NMMINER NerdMiner 4.0 Plus

Contents

NMMINER NerdMiner Plus V4.0.0 Bitcoin Miner User Manual

Model: NerdMiner 4.0 Plus

1. Introduction

Welcome to the NMMINER NerdMiner Plus V4.0.0, a compact and efficient Bitcoin miner designed for enthusiasts. This manual provides detailed instructions for setting up, operating, and maintaining your device to ensure optimal performance.

Packing List

  • 1 x Main Unit (with case)
  • 1 x USB Data Cable
  • 1 x PP Box

2. Setup Guide

Step 1: Device Boot & Hotspot Connection

  1. Power On: Plug in the miner using the provided USB data cable. The screen will light up, displaying "Connecting to WiFi...". If a network is not configured or connection fails, the device will automatically switch to AP (Access Point) mode after approximately 60 seconds.
  2. Connect to Miner's Hotspot: On your phone or computer, open your Wi-Fi settings and connect to the network named "BTC_" followed by a unique identifier.
  3. Default Wi-Fi Password: 12345678
NerdMiner Plus screen showing 'Connecting to WiFi...' and current hashrate.
Figure 1: NerdMiner Plus display during initial boot, showing WiFi connection status and current hashrate.

Step 2: Login to the Management Dashboard

  1. Access Dashboard: After successfully connecting to the miner's Wi-Fi hotspot, open a web browser on your phone or computer and navigate to 192.168.4.1 or http://192.168.4.1/config.
  2. Login Credentials: Enter the default username and password:
    • Default Username: admin
    • Default Password: admin
  3. Change Language: Once logged in, you can switch the language to your preference using the drop-down menu located in the top right corner of the page.
Screenshot of the NerdMiner web interface showing online miners, total hashrate, and detailed miner status including IP, MAC, hashrate, uptime, and pool connection.
Figure 2: Example of the NerdMiner web management dashboard.

Step 3: Important Parameter Configuration

Important Note:

It is highly recommended to configure and save your Mining Settings, Display Settings, and other options first, and update the Network Settings last. This is because once the miner connects to your home Wi-Fi, the current configuration page will be disconnected.

3.1. Mining Settings (Required)

Expand the "Mining Settings" panel. Configure the primary and backup nodes:

  • Mining Pool Server: Default is public-pool.io (Primary) and solo.ckpool.org (Backup).
  • Mining Pool Port: Default is 21496 (Primary) and 3333 (Backup).
  • Mining Pool Password: Default is x.
  • Wallet Address: Replace this with your own Bitcoin (BTC) wallet address. Failure to do so will result in mined rewards not being credited to your account.

Click "Update Mining Settings" to save your changes.

3.2. Display & LED Settings (Optional)

Customize the visual aspects of your miner:

  • Screen Rotation: Supports four modes (Portrait: Cable at bottom/top, Landscape: Cable at right/left). Default is "Landscape: Cable at right".
  • Screen Brightness & Inactivity: Adjust brightness and set an inactivity timer to automatically turn off the screen, extending screen life.
  • Theme & Colors: Customize the web theme (Standard/Dark) and invert screen colors.
  • LED Settings: Adjust RGB LED brightness (0-255) independently. Default green LED brightness is maximum (255).

Click the corresponding update buttons to save.

3.3. User & Advanced Settings (Optional)

  • User Settings: For security, change the default login credentials (username and password). Passwords must be 8-32 characters, including uppercase/lowercase letters, numbers, and special characters.
  • Advanced Settings: Enable "Log Viewer" for system logs or clear historical mining statistics.

Step 4: Network Settings (Final Step)

After all other mining parameters are set and saved, proceed with the network connection:

  1. Expand the "Network Settings" panel.
  2. Click the "Scan" button to search for nearby Wi-Fi signals.
  3. Select your home Wi-Fi from the list or manually enter the SSID.
  4. Enter your home Wi-Fi password.
  5. (Optional) If a static IP is required, select "Yes" for "Static IP Address" and fill in the IP and gateway details.
  6. Click "Update Network Settings".

The miner will disconnect from its hotspot and connect to your configured Wi-Fi. The screen will then switch to the mining interface. Your miner is successfully online and mining when the Wi-Fi icon in the top-left corner displays normally and the hashrate updates on the screen.

NerdMiner Plus screen displaying network configuration details like IP Address, Subnet Mask, Gateway IP, and DNS Server.
Figure 3: NerdMiner Plus display showing network configuration details.

3. Operating Instructions

Once configured, your NerdMiner Plus will automatically begin mining. The device's screen will display real-time mining statistics.

NerdMiner Plus screen displaying mining statistics such as Total Hashes, Best Difficulty, Pool Jobs, Blocks Found, and Current Hashrate.
Figure 4: NerdMiner Plus display showing active mining statistics.

You can monitor your miner and adjust settings via the web management dashboard (refer to Step 2 of the Setup Guide for access).

4. Maintenance

  • Firmware Upgrades: Regularly check for and install firmware updates to ensure you have the latest features and security patches. Visit the official firmware upgrade page at https://www.nerdminerplus.com/ for instructions and downloads.
  • Screen Longevity: Utilize the inactivity timer in the Display & LED Settings to automatically turn off the screen after a period of no operation, prolonging its lifespan.
  • Cleaning: Keep the device clean and free from dust to ensure proper ventilation and operation. Use a soft, dry cloth for cleaning.
  • Historical Data: Periodically clear historical mining statistics from the User & Advanced Settings if desired.

5. Troubleshooting

  • Device Not Connecting to Wi-Fi: If the device fails to connect to your home Wi-Fi, it will automatically enter AP mode. Reconnect to the "BTC_" hotspot and re-enter your Wi-Fi credentials carefully in the Network Settings.
  • No Mining Rewards: Ensure your Bitcoin (BTC) wallet address is correctly entered in the Mining Settings. Incorrect or missing wallet addresses will prevent you from receiving rewards.
  • Web Interface Disconnects: The web configuration page will disconnect once the miner successfully connects to your home Wi-Fi. This is normal behavior. To access the dashboard again, ensure your device (phone/computer) is on the same network as the miner and use the miner's assigned IP address (which can be found on the miner's display or your router's client list).
  • Hashrate Not Updating / Wi-Fi Icon Abnormal: If the Wi-Fi icon in the top-left corner of the miner's screen is not normal, or the hashrate is not updating, it indicates a network or mining pool connection issue. Verify your Wi-Fi connection, check your mining pool settings, and ensure your internet connection is stable.

6. Specifications

Feature Detail
Model Number NerdMiner 4.0 Plus
Display 2.8" Touch Display
Microcontroller ESP32-2432028R-PLUS
Hashrate 700+ KH/s
Power Consumption 1W
Transmission Rate 10/100Mbps
Weight (Device) 125g
Package Dimensions (L x W x H) 14 cm x 8 cm x 10 cm
Package Weight 0.2 kg
Battery Included No
Origin Mainland China

7. User Tips

  • Configuration Order: Always configure Mining Settings, Display Settings, and User & Advanced Settings before configuring Network Settings. This prevents premature disconnection from the setup interface.
  • Security Best Practices: Change the default 'admin' username and password for the web management dashboard immediately after initial setup to protect your device from unauthorized access.
  • Personalization: Explore the Display & LED Settings to customize screen rotation, brightness, web theme, and LED colors to match your preferences.
  • Centralized Monitoring: For advanced users, the device supports centralized monitoring. Download the monitoring service to your PC; once running, you can access the dashboard by entering the server's IP address into your phone or computer's browser.

8. Warranty & Support

For detailed product information, troubleshooting, and support, please refer to the official resources:

  • Official Firmware Upgrade Page: https://www.nerdminerplus.com/
  • User Manual (PDF): A comprehensive user manual in PDF format is available for download. Please refer to the product page or contact customer support for the direct link. (Reference: PDF User Manual)

For any further assistance, please contact your seller or refer to the product's online support channels.

© 2024 NMMINER. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.