Tuya Smart Circuit Breaker

Contents

Tuya WiFi & RF433 Smart Circuit Breaker User Manual

Model: Smart Circuit Breaker

Your guide to smart home automation with seamless control.

1. Introduction

The Tuya WiFi & RF433 Smart Circuit Breaker offers advanced control over your lighting and appliances. Featuring both WiFi and RF433MHz connectivity, it integrates with popular smart home platforms like Amazon Alexa and Google Assistant for voice control. The wireless switches are designed for easy installation and include a glow-in-the-dark button for convenience. This manual provides detailed instructions for installation, setup, operation, and troubleshooting.

Tuya WiFi & RF433 Smart Circuit Breaker with compatibility logos and wiring diagram
Overview of the Tuya Smart Circuit Breaker system, showing the controller and wireless switches, compatible with Tuya, Smart Life, WiFi, 433MHz, Amazon Alexa, Google Assistant, and Yandex Alice.

2. Safety Information

Please read and understand all safety instructions before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Always turn off the power at the circuit breaker before performing any electrical work.
  • Installation should be performed by a qualified electrician or in accordance with local electrical codes.
  • Do not operate the device with wet hands.
  • Ensure the product is used within its specified voltage and load limits.
  • Keep the device away from water and high humidity environments.
  • Do not attempt to repair or modify the device yourself. Contact support for assistance.

3. Package Contents

The package typically includes:

  • Smart Circuit Breaker Controller (Receiver)
  • Wireless Switch(es) (e.g., 1-gang, 2-gang, 3-gang, or receiver only)
  • Mounting screws and/or double-sided adhesive tape
  • User Manual (this document, also available as a PDF: View PDF Manual)

4. Technical Specifications

Controller (Receiver)

FeatureSpecification
Working VoltageAC85-265V 50HZ/60HZ
Wi-Fi StandardIEEE 802.11 b/g/n 2.4GHz
Working Frequency433MHZ
Power Consumption (Standby)<0.3W
Total Load Power<1000W
Maximum Current10A
Receiving Sensitivity-108dBM
Control Distance20-100 meters (Open region)
Coding WayLearning Code
ModulationASK
Operating Temperature-10°C ~ +70°C
Dimensions67mm x 41.2mm x 25.7mm (2.64in x 1.62in x 1.01in)

Wireless Switch

FeatureSpecification
Working VoltageDC 12V
Working Frequency433.92MHZ
Power Consumption (Standby)<1uA
Transmitter Power<10mW
Control Distance<100M (Indoor distance)
Operating Temperature-10°C ~ +70°C
Battery Standard12V 27A Battery
Dimensions86mm x 86mm x 15mm (3.39in x 3.39in x 0.51in)
Dimensions and specifications for the wireless switch
Wireless switch dimensions and key specifications.
Detailed product parameters for the controller (receiver)
Detailed product parameters for the controller (receiver).

5. Installation Guide

5.1 Controller (Receiver) Installation

  1. Wiring: Connect the controller in series with the circuit of the lamp. Connect the live wire to 'L-in' and the neutral wire to 'N-in'. The output live wire connects to 'L-out' and the output neutral wire connects to 'N-out' (lamp end).
  2. Mounting: After connecting the controller, it can be fixed in the appropriate position using the supplied double-sided tape or screw package.
Wiring diagram for the smart circuit breaker controller
Controller Connection Method: Ensure 'L-in' and 'N-in' are connected to the power source, and 'L-out' and 'N-out' are connected to the light. Input and output cannot be reversed to avoid damage.

5.2 Wireless Switch Installation

  1. Battery Installation (for remote control switch):
    • Open the cover of the remote control switch.
    • Install the CR2032 button battery into the battery compartment, paying attention to the positive and negative directions.
    • Close the cover.
  2. Battery Installation (for touch switch):
    • Use a flat-blade screwdriver to gently pry open the battery compartment slot.
    • Insert the CR2032 button battery, ensuring correct polarity (negative electrode towards the panel, positive electrode towards the backplane).
    • Reinstall the battery compartment into the switch.
  3. Placement: The wireless switch can be placed in any desired position using screws or double-sided adhesive tape. Common placements include holding it in hand, on a glass door, or at the bedside.
Wireless switch with 27A 12V battery for long life
The wireless switch uses a 27A 12V battery, designed for long life.
Wireless switch placement options and installation methods
Wireless switch can be placed anywhere using screws or double-sided tape.
Simple installation and usage diagram across multiple rooms
Example of simple installation and flexible placement in a home environment.

6. App Setup and Network Configuration

6.1 Download the App

Scan the QR code below or search for "Smart Life" or "Tuya Smart" in your app store to download the application.

QR codes for Smart Life and Tuya Smart apps
Scan to download the Smart Life or Tuya Smart app.

6.2 Add Device via App

Ensure the controller is powered on after installation is complete.

  1. Open the App and tap the "+" icon in the upper right corner to enter the network connection page.
  2. The App offers two network connection methods: Normal Mode (default) and AP Mode. You can switch between modes by tapping the upper right corner.
  3. For Normal Mode, ensure the device's indicator light rapidly flashes (2 times per second). If it's not flashing rapidly, press the receiver's button for 5 seconds or power the device on/off three times until it flashes rapidly.
  4. Follow the on-screen prompts to complete the device naming and setup.

7. Pairing and Clearing Mode

The product is typically pre-paired at the factory. If re-pairing or clearing is needed, follow these steps:

7.1 Code Pairing (Manual Pairing)

  1. Press the controller's pairing key 2 times. The LED indicator will flash, indicating it has entered pairing mode.
  2. Within 5 seconds, press the remote control switch 2 times.
  3. The light connected to the controller should respond, indicating successful pairing.

7.2 Clearing Mode (Manual Code Clearing)

  1. Press the controller's pairing key 8 times.
  2. The LED indicator will flash, confirming that the code has been successfully cleared.
Instructions for pairing and clearing mode for the smart circuit breaker
Visual guide for pairing and clearing the controller with the wireless switch.

8. Operating Instructions

8.1 App Remote Control

Once connected to the app (Smart Life or Tuya Smart), you can turn devices on/off by tapping their icons in the app. The device status is always displayed in real-time.

App remote control demonstration in an outdoor setting
Control your home switches remotely using the Tuya app, even when outside.

8.2 Voice Control

The device is compatible with smart home platforms like Amazon Alexa and Google Assistant. Link your Tuya/Smart Life account to your voice assistant app to enable voice commands.

  • Example Commands:
    • "Google, turn on the living room light."
    • "Alexa, turn off the balcony lamp."
Voice control compatibility with Google Assistant, Amazon Alexa, and Yandex Alice
The smart circuit breaker supports voice control via Google Assistant, Amazon Alexa, and Yandex Alice.

8.3 Timing and Scheduling

Use the app to set up various timing functions:

  • Timing: Set a specific time for the device to turn on or off once.
  • Cycle: Schedule repetitive on/off cycles (e.g., turn on at 07:00 AM every day).
  • Countdown: Set a countdown timer for the device to turn off after a specified duration.
Timing, countdown, and scheduling features in the app
Set up timing, countdown, and schedules for automated control via the app.

8.4 Multi-Group Linkage and Smart Scenes

  • Group Control: Organize multiple devices into groups to control them simultaneously within the app.
  • Smart Scenes: Create automated scenarios where devices trigger or turn off based on specific conditions (e.g., turn on lights when you arrive home).
  • Shared Control: Share device control with other "Smart Life" accounts. Both accounts must be online to receive invitation messages.
Diagram showing multiple switches controlling one light and one switch controlling multiple lights
Flexible control options: several switches can control one light, or one switch can control several lights.
RF433MHz strong signal coverage across a house
The 433MHz strong signal allows for control across multiple rooms in a home.

8.5 Glow-in-the-Dark Feature

The wireless switch buttons feature fluorescence radiation, making them easy to locate and operate in the dark.

Glow-in-the-dark feature of the wireless switch buttons
The glow-in-the-dark buttons ensure easy visibility and operation at night.

9. User Tips

  • For optimal WiFi connectivity, ensure your router is 2.4GHz and the device is within a reasonable range.
  • Regularly check the battery level of your wireless switches to maintain consistent performance.
  • Experiment with different placement options for the wireless switches to find the most convenient locations.
  • Utilize the smart scene feature in the app to automate daily routines and enhance energy efficiency.

10. Troubleshooting

10.1 Device is "Offline" in the App after successful addition.

Solution: The newly added device needs a moment to connect to your router and the internet. If it remains offline for a long time, check the following:

  • The LED indicator flashes once and repeats quickly: This means the device cannot connect to the router. Verify your Wi-Fi password, and ensure the device is not too far from the router (weak Wi-Fi signal).
  • Ensure your router is 2.4GHz Wi-Fi, as 5GHz is not supported.
  • Check if your router's MAC filter is open to allow new devices.
  • If the device is still offline, close and re-open the app.

10.2 App cannot find the device during pairing.

Solution:

  • Turn off and then reconnect your mobile phone's WLAN.
  • Power cycle the device (turn off, then on) to re-enter network configuration state, then try reconnecting.

10.3 Device LED remains off, and button press does not respond.

Solution:

  • Confirm that the wiring is correct. Incorrect input/output connections can damage the circuit.
  • If wiring is correct, the circuit might be damaged. Contact the equipment vendor.

10.4 How to set the indicator light to flash quickly (for network configuration).

  1. Connect the device to power, turn off power after 10 seconds, then turn it on again.
  2. Long press the reset button for 5 seconds.
  3. Confirm the indicator light flashes quickly.

10.5 How to set the indicator light to flash slowly (for AP mode configuration).

  1. Connect the device to power, turn off power after 10 seconds, then turn it on again.
  2. Long press the reset button for 5 seconds until the indicator light flashes quickly.
  3. Long press the reset button again for 5 seconds until the indicator light flashes slowly.

11. Important Cautions

  • Always turn off power before operating or testing the device. Ensure all connections are correct before powering on.
  • Replace the remote control battery promptly when its voltage is low, as low battery can reduce the control distance.
  • When using wireless electronic products, avoid metal obstructions, large electronic devices, electromagnetic fields, and other strong interference sources to prevent signal disruption or failure.
  • Do not use this electronic product abnormally. Abnormal use can reduce performance, shorten product life, and may pose safety risks.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the IntelliHome Hub Store directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.