XIAOMI Mist Free Humidifier 3

Contents

Xiaomi Mist Free Humidifier 3 User Manual

Model: Mist Free Humidifier 3

Brand: XIAOMI

1. Safety Instructions

Please read this manual carefully before using the product and keep it for future reference.

  • This machine is for indoor use only.
  • This product should not be used by individuals with physical, sensory, or mental disabilities, or those lacking experience and knowledge (including children), unless supervised or instructed by a guardian to ensure safe use.
  • Do not allow children to play with the product. Supervise children and pets to keep them away during operation.
  • Do not plug or unplug the power adapter with wet hands to avoid electric shock.
  • Do not disassemble, repair, or modify this product without authorization.
  • Do not invert the machine when it is powered on or contains water inside, to avoid damaging internal electronic components.
  • During operation, do not separate the main body and water tank, and do not touch the air outlet.
  • Use at normal room temperature (5℃-40℃).
  • If the humidifier body is tilted, water may overflow. Ensure it is placed stably during use.
  • Unplug the power adapter before adding water and cleaning.
  • Always keep the power adapter dry and intact.
  • When pouring water out of the water tank, first turn off the machine and unplug the power adapter.
  • Unplug the power adapter during thunderstorms or when not in use for a long time.
  • If the product exhibits abnormal phenomena, immediately unplug the power adapter and contact after-sales service.
  • Only use the original power adapter model AD-0131200110CN.
  • Before performing maintenance or moving the humidifier, unplug the power adapter from the power outlet.
  • When unplugging the power adapter, pull from the plug, not the cable.
  • If the power adapter is damaged, it must be replaced with a special component purchased from its manufacturer or repair department.

Pre-Use Tips:

  • Opening windows will accelerate the diffusion of humidified air indoors. To ensure better humidification, reduce ventilation.
  • This product uses an evaporative humidification method. Water in the tank will evaporate, leaving impurities and minerals in the residual water. To prevent water quality deterioration, it is recommended to clean the main unit and water tank once a week.

2. Product Overview

The humidifier operates on the principle of natural evaporation. The filter effectively purifies impurities in the water, and the purified water evaporates through the wind, forming flowing fresh air and evenly humidifying.

Key Features:

  • Mist-Free Cold Evaporation Technology: Produces no visible water mist, eliminating 'white powder' pollution and preventing furniture/floors from getting wet.
  • Triple Antibacterial Design: Features a silver ion module, UV-C germicidal lamp (for some versions), and a 3D antibacterial filter, achieving an antibacterial rate exceeding 99%. Certified safe for mothers and babies.
  • Direct Tap Water Use: Can be filled directly with tap water for healthy and clean humidification.
  • High Humidification Capacity: 400mL/h, easily humidifies a 20-30㎡ bedroom or living room.
  • Large Water Tank: 4L capacity provides up to 72 hours of continuous humidification in low-power mode, or 18 hours of long-lasting soothing.
  • Dome Display: Real-time display of current humidity and water level for clear monitoring.
  • Smart Integration: Deeply integrated with the Mi Home APP for remote control (on/off, timer, mode adjustment, filter lifespan monitoring) and intelligent constant humidity mode.
  • Low Noise Operation: Operates at a quiet 29.4dB(A) for peaceful sleep.
  • Washable Filter: The 3D antibacterial filter is both machine washable and hand washable for durability and easy maintenance.

Product Components:

  1. Button
  2. Water Level Float
  3. Body
  4. Water Tank
  5. Filter
  6. Silver Ion Box
  7. Filter Bracket
  8. Air Inlet
  9. Lower Coupler
  10. Display Screen
  11. Power Adapter
  12. Air Outlet
Diagram of Xiaomi Mist Free Humidifier 3 features and components

Figure 1: Overview of Humidifier Features and Components

3. Setup

Initial Placement:

  • Place the humidifier on a flat and stable surface.
  • Avoid placing it near walls or obstructions to ensure optimal performance.
  • Keep away from heat sources and direct sunlight.

Power Connection:

  1. Ensure the humidifier is correctly assembled and placed.
  2. Connect the power adapter to the humidifier's power port.
  3. Plug the power adapter into a suitable power outlet.
  4. The humidifier will emit a "beep" sound and enter standby mode.

4. Operation

Adding Water:

Important: Unplug the humidifier before adding water. Do not add hot water, fragrances, essential oils, or disinfectants to the water tank.

There are two methods for adding water:

  • Method 1 (Top Fill): Directly pour water into the top opening. Do not exceed the MAX water level mark on the water tank.
  • Method 2 (Remove Tank):
    1. Turn off and unplug the humidifier.
    2. Lift off the main body.
    3. Remove the filter.
    4. Pour water into the water tank. Do not exceed the MAX water level mark.
    5. Reassemble the filter and main body.

Note: Use clean tap water or purified water. If your local water quality is hard, purified water is recommended to reduce scale buildup.

Humidifier with top-fill water addition

Figure 2: Adding Water (Top Fill Method)

Power On/Off:

  • Power On: In standby mode, short press the Power Button (button 1 on the diagram). The humidifier will emit a "beep" sound and begin operation. The first time it is turned on, it defaults to Constant Humidity mode with a target humidity of 55% RH.
  • Pause/Resume: Short press the Power Button to pause operation. Short press the Power Button or Mode Button to resume.

Operating Modes:

Short press the Mode Button (button 2 on the diagram) to cycle through the following modes:

  • Constant Humidity Mode: The default target humidity is 55% RH. This can be adjusted via the Mi Home APP. The humidifier automatically adjusts its output to maintain the set humidity level.
  • Strong Mode: Provides maximum humidification output.
  • Sleep Mode: Operates at the lowest humidification output with minimal noise. The display screen automatically dims for undisturbed sleep.
Humidifier dome display showing humidity percentage

Figure 3: Dome Display showing current humidity

Wi-Fi Connection (Mi Home APP):

This product can be controlled via the Mi Home APP and linked with other smart devices.

  1. Download APP: Scan the QR code below or search for "Mi Home" in your app store to download and install the app.
  2. Add Device: Open the Mi Home APP. If you have the app installed, it may automatically detect the device. Otherwise, click the "+" icon in the top right corner of the homepage and follow the in-app instructions to add the humidifier.
  3. Reset Wi-Fi: If connection fails, long press the Wi-Fi Button (button 3 on the diagram) for 7 seconds to reset the Wi-Fi.
QR code for Mi Home App

Figure 4: Mi Home APP QR Code

Wi-Fi Indicator Status:
Wi-Fi Status Indicator Status
Waiting for connection Orange flashing
Connecting Blue flashing
Connected Blue solid
Connection failed Orange solid
Off Off

Child Lock:

  • Activate/Deactivate: Long press the Power Button and Mode Button simultaneously for 7 seconds, or control via the Mi Home APP.
  • When activated, pressing any button will cause the child lock indicator to flash twice and emit a "beep" sound, and the humidifier will not respond to button presses.

5. Maintenance

Important: Always unplug the power adapter before performing any cleaning or maintenance.

Disassembly and Assembly of Main Body:

  • To disassemble, lift the main body vertically upwards.
  • To assemble, align the Xiaomi brand logo on the main body with the water level window on the water tank. When correctly assembled and powered on, the humidifier will emit a "beep" sound.

Cleaning the Water Tank:

  • Pour out any residual water from the tank.
  • Wipe the inside of the water tank with a clean, soft cloth.
  • Dry the outside of the water tank and the lower coupler.

Cleaning the Filter:

  • Rinse the filter repeatedly under clean running water 2-3 times.
  • Do not squeeze the filter or expose it to direct sunlight for drying.
  • It is recommended to replace the filter every 3-6 months. Purchase official replacement filters.

Cleaning the Water Path (Descaling):

  1. Prepare a citric acid solution according to the instructions of your purchased citric acid product and add it to the water tank.
  2. Long press the Mode Button (button 2) for 7 seconds to enter cleaning mode. The humidifier will run for 30 minutes, then emit a "beep" sound to indicate the cleaning mode is complete.
  3. Pour out the citric acid solution from the water tank. Rinse the water tank and filter thoroughly with clean water.

Note: To prevent scale buildup and prolong service life, it is recommended to clean the water path with citric acid every 1-2 months, depending on water quality and usage frequency.

Cleaning the Water Level Sensor:

  • Wipe the water level sensor with a damp soft cloth.
  • Do not use hard objects to scrape the sensor.
  • It is recommended to clean the water level sensor every 1-3 months, depending on water quality.

Replacing the Silver Ion Box:

  1. Lift the filter bracket vertically from the water tank.
  2. Remove the old silver ion box from the bottom of the filter bracket.
  3. Gently push the new silver ion box (included with replacement filters) into place at the bottom of the filter bracket.

Note: It is recommended to replace the silver ion box every 6 months.

General Cleaning Precautions:

  • Do not use abrasive, corrosive, or flammable cleaning agents on any part of the humidifier.
  • Do not immerse the humidifier body or water tank in water.
  • Do not invert the display screen to prevent damage.
  • When storing the humidifier for a long period, empty all water from the water path, clean and dry all components, then reassemble and store in a cool, dry place in its packaging.

6. Troubleshooting

Problem Possible Cause Solution
No Power Power adapter not plugged in or loose connection Check and plug in the power adapter securely
Main body not installed correctly Install the main body correctly
Water or foreign objects on the lower coupler Wipe off water or foreign objects from the lower coupler with a dry cloth
Power adapter fault Contact after-sales service
Not Working Low water level Add water
APP cannot find humidifier Network connection failed Reset Wi-Fi
Weak Wi-Fi signal Keep your phone close to the humidifier for better signal
Humidifier not powered on Power on the humidifier correctly
Water Overflow Humidifier not placed stably Place the humidifier on a stable surface
Filter drain hole blocked Clean the filter top cover drain hole
Abnormal Humidity Display Air inlet blocked Remove any obstructions from the air inlet
Humidity sensor fault Contact after-sales service
Pump Noise Low water level causing pump to run dry Add water, gently shake the water tank, and allow it to operate for one minute to restore normal function
Display Screen Shows "E" Water path and water level sensor need cleaning Clean the water path and water level sensor
Display Screen Shows "80" Pump stalled Contact after-sales service
Fan/Pump Not Working Fan or pump fault Contact after-sales service

7. Specifications

Parameter Value
Product Name Humidifier
Product Model CJSJSQ02XY
Rated Power 9W
Working Voltage 12V
Power Adapter Model AD-0131200110CN
Power Adapter Input 100-240V~ 50/60Hz 0.5A
Power Adapter Output 12V 1.1A
Product Dimensions Φ230 x 390mm
Water Tank Capacity 4L
Product Net Weight 2.6kg
Rated Humidification Capacity 400mL/h
Noise <50dB(A) (A-weighted sound power level)
Wireless Connectivity Wi-Fi IEEE 802.11b/g/n 2.4GHz, Bluetooth 4.2
CMMIT ID 2019DP11626
Standards GB 4706.1-2005, GB 4706.48-2009, GB 4343.1-2018, GB 17625.1-2022
Installation Portable
Humidification Method Non-mist
Shape Classic Columnar
Use Household

8. User Tips

  • To maintain optimal humidification and cleanliness, clean the filter weekly.
  • When cleaning the filter, ensure the water temperature does not exceed 40°C. Do not dry the filter by heating.
  • For long-term optimal performance, consider replacing the filter every 6-12 months.
  • Always ensure the device is unplugged from the power source before adding water or performing any maintenance.
  • The Mi Home APP interface may undergo updates; always refer to the current app version for the most accurate instructions.

9. Warranty and Support

For detailed warranty information, technical support, or service inquiries, please refer to the official Xiaomi website or contact their authorized customer service. Keep your purchase receipt as proof of purchase.

A PDF version of this user manual is available for download at: Xiaomi Mist Free Humidifier 3 User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.