Introduction
Thank you for choosing the NearStream USB/XLR Condenser Gaming Microphone M16. This professional microphone is designed for high-quality audio capture, ideal for live streaming, gaming, podcasting, and recording. It features versatile connectivity, customizable RGB lighting, and a robust design for optimal performance.

What's in the Box?
- 1x Microphone with Shock Mount & Pop Filter
- 1x Tripod Stand
- 1x 6.6ft (2m) USB-C to USB-A/C Cable
- 1x User's Manual (this document)
Product Overview
The NearStream M16 microphone is equipped with several features for enhanced usability and audio quality:
- Mute Button: Tap to mute or unmute the microphone. The RGB light indicates the microphone's active status (on when active, off when muted). Note: The RGB light color changes automatically in a preset mode and cannot be manually adjusted via the microphone or software.
- Mic Capsule: Features a condenser microphone element with a cardioid polar pattern for focused sound capture.
- USB-C Port: For direct connection to your computer or console using the included USB cable.
- Shock Mount: Designed to isolate the microphone and suppress unwanted rumbles and bumps.
- Microphone Gain Control: Adjusts the sensitivity of the microphone capsule. Turn clockwise to increase gain, and counter-clockwise to decrease.
- Pop Filter: Helps filter out harsh plosive sounds (e.g., 'p', 't', 'b').
- 3.5mm Earphone Hole: For real-time, zero-delay audio monitoring.
- Built-in HIFI Level Sound Card: Incorporates a DSP intelligent chip for noise reduction and high-fidelity sound quality.
- Colorful RGB Lighting System: Offers 8 adjustable and controllable RGB modes, including static solid color, dynamic multi-color gradient, and dynamic solid color gradient.
- Flexible Angle Adjustment: The microphone can be adjusted 360 degrees. The included boom arm provides 270-degree, 180-degree, and 360-degree rotation capabilities for versatile positioning.






Setup Guide

1. Physical Assembly
- Attach the microphone onto the tripod stand (or boom arm) and tighten it securely.
- Adjust the angle of the microphone using the thumbscrew to your desired position.
2. Connecting to Your Device
The NearStream M16 is compatible with PC, PS4, PS5, and Mac OS.
- Plug the USB-A or USB-C connector of the provided cable into an available USB port on your computer or console (PS4/PS5).
- Upon connection, the microphone's RGB light will turn on, indicating it is powered.
- For first-time use, allow a few seconds for the device driver to automatically install. A pop-up window or message may not appear. If you plug the USB cable into a different USB port, the driver may reinstall.
3. Computer Setup (Windows)
- Right-click the speaker icon in the bottom-right corner of your screen and select "Sounds".
- In the Sound control panel, navigate to the "Recording" tab.
- Select "Fifine Microphone" as the default recording device. When you speak into the microphone, the bar-type icon should turn green and bounce. If it remains unchanged, restart your computer and replug the microphone into another USB port.
- The microphone input level is primarily controlled by the gain knob on the microphone itself, not directly by computer software.
4. Computer Setup (MAC OS)
- Plug the USB cable into your Mac. The RGB light will turn on. Your computer should automatically recognize the USB device and install a driver.
- Open "System Preferences" > "Sound" > "Input".
- Select "Fifine Microphone" as the Input Device. The input level meter will move when you speak into the microphone, indicating it is picking up your voice.
- For monitoring your voice on Mac, you must use recording software (e.g., Audacity). Enable "Software Playthrough" within the software and click the record button to begin.
- For speech-to-text functions, select "Fifine Microphone" as the default Dictation & Speech software and ensure "On" is selected under the Dictation window.
5. Output Settings
- Ensure your loudspeaker is open and adjust the output volume as needed.
- For real-time monitoring (Windows): In the Sound control panel, go to the "Recording" tab, select "Fifine Microphone", click "Properties", then "Listen", and check "Listen to this device". Important: Uncheck "Listen to this device" when using recording or chat software to avoid echo.
Operating Instructions
1. Microphone Positioning
- For optimal results, speak into the microphone within 7 inches (approx. 18 cm).
- Always ensure the pop filter is facing you to minimize plosive sounds.
- The ideal position for the cardioid microphone capsule is directly in front of the person speaking/singing or the sound source. Experiment with different distances to find the best sound for your specific setup.
2. Adjusting Microphone Gain
- Use the gain control knob on the microphone to adjust sensitivity.
- Turn clockwise to increase the gain (for louder input), and counter-clockwise to decrease the gain (for softer input).
- Adjust the gain to be as high as possible without causing distortion or overloading your computer's input levels.
3. Real-time Monitoring
- Plug your headphones into the 3.5mm earphone hole on the microphone for zero-delay monitoring of your audio.
- Adjust the headphone volume using the dedicated knob on the microphone.
4. RGB Lighting Modes
- The microphone features 8 RGB lighting modes. These modes cycle automatically.
- The RGB light indicates the microphone's active status (on when active, off when muted).

Maintenance
- Avoid exposing the microphone to open air or areas where temperatures exceed 110°F (43°C) for extended periods.
- Protect the microphone from extremely high humidity.
- Keep the microphone clean and free from dust. Use a soft, dry cloth for cleaning.
Troubleshooting
- Microphone not recognized / No sound output:
- Restart your computer and replug the microphone into a different USB port.
- Check if your system sound is muted.
- Ensure the microphone's RGB lighting is on, indicating it's active.
- For Windows 10 users: Go to Settings > Privacy > Microphone and ensure "Allow apps to access the microphone" is ON. Then restart your PC.
- If using recording software (e.g., Audacity), log out of the software, replug the microphone, and then restart the software.
- Inconsistent sound or volume changes:
- Disable any sound-activated recording functions in applications (e.g., "Automatically adjust volume" in Zoom).
- For Windows users: Go to Settings > Privacy > Microphone and disable microphone access for XBOX Console Companion and XBOX Game Bar.
- Audio Distortion / Overloaded Levels:
- Decrease the microphone gain using the gain control knob on the microphone.
- Insufficient Audio Level:
- Increase the microphone gain using the gain control knob on the microphone.
- Echo during monitoring:
- If you hear an echo while monitoring, ensure that "Listen to this device" is unchecked in your computer's sound settings when using recording or chat software.
Specifications
| Feature | Detail |
|---|---|
| Model Number | M16 |
| Element | Condenser Microphone |
| Power Supply | 5V |
| Operating Current | 50-80mA |
| Polar Pattern | Uni-directional (Cardioid) |
| Frequency Response | 60Hz-18KHz |
| Sensitivity | -40dB±3dB |
| S/N Ratio | 70dB A+ |
| Max SPL | 110dB |
User Tips
- Optimal Gain Setting: Always start with the microphone gain low and gradually increase it until your audio is clear and strong, but without peaking or distorting. This prevents harsh sounds in your recordings or streams.
- Pop Filter Placement: Ensure the pop filter is positioned directly between your mouth and the microphone. This is crucial for minimizing plosive sounds (like 'p' and 'b') and achieving professional-sounding vocals.
- Boom Arm Utilization: Take advantage of the boom arm's flexibility to position the microphone precisely. Keeping the microphone close to your mouth (within 7 inches) helps capture your voice clearly and reduces background noise.
- Cable Management: Use cable ties or clips to manage the USB cable, preventing accidental disconnections or interference during use.
Warranty and Support
Warranty Information
Every NearStream product comes with a Limited Warranty that guarantees the product will be free of any defects in material or workmanship for a period of one year from its original purchase date, under normal use. For detailed warranty information, please refer to the warranty policy on our official website or contact customer support directly.
Certification
This product is eligible to bear the CE Marking, indicating conformity with health, safety, and environmental protection standards for products sold within the European Economic Area (EEA).
Contact Support
For any technical assistance, warranty claims, or further inquiries, please visit our official website or contact our customer support team.
You can also refer to the full user manual PDF for additional details: View User Manual (PDF)