I. Warning & Safety Information
- Sharp Edges: Wear protective gloves when installing or replacing wiper blades to prevent injury.
- Dry Operation: Do not operate wiper blades at high speed on dry glass surfaces, as this can cause damage to the wiper blades and windshield.
- Wiper Arm Handling: Do not pull the wiper arm directly with your hands, as this may cause breakage.
II. Product Overview
This manual provides instructions for the VENDY Windshield Wiper Blades, designed for automotive windshields.
- Brand: VENDY (also referred to as LECIBUBI in some documentation)
- Model Compatibility: Acura RDX (TB1/TB2/TB3/TB4) 2007-2018
- Placement: Front & Rear Windshield
- Material: High-grade natural rubber with double carbon steel bar and memory elastic steel sheet.
- Color: Black

Image: VENDY Windshield Wiper Blades installed on an Acura RDX.
III. Setup & Installation
These wiper blades are designed for easy and quick installation, providing a perfect fit without the need for awkward adapters. They are suitable for left-hand drive vehicles.
Installation Steps:
- Lift the wiper arm away from the windshield.
- Remove the old wiper blade from the arm.
- Align the mounting clip of the new VENDY wiper blade with the wiper arm.
- Gently press the new wiper blade into place until it clicks securely.
- Carefully lower the wiper arm back onto the windshield.
Video: Demonstration of front and rear windshield wiper installation and operation.

Image: Visual step-by-step guide for installing wiper blades.
Wiper Interface Types:
The VENDY wiper blades are designed with a special vehicle interface to ensure compatibility with various car models. Refer to the diagram below for common adaptation interfaces.

Image: Different types of wiper blade adaptation interfaces for various vehicles.
IV. Operating Instructions
The VENDY wiper blades feature an intelligent boneless design with tension memory, applying even pressure along the entire blade length for a smooth, clean, and chatter-free wipe. Their aerodynamic design significantly reduces drag, noise, and wind lift.
Key Features during Operation:
- High Cleaning Efficiency: Effectively removes rainwater and dirt for clear visibility.
- Silent Operation: Designed for quiet performance without abnormal noise.
- Traceless Wiping: The double carbon steel bar and high-precision curvature ensure a traceless wipe.

Image: Comparison showing clear visibility with VENDY wipers versus vague visibility with worn wipers.

Image: Silent operation of VENDY wiper blades, showing noise levels from 0 dB (very quiet) to 60 dB (bit noisy).

Image: Detail of the double carbon steel bar and traceless wiping feature.

Image: VENDY wiper blade providing clear visibility during rain.
V. Maintenance
Recommended Replacement Interval:
- Replace wiper blades every 6-12 months, or immediately if you notice skipping, abnormal noise, or streaking.
Cleaning Method:
- Wipe the rubber strip with a soft cloth dampened with a neutral detergent.
- Do not use gasoline or alcohol, as these can damage the rubber.
- Do not wipe the rubber strip with corrosive cleaning agents.
Ice Removal:
- If ice forms on the windshield or wiper blades after use, remove the ice layer before operating the wipers.
Storage Conditions:
- Store wiper blades in a cool, dry place.
- Keep away from direct sunlight and high-temperature environments (above 70°C / 158°F).
- When not in use for extended periods, cover the blades with a protective sleeve to prolong their lifespan.
Precautions:
- Wiper blades are not suitable for non-glass surfaces.
- When replacing, always select the original equipment manufacturer (OEM) specification and model to ensure proper fit and performance.
VI. Troubleshooting (Frequently Asked Questions)
Wiper Skipping:
- Possible Causes: Rubber strip aging or an oily film on the glass.
- Solution: Clean the windshield thoroughly with a glass cleaner to remove any oily film. If the rubber is aged, consider replacing the wiper blades.
Excessive Noise:
- Possible Causes: Foreign objects trapped under the blade or rubber strip deformation.
- Solution: Inspect the wiper blades and windshield for any debris or foreign objects and remove them. Check the rubber strip for any signs of deformation or damage; replace if necessary.
VII. Specifications
| Feature | Description |
|---|---|
| Product Name | Upgraded Intelligent Boneless Wiper |
| Material | High-grade natural rubber, double carbon steel bar, memory elastic steel sheet |
| Temperature Tolerance | +158℉ to -40℉ (-40℃ to +70℃) |
| Lifespan | 1 Million Times of Wiping |
| Interface | Special Vehicle Interface |
| Design | Aerodynamic design, prevents ice and snow build-up |
| Color | Black |
| Compatibility | Acura RDX (TB1/TB2/TB3/TB4) 2007-2018 (Left-hand drive vehicles only) |
Wiper Size Chart:

Image: Detailed table of available wiper blade sizes in inches and millimeters.
Product Dimensions (Approximate Package Size):
- Length: 50 cm
- Width: 27 cm
- Height: 8 cm
- Weight: 0.364 kg

Image: Exploded view of the aerodynamic wiper blade components.
VIII. User Tips
- Model Year Verification: Always confirm the exact model and year of your vehicle (e.g., Acura RDX 2007-2018) to ensure a perfect fit for your new wiper blades.
- Regular Cleaning: Periodically clean your windshield and wiper blades to maintain optimal performance and prevent streaking or noise.
IX. Warranty & Support
CE Marking:
This product bears the CE marking, indicating compliance with the essential requirements of relevant EU directives, such as safety, hygiene, and environmental protection, for products entering the European market.
Additional Resources:
For more detailed information, you may refer to the official user manual PDF: View User Manual (PDF)