Introduction
Thank you for choosing the LINCUKOO Smart Water Leak Detector and LoRa Gateway. This system provides advanced water leakage detection with ultra-long range LoRa technology, ensuring your home is protected from water damage. This manual will guide you through the setup, operation, and maintenance of your device.
Package Contents
Please verify that all items are present in your package:
- 1x LoRa Gateway
- 3x Water Leak Sensors
- 1x Quick Installation Guide
- 6x AAA Batteries
- 1x USB Power Cable
Setup Instructions
1. Install the Smart Life App
Search for "Smart Life" in your device's APP Store (iOS) or Google Play Store (Android) and install the application. Register for an account if you don't already have one.
2. Connect the Gateway to Your Router
- Power on the Gateway: Connect the LoRa gateway to a power source using the provided USB cable.
- Add Gateway in Smart Life App:
- Ensure your mobile phone is connected to a 2.4 GHz Wi-Fi network (5 GHz networks are not supported).
- When powering on for the first time, the gateway's indicator light will flash.
- Open the "Smart Life" app, tap the "+" icon in the top-right corner, and select "Add Device."
- Follow the on-screen instructions to connect the gateway to your network.
- If the blue light is not flashing, press and hold the button on the gateway for 5 seconds until the pairing indicator light flashes, then proceed with adding the device.
3. Pairing Sensors to the Gateway
- Open the Sensor Cover: Gently open the cover of each water leak sensor.
- Install Batteries: Insert two AAA batteries into each sensor. Ensure to remove any insulation sheet if present.
- Pair with Gateway: Press the button inside the sensor until its LED blinks.
- Add Sensor in Smart Life App:
- Open the "Smart Life" app and navigate to the LoRa gateway homepage.
- Tap "Search new device" or "Add Devices."
- Follow the in-app instructions to connect the sensor to your gateway.
Operating Instructions
1. Placement of Gateway and Sensors
- Place the LoRa gateway in a suitable location, ensuring it remains connected to your Wi-Fi router.
- Position the water leak sensors in areas prone to water leaks, such as under washing machines, beneath sinks, in pipe gaps, basements, or other narrow and hard-to-notice areas.
2. Leak Detection and Alerts
- The sensors feature dual detection capabilities: two sensitive probes on the top for detecting dripping water from above and four on the bottom for detecting leaks and seepage.
- The drainage channels at the bottom are designed to speed up detection, allowing the device to detect leaks as shallow as 0.3 mm in just 0.1 seconds.
- Upon detecting water, the sensor will trigger a 120-decibel local alarm and send instant notifications to your smartphone via the Smart Life app (iOS/Android).
Maintenance
Battery Replacement
Each water leak detector is powered by two high-capacity AAA batteries, offering up to 1 year of battery life. The Smart Life app will notify you when the battery power is low, prompting you to replace them. To replace batteries:
- Gently open the sensor cover.
- Remove the old AAA batteries.
- Insert new AAA batteries, ensuring correct polarity.
- Close the sensor cover securely.
Troubleshooting
Gateway Cannot Connect to Router
- Ensure both your mobile phone and the gateway are close to the router during the connection process.
- Verify the gateway is in pairing mode. It enters pairing mode automatically on first installation. For subsequent pairing, press and hold the gateway button until the blue LED blinks.
- Confirm your mobile phone is connected to a 2.4 GHz Wi-Fi network.
Sensor Cannot Connect to the Gateway
- Ensure the sensor is near the gateway during the pairing process.
- Check the network signal strength on the sensor's page within the Smart Life app and ensure it is in good condition.
Cannot Receive Notifications or Alarm Sound
- Verify that the gateway is connected to the router and that the router has an active internet connection.
- Check the sensor's settings page in the Smart Life app to ensure that the appropriate alarm function is enabled.
Specifications
| Feature | Detail |
|---|---|
| Brand | LINCUKOO |
| Model | LoRa gateway 3Pack |
| Wireless Technology | LoRa (Long Range) Protocol, 2.4 GHz Wi-Fi (Gateway) |
| Wireless Range | Up to 2000ft/600m (open areas), penetrates up to 10 thick walls |
| App Compatibility | Tuya Smart / Smart Life App (iOS/Android) |
| Alarm Sound Level | 120 dB |
| Detection Sensitivity | Detects water as shallow as 0.3 mm, responds in 0.1 seconds |
| Waterproof Rating | IP66 |
| Sensor Dimensions | 84 mm (L) x 36 mm (W) x 26 mm (H) |
| Power Source (Sensors) | 2x AAA batteries |
| Battery Life (Sensors) | Up to 1 year |
| Certifications | CE, FCC, RoHS |
User Tips
- Sensor Sensitivity: The sensors are highly sensitive. Alarms may occur if touched by hand; this is a normal response indicating proper function.
- Optimal Placement: For best results, place sensors directly on surfaces where water leaks are most likely to occur, such as under pipes, near water heaters, or in basements.
- Wi-Fi Network: Always ensure your gateway is connected to a stable 2.4 GHz Wi-Fi network for reliable alerts.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official LINCUKOO website or contact their customer service directly. The full user manual is also available in PDF format for detailed instructions.
You can access the User Manual (PDF) here.