensor connects to a Zigbee Smart Gateway (sold separately) which then connects to a standard home WiFi router, allowing access via a user app interface.
Z2M (No Alarm) version compatibility and app example
Figure 8: Example of Z2M (No Alarm) version compatibility, showing it works with Zigbee2MQTT and an example of the app interface. A Zigbee gateway is required.

7. Operating Instructions

7.1. Leak Detection and Alerts

  • When the sensor's probe detects water, it will immediately trigger an alert.
  • App Notifications: Warning messages are sent instantly to your smartphone via the connected smart home app (Tuya Smart Life, Zigbee2MQTT).
  • Siren Alarm (Siren Version Only): If you have the version with a built-in siren, a loud 110dB alarm will sound locally at the sensor.
Advanced Leakage Alert System diagram
Figure 9: Diagram of the Advanced Leakage Alert System, showing the three steps: 1. Detect Leak (Smart Sensor), 2. Loud Siren Alarm (110dB High-Decibel Alarm), and 3. Mobile Alert & Record via the app.

7.2. History Record

The smart home app allows you to view a complete alert history. You can track real-time probe status and review detailed historical detection logs directly on your phone, providing a modern water defense system.

7.3. Smart Scene Automation

Leverage the capabilities of your smart home platform to create intelligent automation scenes based on water detection:

  • Condition: Water detected by the sensor.
  • Action: Trigger other smart devices, such as:
    • Turning off a smart water valve to prevent further flooding.
    • Activating a separate smart siren or alarm system.
    • Turning on smart lights to indicate a problem.
Intelligent Scene Linkage with Water Sensor
Figure 10: Illustrates Intelligent Scene Linkage: Step 1 (Water Detected), App Scene Configuration (If Condition: Detect Water Leak, Then Action: Trigger Alarm/Switch), and Step 3 (Action Taken, e.g., Smart Siren & Light).
Automated Leakage Protection System diagram
Figure 11: Diagram of an Automated Leakage Protection System, showing detection, app notification, automation (siren, smart switch, valve), and water valve actuator closing for protection.

8. Maintenance

8.1. Battery Replacement

The sensor is powered by 2x AAA (LR03) batteries. When the battery level is low, your smart home app will typically send a notification. To replace the batteries:

  1. Open the battery cover on the main sensor unit.
  2. Remove the old batteries.
  3. Insert new 2x AAA (LR03) batteries, ensuring correct positive (+) and negative (-) polarity.
  4. Close the battery cover securely.

8.2. Cleaning

To ensure accurate detection and prolong the lifespan of your sensor:

  • Keep the sensor unit and the water leakage probe clean and free from dust, dirt, or debris.
  • Use a soft, dry cloth for cleaning. Do not use abrasive cleaners, solvents, or immerse the device in water.

8.3. Placement Check

Periodically check the sensor's placement to ensure it remains in an optimal position for detecting leaks and that the probe is making good contact with the surface.

9. Troubleshooting

9.1. Device Not Connecting to Gateway

  • Ensure your Zigbee gateway is powered on, functioning correctly, and within range of the sensor.
  • Check the sensor's batteries; replace them if they are low or depleted.
  • Try re-entering pairing mode by pressing the RESET button for 5 seconds (slow flash) or 10 seconds (fast flash for compatibility mode) and re-attempting to add the device via your app.
  • Verify that you are using the correct type of Zigbee gateway for your sensor version (e.g., Tuya gateway for Tuya versions, Zigbee2MQTT for Z2M versions).

9.2. No Alerts When Water is Detected

  • Check the sensor's battery level in your smart home app.
  • Ensure the sensor probe is making proper contact with the water. The water must bridge the two metal contacts on the probe.
  • Verify that app notification settings are enabled on your smartphone and within the smart home app itself.
  • For siren versions, ensure the siren function is enabled and configured correctly in the app (if applicable).

9.3. False Alarms

  • Ensure the installation area is genuinely dry and free from condensation, high humidity, or residual moisture that could trigger the sensor.
  • Clean the sensor probe to remove any residue (e.g., dust, mineral deposits) that might be causing false readings.

10. User Tips

  • For optimal performance, strategically place sensors in all high-risk areas for water leaks, such as under sinks, near washing machines, water heaters, dishwashers, and in bathrooms.
  • Regularly check the battery status through your smart home app to ensure continuous protection and avoid unexpected downtime.
  • Experiment with smart scene automation to integrate the water sensor with other smart devices for enhanced home security and automated responses to leaks.

11. Warranty and Support

For detailed warranty information, technical support, or any product-related inquiries, please refer to the seller's policies or contact Excellux Global Store directly.

An official user manual PDF is also available for download: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.