1. Introduction
Thank you for choosing the Erilles Mini Camera MD21. This compact and versatile camera is designed for various applications, including home security, office monitoring, outdoor activities, and aerial recording. It features 1080P HD video recording, infrared night vision, motion detection, and a magnetic design for easy placement.

This manual provides detailed instructions on how to set up, operate, and maintain your camera. Please read it carefully before use to ensure optimal performance and longevity of your device.
2. Safety Warnings and Disclaimer
- The usage of this device is subject to relevant national laws and regulations. DO NOT use this product for any illegal activities.
- DO NOT point the camera lens directly at sunlight, as this may cause permanent damage.
- Keep away from fire. Never expose the device to any fire source.
- DO NOT disassemble or modify the device. Doing so causes the risk of electric shock, burn injury, and other health-related hazards.
- DO NOT let water, liquids, or foreign matter get inside the device. Extra precaution is advised where it is raining, snowing, near the ocean, or other forms of water. In case any of these symptoms are present, turn off the device immediately and contact support.
- DO NOT drop the device, as permanent damage may occur.
3. Product Overview
Familiarize yourself with the components of your Mini Camera MD21:

- Power Button
- M-Mode Button
- Rope hole
- LED Indicator
- TF Card Slot
- USB Port
- Reset Button
- IR-Infrared Night Vision Light
- Lens
4. Package Contents
Upon opening the package, please ensure all the following items are included:

- 1 x Erilles Mini Camera MD21
- 1 x Rear Clamp
- 1 x Base Mount
- 1 x DV Bracket
- 1 x Lanyard
- 1 x Sports Belt (Wristband)
- 1 x Thimble (Reset Pin)
- 1 x Data Cable (USB)
- 1 x User Manual
Note: The camera body does not have internal memory. A TF (MicroSD) card (8GB-32GB FAT32 recommended) is required for recording and storage. Memory cards are sold separately unless purchased as a bundle.
5. Setup
5.1. TF Card Insertion
Before using the device, you must insert a TF (MicroSD) card. The card must be formatted to FAT32 (not NTFS) and can range from 8GB to 32GB. If no memory card is inserted, the red light will automatically turn off after 5 seconds, and the device will automatically shut down after 1 minute of no operation.

Correct Insertion: Insert the TF card positively downward, along the side of the TF socket.
Incorrect Insertion: Do not insert the TF card into the middle part of the TF socket. If the TF card falls into the machine, unscrew the top screw with a screwdriver to retrieve it.
5.2. Charging the Battery
The camera has a built-in rechargeable lithium battery. When the battery is low, connect the device to a 5V-1A charger using the provided USB cable. During charging, both red and blue lights will flash. Once fully charged, the lights will remain steadily on.

5.3. Mounting Options
The camera offers various mounting options due to its magnetic back and included accessories:

- Magnetic: Attach directly to metal surfaces.
- Bracket: Use the included bracket for desktop or other flat surface placement.
- Wall Mounted: Utilize the wall mount accessory for fixed installations.
- Universal Clip: Attach the camera to clothing or other objects for portable use.
- Wristband: The included wristband allows for wearing the camera, ideal for sports or action recording.

6. Operating Modes
The following operations assume a TF card is correctly inserted.
6.1. Power On/Off
- Power On: Press the Power Button (1) for 2 seconds. The red light will turn on, indicating standby mode.
- Power Off: Press the Power Button (1) for 5 seconds.
6.2. Video Recording
- Start Recording: From standby mode (red light on), click the Power Button (1) once. The red indicator will flash 2 times and then go off, indicating the device has entered video recording mode.
- Save & Stop Recording: While recording, click the Power Button (1) once. The red indicator will turn on, and the device will return to standby mode.
- Loop Recording: The camera supports loop recording, with each segment lasting approximately 5 minutes.

6.3. Motion Detection Mode
- Activate Motion Detection: After powering on (red light on, standby mode), click the M-Mode Button (2) once. Both red and blue lights will turn on, and the device enters motion detection mode.
- Start Detecting: In motion detection mode, click the Power Button (1) once. The red light will turn on, the blue light will flash, and the device is in the detecting state.
- Recording: Once motion is detected, both indicators will go off, and recording will begin for 2 minutes. If no further motion is detected, the red light will turn on, and the blue light will flash again, returning to the detecting state.
- Exit Motion Detection: Click the Power Button (1) once to stop recording and save the video. The device will return to standby mode, with both red and blue lights on.

6.4. Photo Mode
- Activate Photo Mode: After powering on (red light on, standby mode), click the M-Mode Button (2) twice. The red light will go off, and the blue light will turn on, indicating photo mode.
- Take a Photo: In photo mode, click the Power Button (1) once. The blue light will flash once to capture and save a picture.
- Continuous Photos: To take more pictures, click the Power Button (1) again for each photo.
6.5. Infrared Night Vision Lights Switch
- Turn On: In any mode after powering on, press the Power Button (1) for 2 seconds and release. The blue light will flash 2 times, and the infrared night lights will turn on.
- Turn Off: In any mode, press the Power Button (1) for about 2 seconds and release. The blue light will flash 4 times, and the infrared night vision function will turn off.
6.6. Record with Charging
When the device is off, connect it to a power source (charger or power bank). Both red and blue lights will flash simultaneously, indicating the device is charging. Then, click the Power Button (1) once. The red light will flash three times and then enter recording mode. Press the Power Button (1) again to exit recording and save it.
Note: The device cannot enter video mode when connected to a computer.
7. Time Setting
To set the time and date watermark on your recordings:
- Upon power on, the device will automatically generate a file named "TIMERSET.TXT" on the TF card.
- Turn off the device and connect it to a computer using the USB cable.
- Locate the "TIMERSET.TXT" file on the camera's storage.
- Open the file and set the desired time using the format:
YYYYMMDDHHMMSS Y(e.g.,20221201192526 Yfor December 1, 2022, 19:25:26 with watermark display). - To disable the time display, change 'Y' to 'N' (e.g.,
20221201192526 N). - Save the file.
- Disconnect the device from the computer, then turn on the device. The time setting is now complete.

8. Maintenance
- Keep the camera clean by gently wiping it with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive cleaners.
- Store the camera in a cool, dry place away from direct sunlight and extreme temperatures.
- Ensure the lens is free from dust and smudges for clear recordings.
9. Troubleshooting
9.1. Resetting the Device
In case of system error or malfunctioning, you can reset the device by inserting a pin into the reset hole (7).
9.2. Common Issues
- Camera not turning on: Ensure the battery is charged. If fully charged, try resetting the device.
- Recording not saving: Check if a TF card is inserted correctly and formatted to FAT32. Ensure there is sufficient storage space.
- Device automatically shuts down: This can happen if no TF card is inserted or if there is no operation for 1 minute after booting.
- Cannot enter video mode when connected to computer: This is normal behavior. Disconnect from the computer to operate the camera in video mode.
10. Specifications
| Feature | Detail |
|---|---|
| Video Format | AVI |
| Video Coding | M-JPEG |
| Video Resolution | 1920*1080P (Full-HD) |
| Video Frame Rate | 30fps |
| Photo Resolution | 4032*3024 |
| Picture Format | JPG |
| Motion Detection Record | Support |
| Battery Capacity | About 170mAh |
| Record Time | About 60 minutes |
| Charging Time | 2 hours |
| Charge Voltage | DC-5V 1A |
| Storage Support | 8GB-32GB FAT32 |
| Transmission Speed | USB 2.0 |
| Interface Type | Mini 8PIN USB |
| Camera Stabilization | None |
| Sensor Technology | CMOS |
| View Angle | 140 Degrees Super Wide Angle |

11. User Tips
No specific user tips were available from the provided customer reviews or Q&A data.
12. Warranty and Support
For any issues, questions, or support needs, please refer to the official user manual PDF or contact the seller directly.
Official User Manual (PDF): Download PDF Manual
Please note that misuse or unauthorized modification of the product may void your warranty.