GGBEE 16A wifi smart switch

Contents

GGBEE 16A WiFi Smart Switch DIY Module User Manual

Model: 16A WiFi Smart Switch

1. Introduction

The GGBEE 16A WiFi Smart Switch DIY Module is designed to convert traditional non-smart appliances and lighting into smart, controllable devices. This module integrates seamlessly with the eWelink app and supports voice control via popular assistants like Amazon Alexa and Google Home. It offers remote control, scheduling, and group control functionalities to enhance your smart home experience.

GGBEE 16A WiFi Smart Switch DIY Module with eWelink, Alexa, and Google Assistant logos
Figure 1: GGBEE 16A WiFi Smart Switch DIY Module overview, showing compatibility with eWelink, Alexa, and Google Assistant.

2. Safety Information

  • Ensure all power is disconnected before installation or maintenance.
  • Installation should be performed by a qualified electrician if you are unsure.
  • Do not connect the neutral wire or live wire to the S1/S2 terminals.
  • Strictly follow the wiring diagrams provided. Incorrect wiring can cause damage to the device or electrical system, and may pose a safety hazard.
  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble or repair the device yourself.

3. Package Contents

  • 1 x GGBEE 16A Mini Smart Switch DIY Module

Note: This package includes only the items listed above. Other products shown in promotional images are not included.

4. Specifications

Attribute Value
Product Name 16A mini smart switch
Model Number 16A wifi smart switch
Dimensions 4 x 4 x 2.2 cm
Material PC V-0
Input AC 100-240V 50/60Hz
Output AC 100-240V 50/60Hz
Maximum Current 16A
Max Load for LED 150W
WiFi Standard 2.4G IEEE 802.11 b/g/n
Communication Method Wi-fi
Compatible APP eWelink
Camera Equipped No
State of Assembly Ready-to-Go
Certifications CE, RoHS
Product dimensions and specifications table
Figure 2: Detailed product dimensions and key specifications.

5. Installation

The GGBEE Mini Smart Switch is designed for easy installation in a standard switch installation box or directly on a lamp.

Diagram showing easy installation of the mini smart switch into a switch box or on a lamp
Figure 3: The mini smart switch can be easily installed in a switch box or directly on a lamp.

5.1 Wiring Instructions

  1. Ensure the main power supply is turned OFF before beginning any wiring.
  2. Connect the L-out terminal of the smart switch to the Lamp's Live (L) input.
  3. Connect the N-out terminal of the smart switch to the Lamp's Neutral (N) input.
  4. Connect the L-in terminal of the smart switch to the Mains Live (L) wire.
  5. Connect the N-in terminal of the smart switch to the Mains Neutral (N) wire.
  6. The S1/S2 terminals can be connected to a traditional rocker light switch for manual control or left unconnected if only app/voice control is desired.
  7. **Important:** Do NOT connect the neutral wire or live wire to the S1/S2 terminals. These are for switch control signals only.
Wiring diagram for dual control with a 2-way switch
Figure 4: Wiring diagram for connecting the smart switch with a lamp and an optional 2-way switch for dual control.

After wiring, carefully secure the module within the switch box or lamp housing. Restore power only after ensuring all connections are correct and secure.

6.1 Pre-requisites

  • Your smartphone's operating system must be Android 5.0/iOS 10 or higher.
  • Your phone must have access to the app store to download the eWelink app.
  • Ensure your router's Mac address filtering is disabled, if applicable.
  • Your phone must be connected to a 2.4GHz WiFi network.
  • Bluetooth must be enabled on your phone.

6.2 Quick Pairing Mode

  1. Download the eWelink APP from your phone's app store.
  2. Connect your phone to a 2.4GHz WiFi network and turn on Bluetooth.
  3. Long press the pairing button on the smart switch module for more than 5 seconds until the blue LED indicator blinks twice quickly and then stays on. This indicates the device has entered pairing mode.
  4. Open the eWelink APP on your phone.
  5. Tap the "+" icon in the top right corner of the screen to add a new device.
  6. Select the WiFi network your phone is connected to, confirm the relevant information, and click "Next".
  7. Once the device is found by the app, click the "+" icon next to it to add it to your account.

6.3 Compatible Pairing Mode (If Quick Pairing Fails)

If you encounter issues with Quick Pairing Mode, try the Compatible Pairing Mode:

  1. Long press the pairing button on the smart switch for 5 seconds until the WiFi LED indicator cycles through two short flashes and one long flash. Release the button.
  2. Long press the pairing button again for 5 seconds until the WiFi LED indicator flashes quickly. The device is now in Compatible Pairing Mode.
  3. In the eWelink app, tap "+" and select "Compatible Pairing Mode".
  4. Select the Wi-Fi SSID starting with "ITEAD-*****" from the list of available networks.
  5. Enter the password "12345678" for the "ITEAD-*****" network.
  6. Return to the eWelink APP and tap "Next".
  7. Be patient while the pairing process completes.

7. Operating Instructions

Once paired, you can control your smart switch using the eWelink app from anywhere with an internet connection.

  • Switch On/Off: Tap the switch icon in the app to turn the connected appliance or light on or off.
  • Timing: Set specific times for the switch to turn on or off automatically.
  • Countdown: Configure a countdown timer for the switch to activate or deactivate after a set duration.
  • Cycle: Set recurring schedules for daily operation.
  • Group Control: Group multiple smart switches together to control them simultaneously (e.g., turn off all living room lights with one tap).
  • Smart Scenes: Link the smart switch with other intelligent scenes or devices to automate actions based on conditions (e.g., turn on lights when motion is detected).
  • Sharing: Share control of the device with family members. The main account retains full control and can manage shared access.
Screenshot of eWelink app showing remote control of lights
Figure 5: Remote control of lights via the eWelink mobile application.
Screenshots of eWelink app showing timing, countdown, and cycle scheduling features
Figure 6: Setting up timers, schedules, and countdowns within the eWelink app.

7.2 Voice Control

The smart switch is compatible with voice assistants for hands-free control:

  • Amazon Alexa: Link your eWelink account to Alexa through the Alexa app. Then, use commands like, "Alexa, turn on the living room light."
  • Google Assistant: Link your eWelink account to Google Assistant through the Google Home app. Then, use commands like, "Hey Google, turn off the bedroom lamp."
Person using voice commands with Alexa or Google Home to control a light
Figure 7: Voice control integration with smart assistants.

7.3 Status Memory Function

The device can remember its last state (on or off) before a power outage and restore it when power returns. This setting can be configured within the eWelink app.

Screenshot of eWelink app showing relay status settings for power-off memory
Figure 8: Configuring the power-off status memory function in the eWelink app.

8. User Tips

  • For optimal performance, ensure your WiFi router is within a reasonable range of the smart switch.
  • If you experience connectivity issues, try restarting your router and the smart switch.
  • Regularly check the eWelink app for firmware updates to ensure the best functionality and security.
  • When using voice control, ensure the device name in the eWelink app is simple and easy for the voice assistant to recognize.

9. Troubleshooting

9.1 Device Not Pairing

  • Check WiFi: Ensure your phone is connected to a 2.4GHz WiFi network. The smart switch does not support 5GHz networks.
  • Bluetooth: Make sure Bluetooth is enabled on your phone during the pairing process.
  • Router Settings: Temporarily disable Mac address filtering on your router if it's enabled.
  • Pairing Mode: Confirm the device's LED indicator is blinking correctly for the chosen pairing mode (Quick or Compatible). If not, repeat the long press on the pairing button.
  • Distance: Bring the smart switch closer to your WiFi router and phone during pairing.
  • Compatible Mode: If Quick Pairing fails, try the Compatible Pairing Mode as described in Section 6.3.

9.2 Device Offline in App

  • WiFi Signal: Check if the WiFi signal strength at the device's location is adequate.
  • Router Status: Ensure your WiFi router is working correctly and has internet access.
  • Power Supply: Verify the smart switch has a stable power supply.
  • Restart: Try restarting the smart switch (by cycling its power) and your WiFi router.

9.3 Voice Control Not Working

  • Account Linking: Ensure your eWelink account is correctly linked to your Alexa or Google Home account.
  • Device Name: Check if the device name in eWelink is recognized by your voice assistant. Try simplifying the name.
  • Internet Connection: Verify that both your voice assistant device and the smart switch have active internet connections.

10. Maintenance

  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Avoid exposing the device to extreme temperatures or direct sunlight.
  • Ensure proper ventilation if installed in an enclosed space.

11. Warranty and Support

For any issues or support inquiries, please refer to the seller's contact information or the eWelink app's support section. Please note that the manufacturer is not responsible for any accidents or product malfunction resulting from failure to follow the instructions provided in this manual.

A user manual in PDF format may be available for download. Please check the product page or contact the seller for the link: User manual (PDF)

12. Compliance and Certifications

This device complies with the following certifications:

  • CE
  • RoHS

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.