Yeelight D1

Contents

YEELIGHT Smart LED Bulb D1 Instruction Manual

Model: YP-0846 | Brand: Yeelight

Introduction

The Yeelight Smart LED Bulb D1 is an advanced smart lighting solution offering vibrant RGBCW colors, high brightness, and seamless integration with various smart home ecosystems. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance and user experience.

Yeelight Smart LED Bulb D1 product image
Yeelight Smart LED Bulb D1

Setup Instructions

Before installation, ensure the power is off at the main circuit breaker (MCB).

  1. Power Off: Turn off the main circuit breaker (MCB) to the light fixture where the bulb will be installed.
  2. Diagram showing MCB in OFF position
    Step 1: Turn off power at the MCB.
  3. Install Bulb: Carefully screw the Yeelight Smart LED Bulb D1 into a standard E27 socket.
  4. Power On: Turn on the main circuit breaker (MCB). The bulb should light up.
  5. Diagram showing bulb being screwed in and MCB in ON position
    Steps 2 & 3: Install bulb and restore power.
  6. Reset (if needed): If the bulb does not respond or you wish to reset it, turn the light switch ON and OFF 5 times consecutively. The bulb will flash to indicate a successful reset.
  7. Diagram showing reset procedure by cycling power 5 times
    Step 4: Resetting the bulb.
  8. Pairing Options: The Smart LED Bulb D1 can be paired using two main methods:

Option 1: Matter Controller

The Smart LED bulb D1 must be paired with a Matter controller before it can be used for smart control in the Yeelight, Apple Home, Google Home, Alexa, SmartThings, or Matter ecosystems. You need a Matter Controller with Thread Border Router support and up-to-date firmware on all devices.

Diagram showing Matter pairing with a Matter Controller
Pairing with a Matter Controller.

Examples of smart home hubs that support Matter and Thread:

Table of compatible Matter and Thread hubs including Apple HomePod, Amazon Echo, Google Nest, and Samsung SmartThings
Compatible Matter and Thread Hubs

Option 2: Yeelight App (requires Yeelight Hub)

To control the bulb via the Yeelight App, a Yeelight Hub (sold separately) is required.

Diagram showing Yeelight App pairing with a Yeelight Hub
Pairing with Yeelight App and Hub.

Download the Yeelight App:

  • Scan the QR code below or search for 'Yeelight' in your device's app store.
QR code for Yeelight App download and app store icons for iOS and Android
Download the Yeelight App.

Operating Instructions

The Yeelight Smart LED Bulb D1 offers a variety of features for personalized lighting.

Brightness and Color Control

  • High Brightness: Enjoy up to 1300 lumens for ample illumination.
  • Image illustrating 1300 lumens brightness
    1300lm High-Brightness Smart Bulb
  • Vivid RGBCW Colors: Choose from millions of colors and adjustable color temperatures (2700K-6500K) to create the perfect ambiance.
  • Image showing the bulb displaying various RGB colors
    Vivid RGBCW Colors
  • Gentle Fade-In and Fade-Out: The bulb features a standard 2-second soft dimming/fading effect and smooth dimming transitions with brightness adjustment accurate to 1,000 levels for fine and seamless tuning.
  • Diagram illustrating a 2-second fade-in/fade-out transition
    Gentle Fade-In and Fade-Out

Control Options

Control your lighting with various methods to fit your lifestyle:

  • Voice Control: Use Siri, Alexa, or Google Assistant with commands like "Hey Siri, Help me turn on the light" or "Ok, Turn on the light."
  • Multi-platform Control: Compatible with Apple Home, Google Home, Alexa, and Samsung SmartThings.
  • Mobile Control: Use the Yeelight App for comprehensive control anytime, anywhere.
Image showing multiple control options including voice control with smart speakers and mobile app control
Multiple Control Options

Advanced Features

  • Adaptive Lighting: Enjoy lighting that automatically adjusts to your environment.
  • Smart Scenes & Automations: Create custom lighting scenes and automate schedules through the Yeelight App or your preferred smart home platform.
  • Default State After Power On: Configure the bulb's behavior when power is restored.
  • Transition Duration: Customize the duration of light transitions for a personalized experience.
Diagrams illustrating adaptive lighting, default power-on state, smart scenes, and transition duration settings
Adaptive Lighting and Customization Options

Maintenance

To ensure the longevity and optimal performance of your Yeelight Smart LED Bulb D1, follow these simple maintenance guidelines:

  • Cleaning: Ensure the bulb is cool and the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners.
  • Environment: Use the bulb in dry locations only. Avoid using it in environments with extreme temperatures or high humidity.
  • Disposal: All products bearing the WEEE symbol (Waste Electrical and Electronic Equipment) should not be mixed with unsorted household waste. Protect human health and the environment by handing over your waste equipment to a designated collection point for recycling. Correct disposal and recycling help prevent potential negative consequences to the environment and human health.

Troubleshooting

If you encounter issues with your Yeelight Smart LED Bulb D1, try the following steps:

  • Bulb Not Responding: If the bulb does not light up or respond to commands, ensure it is properly screwed into the socket and the power supply is active.
  • Resetting the Bulb: To perform a factory reset, turn the light switch ON and OFF 5 times consecutively. The bulb will flash to confirm the reset. This can resolve many connectivity issues.
  • Connectivity Issues (Matter/Thread): Ensure your Matter controller has Thread Border Router support and that its firmware, along with all connected devices, is up-to-date. Outdated firmware can lead to malfunctions.
  • App Control Issues: If using the Yeelight App, ensure you have a Yeelight Hub (sold separately) connected and properly configured. Check your Wi-Fi connection and ensure the app is updated to the latest version.
  • Dimming Issues: Do not use the bulb with traditional dimmers. It is designed for smart dimming via its integrated controls or smart home platforms.

Specifications

FeatureSpecification
ModelYP-0846
Rated Input100-240V~50/60Hz Max 0.12A
Rated Power11W
Network Standby Power (Pnet)0.50 W
Color Temperature Range2700K-6500K
Luminous Flux (Φuse)1300lm @4000K
Color Rendering Index (CRI)80
Rated Color Temperature (RCS)4000K
LifetimeApprox. 15000 h
Operating Temperature-10°C to 45°C
Bluetooth Operation Frequency2402-2480 MHz
Bluetooth Maximum Output Power10 dBm
Thread Operation Frequency2405-2480MHz
Thread Maximum Output Power10 dBm
Wireless ConnectivityBluetooth, Thread
Bulb Dimensions60*118mm
CertificationCE
Item TypeTable Lamps
Bulbs IncludedYes
Batteries IncludedNo
High-concerned chemicalNone
Power SourceDC
Voltage121V-240V
Detailed specifications diagram of the Yeelight Smart LED Bulb D1
Detailed Specifications

Warranty and Support

Manufacturer Information

Qingdao Yeelink Information Technology Co., Ltd.
Address: 10F-B4, Building B, Qingdao International Innovation Park, No.1 Keyuan Weiyi Road, Laoshan District, Qingdao City, Shandong Province, P.R.China.

EU Declaration of Conformity

Hereby, Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YP-0846 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.yeelight.com/eu/declaration

The product is in compliance with comply UK PSTI regulations, the full text of declaration of conformity is available at the following internet address: https://www.yeelight.com/eu/declaration

Additional Resources

A PDF version of the user manual is available for download: Download User Manual (PDF)

User Tips

  • Ensure you have the correct E27 socket type for installation.
  • For Matter functionality, ensure you have a compatible Matter controller with Thread Border Router support and up-to-date firmware on all devices to prevent malfunctions.
  • Keep the bulb's firmware updated for optimal performance and access to the latest features.

Frequently Asked Questions

Q: What smart home ecosystems are compatible with the D1 bulb?
A: The D1 bulb is compatible with Apple Home, Google Home, Alexa, and Samsung SmartThings, with native Matter support.
Q: Do I need a special hub to use the Yeelight Smart LED Bulb D1?
A: Yes, for Matter functionality, a Matter controller with Thread Border Router support and up-to-date firmware is required. For Yeelight App control, a Yeelight Hub (sold separately) is needed.
Q: What is the brightness of the D1 bulb?
A: The bulb offers a high brightness of up to 1300 lumens.
Q: Can I adjust the color and brightness?
A: Yes, the bulb features vivid RGBCW colors and adjustable color temperature (2700K-6500K), with smooth dimming transitions.

© 2023 Yeelight. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.