Winlinte 4G0839015

Contents

Winlinte Rear Left Door Lock Latch Actuator

Model: 4G0839015 | Installation and User Manual

1. Important Safety Instructions

WARNING: Improper installation can lead to vehicle damage or personal injury. Professional installation is highly recommended.

  1. Park the vehicle on a flat, stable ground, apply the parking brake, and turn off the engine completely.
  2. For all electrical parts, disconnect the vehicle battery negative terminal first to avoid short circuit or electric shock.
  3. Wear personal protective equipment (safety gloves, eye protection) during installation to prevent physical injury.
  4. Do not modify, disassemble, or reprocess this product without authorization.
  5. Confirm the product is fully compatible with your vehicle model before installation. Incorrect fitment is not covered by warranty.

2. Product Overview

This manual provides instructions for the installation and use of the Winlinte Rear Left Door Lock Latch Actuator, designed as a direct replacement for OEM part numbers 4G0839015, 4G0839015A, and 4G0839015C.

Video 1: Product showcase of the Winlinte Rear Left Door Lock Latch Actuator, demonstrating its physical appearance from various angles.

Front view of the Winlinte Rear Left Door Lock Latch Actuator
Figure 1: Front view of the actuator.
Side view of the actuator showing the electrical connector
Figure 2: Side view showing the 9-pin electrical connector.
Bottom view of the actuator
Figure 3: Bottom view of the actuator.
Top view of the actuator
Figure 4: Top view of the actuator.

3. Setup and Installation

3.1 Tools Required

  • Standard wrench set
  • Screwdriver (Phillips and Flathead)
  • Jack (if needed for access)
  • Safety gloves
  • Voltage tester (for electrical parts)
  • Trim removal tools (to prevent damage to door panels)

3.2 Installation Procedure

  1. Prepare Vehicle: Park the vehicle on a flat, stable ground. Apply the parking brake and turn off the engine. Disconnect the vehicle battery's negative terminal.
  2. Remove Door Panel: Carefully remove the interior rear left door panel. Refer to your vehicle's service manual for specific instructions on door panel removal, as this varies by model. Disconnect any internal wiring connectors attached to the door panel.
  3. Detach Old Actuator: Unplug the old actuator's electrical plug. Detach any lock linkages connected to the actuator.
  4. Remove Old Actuator: Unscrew the mounting bolts securing the old actuator to the door frame. Carefully remove the old actuator from its position.
  5. Clean Area: Clean the installation area thoroughly. Check for wear, rust, or damage of mounting brackets and related parts. Ensure the mounting surface is flat and clean.
  6. Install New Actuator: Align the new actuator with the original mounting position. Fix it firmly with standard fasteners (screws, bolts, clips). Tighten bolts securely but do not overtighten. Reattach all lock linkages to the new actuator.
  7. Reconnect Electrical: Reconnect the new actuator's electrical plug. Ensure all connections are secure and correct.
  8. Test Functionality: Before reinstalling the door panel, reconnect the vehicle battery. Test the door lock and unlock functions multiple times to ensure the new actuator is working correctly. Check for smooth operation and proper latching.
  9. Reinstall Door Panel: Once functionality is confirmed, reinstall the door panel in reverse order of removal. Reconnect any wiring that was detached from the door panel itself.

4. Operating Instructions

Once properly installed, the door lock latch actuator restores the normal locking and unlocking functionality of your vehicle's rear left door. Operation is integrated with your vehicle's existing central locking system (key fob, interior lock/unlock buttons).

  • Use your vehicle's remote key fob or interior door lock/unlock switch to operate the door lock.
  • Ensure the door latches securely when closed and releases smoothly when opened.

5. Maintenance

The door lock latch actuator is a sealed unit and generally requires no specific maintenance after installation. However, regular inspection of the door's moving parts can help ensure longevity:

  • Periodically check the door latch mechanism for any debris or obstructions.
  • Ensure all electrical connections remain secure and free from corrosion.
  • If any unusual noises or stiffness occur during door operation, inspect the mechanism for issues.

6. Troubleshooting

If you experience issues after installation, consider the following troubleshooting steps:

  • Door Not Locking/Unlocking:
    • Check all electrical connections to the actuator. Ensure they are fully seated and free from damage.
    • Verify that the vehicle battery is fully charged and providing adequate power.
    • Inspect the wiring harness for any cuts, pinches, or corrosion.
    • Ensure all mechanical linkages are correctly attached and move freely without binding.
  • Intermittent Operation:
    • This can often be caused by a loose electrical connection. Re-check all connections.
    • Ensure no debris is interfering with the actuator's internal mechanism or the door latch.
  • Unusual Noises:
    • Verify that the actuator is securely mounted and not loose.
    • Check for any interference between the actuator and other door components.

If problems persist after these steps, it is recommended to consult a qualified automotive technician.

7. Specifications

FeatureSpecification
Model NameDR-DLLA005
OEM Part Numbers4G0839015, 4G0839015A, 4G0839015C
MaterialMetal and Plastic
PositionRear Left Door
Connector Pins9 Pins
External Testing CertificationISO9001
Item Weight0.8 KG
Item Dimensions (L x W x H)19 cm x 16 cm x 13 cm
OriginMainland China
FitmentVolkswagen Touareg 3.0L/3.6L V6 (2011-2017)

8. User Tips

  • Always double-check the OEM part number of your original actuator against the replacement part to ensure perfect compatibility.
  • If you are unsure about any step of the installation process, it is highly recommended to seek assistance from a certified automotive mechanic.
  • When removing the door panel, use appropriate trim removal tools to avoid scratching or damaging the interior components.

9. Warranty and Support

9.1 Warranty Terms

Warranty Period: 12 Months from the date of purchase.

Coverage: The warranty covers manufacturing defects only. It does NOT cover damage caused by improper installation, misuse, accident, normal wear and tear, unauthorized modification, or failure to follow instructions provided in this manual.

Warranty Claims: For warranty claims, please contact the seller via AliExpress store customer service. You will need to provide your order number, product photos, and a detailed description of the fault.

9.2 Customer Support

For any questions, technical assistance, or support, please contact our customer service team:

  • WhatsApp Support: +86 13600173478 (24 Hours Full-time Customer Support)
  • You can also contact us via AliExpress order chat. Please provide your order number, car model, and product photos/videos when you need help.

9.3 EU Responsible Person

This entity is designated as the EU Responsible Person, responsible for product compliance with EU Regulation (EU) 2019/1020 and relevant automotive safety standards.

  • Company Name: Alter Agent S.R.L.
  • Full Address: Via Paolo Sarpi 11, 20154 Milano MI, Italy
  • Contact Email: cqzk6653@hotmail.com
  • Contact Phone: +39 3780423021

© 2024 Winlinte. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.