YiFanHeRong USB 3.0 Mini Video Capture Card

Contents

HD 1080P 4K HDMI-compatible Micro USB Video Capture Card User Manual

Model: USB 3.0 Mini Video Capture Card | Brand: YiFanHeRong

Introduction

This USB 3.0 capture card is designed to capture both HDMI-compatible video and audio simultaneously. It transfers the captured content to a computer or smartphone for preview and storage. This device is ideal for high-definition acquisition, teaching recording, medical imaging, live broadcasting, video conferencing, and game recording.

Package Contents

  • 1x Audio Video Capture Card

Note: The product does not include a retail package but is securely packed for shipping. Please allow for minor measurement discrepancies (0-1cm). Product color may vary slightly due to monitor differences.

Product Overview

The capture card features an HDMI input port and a USB 3.0 output connector. It is compact and does not require an external power supply.

Blue USB 3.0 HDMI Video Capture Card with Input and Output labels
Figure 1: Front view of the USB 3.0 HDMI Video Capture Card, showing 'Input' and 'Output' labels.
Side view of the capture card showing HDMI input port and USB 3.0 connector
Figure 2: Side view illustrating the HDMI input port and the integrated USB 3.0 connector.
Back view of the capture card showing regulatory markings
Figure 3: Back view of the capture card, displaying regulatory compliance markings (FC, CE, RoHS) and 'Made in China'.

Setup

System Requirements

Ensure your computer meets the following minimum specifications for optimal performance:

  • CPU: Desktop computer i5-3400 or above; Notebook computer i7-3537u2.0 GHZ or above
  • Graphics Card: Desktop NVIDIA GT630 or above; Laptop NVIDIA GT735M or above
  • Memory: 4GB RAM
  • Operating System: Windows, Android, Mac OS. For Windows versions earlier than Windows 7, a driver installation may be required.

Connection Guide

  1. Connect your HDMI source (e.g., camera, game console) to the HDMI input port of the capture card.
  2. Connect the USB 3.0 connector of the capture card to an available USB 3.0 port on your computer or smartphone.
  3. The device is plug-and-play and complies with USB video UVC and USB audio UAC specifications, meaning no additional drivers are typically needed for supported operating systems.
Diagram showing HDMI source connected to capture card, then to computer via USB 3.0
Figure 4: Connection diagram for the video capture card, illustrating HDMI input from a source and USB 3.0 output to a computer for various applications.

Operating Instructions

To use the capture card, you will need compatible acquisition software installed on your recording device (computer or smartphone). Popular options include VLC, OBS (Open Broadcaster Software), and Amcap.

  1. Install Software: If you don't have one, download and install a video capture software. For OBS, you can find it at https://obsproject.com/.
  2. Launch Software: Open your chosen video capture software.
  3. Select Device: In the software settings, add a new video source and select the USB 3.0 Video Capture Card. You may also need to select the audio input device.
  4. Configure Settings: Adjust resolution, frame rate, and other settings as needed within the software. The card supports up to 3840x2160@60Hz input and 1920x1080@60Hz output.
  5. Start Recording/Streaming: Begin your recording or live stream through the software interface.

Specifications

Feature Detail
Maximum Input Resolution 3840x2160@60Hz
Maximum Output Resolution 1920x1080@60Hz
Video Input Format 8/10/12 bit color depth
Video Output Mode YUV, JPEG
Audio Format L-PCM
Input Cable Length (AWG26 Standard) ≤15 meters (for 1080P and below)
Maximum Working Current 0.4A/5VDC
Operating Temperature Range -10 to +55°C
Compliance USB video UVC, USB audio UAC, CE

Troubleshooting

  • No Signal: Ensure all HDMI and USB cables are securely connected. Verify that your HDMI source is powered on and outputting a signal. Check your capture software settings to ensure the correct video input device is selected.
  • Poor Video Quality/Lag: Ensure your computer meets the recommended hardware requirements. Use a high-quality AWG26 standard HDMI cable, especially for longer distances. Confirm you are using a USB 3.0 port on your computer.
  • No Audio: Check your capture software settings to ensure the correct audio input device is selected. Verify that the audio is enabled on your HDMI source.
  • Device Not Recognized: Try connecting the capture card to a different USB port. Restart your computer. If using an older Windows OS (pre-Windows 7), ensure necessary drivers are installed.

Maintenance

  • Keep the device in a dry environment and avoid exposure to extreme temperatures.
  • Clean the device with a soft, dry cloth. Do not use liquid cleaners or solvents.
  • Avoid dropping or subjecting the device to strong impacts.

User Tips

  • For best results, always use a USB 3.0 port on your computer to ensure maximum data transfer speed and prevent bottlenecks.
  • Experiment with different capture software settings (e.g., bitrate, encoder) to find the optimal balance between quality and file size for your specific needs.
  • When recording or streaming, close unnecessary applications on your computer to free up system resources and improve performance.

Warranty and Support

For detailed warranty information and further technical support, please refer to the official user manual PDF available at the following link:

View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.