SAMZHE XP-160

Contents

SAMZHE 12 in 1 Network Tool Kit User Manual

Model: XP-160

Brand: SAMZHE

1. Product Overview

This SAMZHE multi-function crimping tool is a professional-grade network cable crimping tool, designed for crimping, cutting, and stripping RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C/6P2C) crystal heads. It is suitable for Cat5, Cat5e, Cat6, Cat6a network cables, telephone lines, and other communication cables, ideal for network installation, maintenance, and home wiring scenarios.

Video: Overview of the SAMZHE Network Tool Kit contents and features.

2. Package Contents

The SAMZHE Network Tool Kit includes the following items:

  • 1 × SAMZHE multi-function crimping tool
  • 1 × Wire stripper
  • 1 × Cable cutter
  • 1 × Category 6 network cable
  • 1 × Type-C charging cable
  • 1 × Cable punch-down tool
  • 40 × Nylon cable ties
  • 20 × Protective sleeves
  • 20 × Cat 5e RJ45 connectors
  • 20 × Cat 6 RJ45 connectors
  • 1 × Transmitter (for cable tester)
  • 1 × Alligator clip
  • 1 × Receiver (for cable tester)
  • 2 × Replacement cutting blades
  • 1 × User manual (this document)
Diagram showing all components included in the SAMZHE Network Tool Kit, neatly organized in a carrying case.

Image: Detailed view of the network tool kit contents, including crimper, tester, wire stripper, cable ties, and connectors.

3. Key Features

  • 3-in-1 Multi-function: Integrates crimping, wire stripping, and wire cutting functions, meeting all network cable production needs.
  • Wide Compatibility: Supports RJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C/6P2C) crystal heads, compatible with Cat5/Cat5e/Cat6/Cat6a network cables and telephone lines.
  • Durable Material: Made of high-hardness carbon steel, with anti-rust and wear-resistant treatment, ensuring long service life.
  • Ergonomic Design: Features a non-slip rubber handle and labor-saving lever structure to reduce hand fatigue during long-term use.
  • Replaceable Blades: Equipped with 2 spare blades for easy replacement, ensuring long-term sharp cutting performance.
  • Safe & Reliable: Built-in positioning structure ensures accurate crimping, preventing poor contact or crystal head damage.
  • Wire Tracing and Testing: Quickly locate target cables and identify wire sequences with the included cable tester.
  • Industrial-Grade Electronic Pliers: Ideal for cutting electronic components, soft copper wires, and injection-molded flash.
  • Engineering-Grade Wire-Stripping Knife: Precisely strips network modules in one smooth motion, with a 40Cr industrial-grade high carbon steel cutting head and blade storage compartment.
  • Innovative Locking Design: Sturdy snap-button design prevents tools from falling out during transport.
  • Crystal Connector Protective Cover: High-quality, eco-friendly material with dustproof design, suitable for network cables with an outer diameter of <=8.0mm, shielding cables from compression.

4. Setup and Operation

4.1 Prepare Tools & Materials

  • SAMZHE crimping tool
  • Network/telephone cable (Cat5/Cat5e/Cat6/Cat6a, etc.)
  • Corresponding crystal head (RJ45/RJ12/RJ11)
  • Wire stripper (optional, the crimping tool has a built-in stripping function)

4.2 Step 1: Strip the Cable Insulation

  1. Insert the end of the network cable into the wire stripping slot of the tool (located near the crimping die).
  2. Hold the handle tightly and rotate the tool 1-2 times to cut through the outer insulation.
  3. Pull out the cable, remove the cut insulation layer, exposing the 4 pairs of twisted wires inside (about 1.5cm-2cm is appropriate).
Four-step diagram showing how to use the wire stripper: 1. Adjust blade depth, 2. Strip cable jacket, 3. Cut the cable, 4. Job complete.

Image: Instructions for using the wire stripper, detailing blade adjustment, stripping, and cutting.

4.3 Step 2: Arrange the Wires

  1. Untwist the 4 pairs of twisted wires and arrange them in the standard line sequence.
    • T568B (most commonly used): White-Orange, Orange, White-Green, Blue, White-Blue, Green, White-Brown, Brown.
    • T568A (for cross cables): White-Green, Green, White-Orange, Blue, White-Blue, Orange, White-Brown, Brown.
  2. Straighten the wires, cut the end flat with the cutting slot of the tool, keeping the length of the exposed wires about 1.2cm-1.5cm (ensure the wires can be fully inserted into the crystal head).
Diagram of standard Ethernet cable wiring for T568A and T568B, showing the color code sequence for each pin.

Image: Wiring diagrams for T568A and T568B standards, illustrating the correct color sequence for Ethernet cable termination.

4.4 Step 3: Insert the Wires into the Crystal Head

  1. Insert the arranged wires into the crystal head (RJ45/RJ12/RJ11, match the model), ensuring each wire is inserted to the end of the crystal head and the copper contacts are in contact with the wires.
  2. Check that the outer insulation of the cable enters the crystal head by about 0.5cm to avoid loose wires.

4.5 Step 4: Crimp the Crystal Head

  1. Select the corresponding crimping die slot (8P for RJ45, 6P for RJ12/RJ11).
  2. Insert the crystal head with the cable into the die slot, ensuring the crystal head is fully seated.
  3. Hold the handle tightly with both hands until the two handles are closed completely. The copper contacts of the crystal head will be pressed into the wires to form a firm connection.
  4. Release the handle, take out the crimped network cable, and complete the production.
Detailed diagram of the all-in-one network cable crimping tool, highlighting RJ45 and RJ11 crimping interfaces, crimp switching screw, release lock button, anti-slip texture, wire stripping port, non-slip handle, dovetail clamp crimping interface, wire stripping blade, and alloy carbon steel material.

Image: Anatomy of the crimping tool, showing interfaces for RJ45 and RJ11, wire stripping features, and ergonomic design elements.

4.6 Step 5: Test the Cable (Optional)

Use a network cable tester to test the connectivity of the crimped cable. Ensure all 8 wires are connected normally, with no open circuit or short circuit.

Image showing the network cable tester in use, with a person holding the receiver unit and the transmitter connected to a coiled network cable, indicating wire tracing and testing functionality.

Image: Demonstration of the cable tester, illustrating how to trace and test network cables for proper connectivity.

5. Maintenance & Storage

  • After use, wipe the tool with a clean cloth to remove dust and oil stains.
  • Store in a dry, cool place, away from moisture and rust.
  • Regularly check the tightness of screws and the sharpness of blades. Replace accessories as needed.

5.1 Blade Replacement Guide

  1. Use a screwdriver to loosen the fixing screws of the blade on the tool.
  2. Take out the old blade and insert the new replacement blade into the slot, aligning its position.
  3. Tighten the fixing screws, ensuring the blade is fixed firmly without looseness.

Note: Be careful of the sharp blade during replacement to avoid cutting your hands.

6. Troubleshooting

ProblemPossible CauseSolution
Poor cable connection, network disconnectionWires not inserted to the end of the crystal head; crimping not in place; line sequence wrongRe-arrange the line sequence, reinsert the wires, re-crimp firmly
Blade not sharp, difficult to cut wireBlade worn; blade looseReplace the new blade; tighten the fixing screw
Crystal head deformed after crimpingWrong die slot selected; excessive forceSelect the correct die slot (8P/6P); use moderate force
Cable insulation not cut throughInsulation too thick; blade wornAdjust the stripping position; replace the new blade

7. Product Specifications

ItemParameter
BrandSAMZHE
NameNetwork Tool Kit Set
ModelXP-160
ColorBlack + Blue
MaterialHigh-hardness carbon steel + non-slip rubber handle
Applicable Crystal HeadsRJ45 (8P8C), RJ12 (6P6C), RJ11 (6P4C/6P2C)
Applicable CablesCat5, Cat5e, Cat6, Cat6a network cables, telephone lines
WeightAbout 350g
Package Size22 × 10 × 3cm
Product specifications diagram showing the dimensions of the carrying case: 255mm length, 75mm width, 225mm height.

Image: Product dimensions of the carrying case.

8. Warranty & Support

  • This product supports a 12-month quality warranty.
  • If there is any quality problem, please contact our customer service for replacement or refund.
  • For any questions during use, please contact us through the AliExpress store. We will reply within 24 hours.

9. User Tips

  • The provided manual is specifically for SAMZHE series multi-function crimping tools.
  • For more advanced network wiring skills and tips, consider following the official SAMZHE store.
  • The case is designed to securely hold tools, preventing movement even when shaken, ensuring all components stay organized.
  • The crimping tool is versatile and easy to operate, making it suitable for both beginners and experienced users.
  • The industrial-grade electronic pliers are useful for precise cutting of various materials, including electronic components and soft copper wires.
  • The wire stripper is multi-functional and adjustable for different cable types, enhancing its utility.
  • The kit includes Cat5e/6 crystal connectors to help boost internet speed and ensure reliable connections.
  • The thickened outer shell of the case is drop-resistant and shatter-proof, ensuring durability and protection for your tools.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.