1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DIFANG 5K 4G AOV Solar PTZ Outdoor Security Camera. Please read this manual thoroughly before using the product to ensure proper functionality and safety.
Ideal Applications:
- Yard: Ideal for areas without power or internet; solar-powered for round-the-clock protection.
- Orchards: Prevents theft and pests; remotely monitors crop conditions.
- Ranches: Monitors livestock activity to prevent loss or theft.
- Fish Ponds: 24/7 monitoring to prevent illegal fishing.
- Parking Lots: No wiring required; flexible installation; monitors vehicle safety.
- Rural/Remote Areas: 4G connectivity; works even without Wi-Fi.
2. Safety Information
⚠️ Disclaimer:
Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
- Ensure the camera is installed in a location that complies with local privacy laws.
- Do not expose the camera to extreme temperatures or corrosive environments.
- Use only the specified power accessories.
- Keep out of reach of children.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.
- DIFANG 5K 4G AOV Solar PTZ Outdoor Security Camera
- Solar Panel (may be pre-attached)
- Mounting Bracket and Screws
- User Manual (this document, also available as PDF: User Manual PDF)
- (Optional) TF Card (depending on model variant)
4. Product Overview
The DIFANG 5K 4G AOV Solar PTZ Outdoor Security Camera features a dual-lens design, solar power, 4G connectivity, and advanced AI functions for comprehensive outdoor surveillance.
- Solar Panel: Converts sunlight into electrical energy to charge the built-in battery.
- Antenna: For stable 4G signal reception.
- Fixed Lens: Upper lens for wide-angle monitoring.
- PTZ Lens: Lower lens with Pan-Tilt-Zoom capabilities for dynamic surveillance.
- White Light & IR Light: Provides illumination for full-color night vision and infrared night vision.
- Charging Interface: For initial charging or supplementary power via a 5V2A power supply.
- ON/OFF Switch: Controls the power state of the camera.
- Card Slot & Reset Button: For inserting a TF card (up to 128GB) and performing a factory reset.
5. Specifications
| Feature | Specification |
|---|---|
| Resolution | 5K Ultra HD (5 MP) |
| Lens Quantity | Dual Lens |
| Lens (mm) | 2mm |
| Connectivity | 4G LTE |
| Power Mode | Solar + Built-in battery (No external power required) |
| Pan-Tilt Control | Horizontal 355°, Vertical 90° (Motorized) |
| AI Functions | Motion Detection, Human Detection, Auto-Tracking |
| Night Vision | Infrared Night Vision / Full-Color Night Vision |
| Color Night Vision | Yes |
| Audio | Two-Way Audio |
| Alarm Type | Human Detection + Audible/Visual Alarms + App Notifications |
| IP Rating | IP66 (Waterproof / Weatherproof) |
| Storage | TF Card (Supports up to 128GB) / Cloud Storage |
| Compatible Platforms | Android / iOS |
| Scene | Indoor and outdoor |
| Sensor | CMOS |
6. Setup Guide
6.1. Physical Installation
Choose a suitable location for your camera, ensuring the solar panel receives adequate sunlight and the camera has a clear view of the area to be monitored. The IP66 rating allows for outdoor installation in various weather conditions.
- Mount the camera securely using the provided bracket and screws.
- Adjust the solar panel angle to maximize sun exposure.
- Ensure the camera's ON/OFF switch is in the 'ON' position.
- If using a TF card for local storage, insert it into the card slot before mounting or ensure easy access.
- Insert a 4G LTE SIM card into the designated slot if 4G connectivity is desired.
6.2. App Download and Installation
The camera operates with the HiEasy APP.
- Scan the QR code below (refer to Figure 5, section 1) or search for "HiEasy" in your mobile application store (Android/iOS).
- Install the application on your smartphone.
6.3. Registration and Login
- Open the HiEasy APP.
- Click "New User Registration" and proceed to the next page.
- Choose your country code, then enter your mobile phone number or email.
- Follow the prompts to register after passing the verification code.
- Fill in your account and password information to log in.
6.4. Adding the 4G Camera to the APP
Ensure the camera is powered on and connected to the network (you should hear a voice prompt "connecting network successfully"). The blue light will flash, indicating the device is in wake-up status.
- Open the HiEasy APP.
- Click the "Add device" option (usually in the upper right corner or middle page).
- Scan the QR code located on the camera body.
- Once the device is added successfully, the blue light will turn solid.
7. Operating Instructions
7.1. Live Video View
After adding the camera, you can access the live video feed from the Home Page of the HiEasy APP.
- The dual-lens design allows simultaneous monitoring of two different areas.
- Use the controls within the app to switch views or manage settings.
7.2. PTZ Rotation Control
Control the Pan-Tilt-Zoom (PTZ) movement of the lower lens directly from the app.
- Pan: 355° horizontal rotation.
- Tilt: 90° vertical rotation.
- Use the directional controls in the app's live view interface.
7.3. Two-Way Audio
The built-in microphone and speaker allow for real-time two-way communication.
- Tap the microphone icon in the app to speak through the camera.
- The camera's speaker will output your voice.
7.4. Recording and Playback
The camera supports recording to a TF card (up to 128GB) or cloud storage (subscription may be required).
- Local Recording: Insert a TF card into the camera's card slot.
- Cloud Storage: Activate cloud storage services through the HiEasy APP (may require purchase).
- Playback: Access recorded video via the "Album" or "Recording Playback" section in the app.
7.5. Night Vision Modes
The camera offers both infrared and full-color night vision for clear monitoring in low-light conditions.
- Infrared Night Vision: Provides clear black and white images in complete darkness.
- Full-Color Night Vision: Utilizes white lights to provide color images at night. This can be configured in the app settings.
7.6. PIR Human Detection & Auto-Tracking
The camera uses Passive Infrared (PIR) technology to detect human movement, triggering recording and alarms.
- When human movement is detected, the camera wakes up from sleep mode and begins recording.
- The camera can automatically track the detected human target.
- Audible and visual alarms (smart floodlight) can be triggered, and app notifications sent to your smartphone.
7.7. Alarm Management
Configure alarm settings in the HiEasy APP:
- Alarm Sound: Enable and customize alarm sounds (type, volume, duration) when humans are detected.
- Alarm Flashing Light: Set the strobe light to activate upon human detection.
- Low Battery Alarm: Receive push notifications when the battery level is low.
- Power Off Alarm: Receive push notifications if the camera powers off unexpectedly.
7.8. Working Modes
The camera offers different working modes to optimize power consumption:
- LADV Mode: Device actively detects and records according to a set time interval.
- Low Power Mode: Device only works and records when moving objects are triggered.
- Power Saving Mode: Closes device detection and record function; only supports APP preview.
- Recording Trigger Duration (for low power mode only): Options include 5S/10S/15S.
7.9. Power Settings
Manage how the camera powers on and charges:
- Power Line Power Supply: Device will start up automatically when charging via power line.
- Solar Power Supply: Device will start up automatically when charging via solar panel.
- Use Only Battery: Device will not start up automatically when charging; it will only run on battery power.
7.10. Device Sharing
Share camera access with other users through the HiEasy APP:
- Click the "Share" icon in the home page to enter the sharing management page.
- Choose "Share menu".
- Fill in the mobile phone number or email address of the user you wish to share with.
- Alternatively, click "QR code" to share the device face-to-face.
- You can also "Copy Link" to send a sharing link or use "WeChat Sharing" for WeChat friends.
8. Maintenance
- Cleaning: Regularly clean the camera lens and solar panel with a soft, dry cloth to ensure optimal performance. Avoid abrasive cleaners.
- Battery Care: Ensure the solar panel is free from obstructions to allow for continuous charging. If the camera is stored for an extended period, ensure the battery is partially charged.
- Firmware Updates: Check the HiEasy APP periodically for firmware updates. Keeping your camera's firmware up-to-date ensures the latest features and security enhancements.
- Water Ingress: Strictly prohibit water ingress into the camera.
- Lens Protection: Make sure the lens part has no stains or other objects covering it.
- Sound Alarm Usage: Do not always keep the sound alarm open to prolong its lifespan.
9. Troubleshooting
| Problem | Solution |
|---|---|
| Cannot connect when adding device | First, ensure the device has enough 4G traffic. Then, long-press the device Reset button for 5 seconds. Wait for the voice prompt "reset successful", then try adding the device again. |
| Device is offline | Ensure the device has power, the 4G signal is strong, and 4G traffic is in normal condition. |
| Cannot receive notifications on smartphone | Check whether the notification function is enabled in the Message menu (Message -> Setting) within the app. Also check your phone's system notification settings for the HiEasy app. |
| No recording found during playback | Check if a TF card is installed and if it is damaged. Verify the device time and video playback time are correct. Ensure cloud storage is active if relying on it. |
| Real-time video is laggy | Check the 4G signal condition and try to ensure the 4G signal strength is above 1 bar. Check if the 4G signal is being interfered with. Try moving the device to another place with good 4G signal coverage. You can also try switching the device image definition to a lower setting. |
Indicator Light Explanation:
- Indicator light off: Camera is in sleep or shutdown state.
- Red light always on: Camera is starting.
- Blue light slow blinking: Camera is connecting to the network.
- Blue light always on: Camera is awake and connected to the network successfully.
- Red light slow blinking: Camera is waiting for APP scan for adding.
10. User Tips
- For optimal solar charging, ensure the solar panel is angled directly towards the sun for the longest possible duration each day.
- When installing, consider the field of view for both the fixed and PTZ lenses to maximize coverage.
- Regularly check the app for notifications and review recorded events to stay informed about your monitored area.
- If experiencing connectivity issues, try restarting the camera by turning it off and on, or by performing a soft reset via the app if available.
11. Warranty and Support
Your DIFANG 5K 4G AOV Solar PTZ Outdoor Security Camera comes with a 12-month warranty from the date of purchase. For warranty claims or technical support, please contact your retailer or the DIFANG customer service team.
For detailed warranty terms and conditions, please refer to the official user manual PDF: User Manual PDF.
The PDF includes a Warranty Card section for your records, detailing Product Model, Purchase Date, Fault Reason, Fault Handling, Customer Name, Distributor, Email, Phone, and Address.