1. Introduction
This manual provides essential information for the safe and effective use of the 16901-ZY3-003 Fuel Filter Element. This high-quality low-pressure fuel filter replacement is manufactured in full compliance with factory standards, ensuring perfect fitment and reliable performance for your Honda outboard engine's fuel system.
2. Important Safety Information
- Read all instructions before use.
- Failure to follow these instructions may result in damage to the product or personal injury.
- Warning: Keep the device and its hardware out of reach of children under 3 years old.
- General Safety: Keep away from children unless supervised by an adult.
- Intended Use: Do not use this product for purposes other than its intended use.
- Inspection: Inspect the product before each use; do not use if damaged.
- Installation Safety: Follow installation and operation guidelines to avoid injury.
- Fire Hazard: Fuel is highly flammable; ensure the engine is off and work in a well-ventilated area.
3. Compatibility
This fuel filter element is suitable for the following Honda 4-stroke outboard engines (V6 and other series):
- BF115D (2010 - 2021)
- BF135A (2004 - 2021)
- BF150A (2004 - 2021)
- BF175A / AK1 / AK2 / AK3 (2003 - 2021)
- BF200A / AK1 / AK2 / AK3 (2002 - 2021)
- BF225A / AK1 / AK2 / AK3 (2002 - 2021)
- BF250A (2012 - 2021)
4. Specifications
| Item | Details |
|---|---|
| Product Name | Fuel Filter Element (Compatible with Honda Outboards) |
| Model / OEM Number | 16901-ZY3-003 |
| Batch/Serial Number | 16901-ZY3-003 |
| Part Type | Aftermarket Replacement |
| Engine Type | 4-stroke outboard |
| Application | Fuel supply system (low pressure) |
| Dimensions (Height x Diameter x Inner Diameter) | 34mm x 44mm x 12mm |
5. Installation (Setup)
Follow these steps for proper installation of the fuel filter element:
- Before First Use: Remove all protective films or packaging from the filter element.
- Ensure the engine is completely shut off and the fuel system is depressurized.
- Remove the old filter element and thoroughly clean the filter housing.
- Install the new 16901-ZY3-003 element, ensuring proper seating of the seals.
- Secure the housing and check for any fuel leaks before starting the engine.
6. Maintenance
- Inspection: Check the filter every 100 hours of operation.
- Replacement: It is recommended to perform a planned replacement once per season for stable engine operation, especially when using varying fuel qualities.
- Storage: Keep the filter in a dry place and away from children.
7. Troubleshooting
No specific troubleshooting steps are provided for this product. If you experience issues after installation, please re-verify all installation steps and ensure the filter is correctly seated and sealed. Consult a qualified marine mechanic if problems persist.
8. User Tips
No specific user tips were available from customer reviews or Q&A for this product at this time.
9. Warranty & Support
Manufacturer Information:
Manufacturer: Zhejiang Huzhou Yagang Yacht Equipment Co., Ltd., Huzhou, Zhejiang, China.
Email: 1721805358@qq.com
EU Authorized Representative & Importer:
Name: MJCM SARL
Address: 78 avenue des Champs Elysees Bureau 326, PARIS, France.
Email: mjcm190928@gmail.com
Tel: +33-767213611
Compliance Information:
This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers must assess which requirements and regulations apply based on the actual product type, function, and destination market.
A PDF version of the user manual is available for download: View User Manual (PDF)