TWS B48

Contents

TWS In-ear Headphones B48 User Manual

Model: B48

Introduction

Thank you for choosing the TWS In-ear Headphones Model B48. These true wireless earbuds are designed to provide a high-fidelity audio experience with advanced features such as Bluetooth 5.4 connectivity, HIFI sound quality, low-latency for gaming, and intuitive touch controls. This manual will guide you through the setup, operation, and maintenance of your new headphones to ensure optimal performance and longevity.

TWS In-ear Headphones B48 with charging case and two pairs of earbuds
TWS In-ear Headphones B48, highlighting HIFI Sound, Bluetooth 5.4, and extended battery life.

Package Contents

  • TWS In-ear Headphones (Left and Right Earbuds)
  • Charging Case
  • Charging Cable (Type-C)
  • User Manual

Specifications

Feature Specification
Model B48
Bluetooth Version 5.4
Support Protocols HFP V1.7, HSP V1.2, A2DP V1.3, AVRCP V1.6
Charging Current (Earbuds) DC5V-25mA
Charging Current (Case) DC5V-1A
Charging Time (Earbuds) Approx. 1 hour
Charging Time (Case) Approx. 2 hours
Music Playback Time Approx. 6 hours (single charge), 26 hours (with charging case)
Transmit Distance Up to 10 meters
Earbud Battery Capacity 30mAh / 3.7V
Charging Case Battery Capacity 300mAh / 3.7V
Frequency Response Range 20Hz - 20KHz
Earphone Rated Consumption Current 10mA
Material Metal, Plastic
Weight 135g (total package)
Waterproof Rating IPX4 (Splash and light rain prevention)
Voice Assistant Built-in
Active Noise-Cancellation Yes
Connectors Type-C
Certification CE, FCC
Product parameter table for model B48
Detailed product parameters for Model B48.
Product packaging showing specifications and certifications
Product packaging displaying key specifications and certifications like FCC, CE, RoHS.

Setup Instructions

1. Initial Charging

Upon receiving your headphones, it is recommended to fully charge them before first use. Connect the provided Type-C data cable to the charging case and a suitable power source. The digital display on the charging case will indicate the charging status. Avoid using super fast chargers with a current of 2A or above to prevent damage to the internal circuit chip. Only use the supporting data cable for charging.

Charging case displaying 100% battery
Charging case displaying 100% battery level.

2. Power On/Off

  • Power On: The headphones will automatically turn on when removed from the charging case.
  • Shut Down: Place both earbuds back into the charging compartment and close the lid. The headphones will automatically shut down.

3. Bluetooth Pairing

  1. Ensure both earbuds are fully charged.
  2. Open the charging case lid and remove both the left and right earbuds. Both earbuds will flash their power-on light once.
  3. Wait for 8-10 seconds for the earbuds to automatically pair with each other.
  4. On your mobile device, open the Bluetooth settings.
  5. Search for the corresponding Bluetooth name (e.g., "B48" or similar) and select it to connect.
  6. If one earbud fails to connect or if your device shows two separate earbud connections, cancel any existing pairings on your phone. Place both earbuds back into the charging case, close the lid, then open it again and repeat the pairing process.

Auto-Reconnect: Once successfully paired, the headphones will automatically reconnect to your mobile phone when turned on and within range.

Bluetooth 5.4 chip illustration
Illustration of the upgraded Bluetooth 5.4 for stable and fast connection.

Operating Instructions

The TWS B48 headphones feature intuitive touch controls on each earbud. Refer to the following table for basic functions:

Function Action
Power On Automatically when removed from charging case
Shut Down Place in charging case and close lid
Play/Pause Click the multifunction key once on either earbud
Next Song Long press the multifunction key for 3 seconds (Right earbud)
Previous Song Long press the multifunction key for 3 seconds (Left earbud)
Volume Up Double-click the multifunction key on the Right earbud
Volume Down Double-click the multifunction key on the Left earbud
Answer/End Call Click the multifunction key once on either earbud
Reject Call Long press the multifunction key on either earbud during an incoming call
Activate Voice Assistant Triple-click the multifunction key on either earbud
Switch Voice (Chinese/English) Tap 5 times continuously (when not connected to Bluetooth)
Diagram of touch control functions
Visual guide to touch control functions on the earbuds.

Maintenance

  • Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Avoid using harsh chemicals or abrasive materials.
  • Storage: When not in use, store the earbuds in their charging case to protect them from dust, moisture, and physical damage.
  • Charging: Always use the provided charging cable and a standard 5V-1A charger. Avoid using fast chargers (2A or above) to prevent battery degradation and potential damage to the earbuds' internal components.
  • Water Resistance: The earbuds are IPX4 rated, meaning they are resistant to splashes and light rain. Do not submerge them in water or expose them to heavy rain. Dry them thoroughly if they get wet.

Troubleshooting

  • Earbuds not turning on: Ensure the earbuds are charged. Place them in the charging case and close the lid, then open it again to activate.
  • Only one earbud working/pairing: This is a common issue. Try the following steps:
    1. Forget or unpair the headphones from your device's Bluetooth settings.
    2. Place both earbuds back into the charging case and close the lid.
    3. Open the lid and remove both earbuds. Wait for 8-10 seconds for them to pair with each other.
    4. Reconnect to your device via Bluetooth.
  • Low battery warning: A low battery warning tone will sound when the earbud battery voltage drops below 3.4V, repeating every 60 seconds. Charge the earbuds promptly.
  • Automatic shutdown: Earbuds will shut down immediately if the battery voltage drops below 3.2V. If no Bluetooth connection is established after pairing, the earbuds will shut down after 3 minutes.
  • Charging not completing: The charging case automatically stops charging when the earbuds reach 4.2V (fully charged).
  • Volume synchronization issues (iPhone): While Bluetooth connection is successful, the iPhone may not display a battery icon for the earbuds, but volume synchronization should still function.

User Tips

  • For the best audio experience, ensure both earbuds are properly seated in your ears to maximize sound isolation and bass response.
  • Regularly clean the earbud grilles to prevent wax buildup, which can affect sound quality.
  • If you experience any pairing issues or only one earbud connects, performing a full reset by unpairing from your device and re-pairing both earbuds from the charging case often resolves the problem.
  • The headphones offer good value for money and generally provide a satisfactory sound experience.

Warranty and Support

For warranty information or technical support, please refer to the seller's policy or contact their customer service directly. Keep your proof of purchase for any warranty claims.

A PDF version of the user manual may be available for download from the product page or seller's website for detailed instructions and diagrams.

© 2024 TWS In-ear Headphones. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.