Introduction
The Qingping Air Quality Monitor Lite is a compact and delicate 5-in-1 air quality monitor designed for indoor use. It features a high-precision sensor capable of detecting CO2, PM2.5, PM10, temperature, and humidity. This device supports integration with smart home platforms like Apple HomeKit and Mi Home/Xiaomi Home, and also functions as a Bluetooth Gateway for other smart devices. Its intuitive design and comprehensive monitoring capabilities help you maintain a healthy indoor environment.
Setup
1. Charging
Use the provided USB-C charging cable and a 5V-1A power adapter. Plug the cable into the USB-C port on the back of the device. Ensure the ambient temperature does not exceed 40°C during charging. The product requires approximately 4 hours for a full charge and has a power management function similar to laptops to protect the battery.
2. Power On/Off
- Power On: Long press the power button on the back of the product.
- Turn Off Screen: Press the power button on the back of the product once.
- Power Off Device: Long press the power button on the back of the product until it turns off.
3. Reset Network Settings
Press and hold the concave bar on the top of the product for at least 8 seconds until a large Wi-Fi icon appears on the screen. This puts the device into pairing mode.
4. Reset Factory Settings
Press and hold the concave bar on the top and the power button on the back of the product simultaneously for at least 8 seconds until the product reboots.
5. App Connection
The Qingping Air Quality Monitor Lite supports connection with Apple HomeKit, Mi Home/Xiaomi Home, and Qingping+ apps. It can only be connected to one smart home platform at a time.
Connect to Apple HomeKit (Home app)
- Open the Home app on your iOS or iPadOS device.
- Tap the '+' icon, then select "Add or Scan Accessory".
- Follow the on-screen instructions to add your Qingping Air Monitor Lite.
Note: If adding fails, reset the device's network settings and try again. To control the accessory automatically or remotely via the Home app, you must set up a HomeKit hub device (e.g., HomePod, Apple TV, or iPad). It is recommended to update to the latest software and operating system.
Connect to Mi Home / Xiaomi Home app
- Download and install the Mi Home / Xiaomi Home app from your app store (search "Mi Home/Xiaomi Home").
- Open the app and log in to your account.
- Tap the '+' icon in the upper right corner and follow the prompts to add your device.
Note: The app version may vary; follow current app instructions. If the product is not found, try changing the server in the app's settings to "Chinese mainland" and try again. The "Works with Mijia" logo signifies software-level verification; Xiaomi and Mijia are not responsible for product manufacturing, standards, or quality supervision.
Connect to Qingping+ app
The Qingping+ app allows you to view readings, access historical data, and upgrade firmware.
- Visit qingping.co/plus or search "Qingping+" on the App Store or Google Play to download.
- Open the app, add a device, select "Qingping Air Monitor Lite", and follow instructions.
Note: If your device is already added to the Home app, it will automatically appear in the Qingping+ app.
Operating Instructions
1. Interface and Display
The device features an OLED screen. Tap or slide the concave bar on the top of the product to switch between different measurement pages (CO2, PM2.5, PM10, Temperature, Humidity).
2. Air Quality Indication
The device uses colorful indicator lights to provide a quick visual assessment of air quality. The grading and colors vary for PM2.5, PM10, CO2, temperature, and humidity.
CO2 Example:
| Color | Scope (ppm) | Review |
|---|---|---|
| ● Green | 0 ~ 1000 | Normal |
| ● Yellow | 1000 ~ 2000 | Slightly high concentration |
| ● Red | 2000 ~ 3000 | High concentration |
| ● Dark Red | Over 3000 | Extremely high concentration |
3. Screen Saver Settings
The screen saver style and activation time are adjustable. You can choose to display only the current reading or rotate all readings. The screen saver activation time can be set between 1-10 minutes. The device can also auto-close the screen at night.
4. Smart Linkage and Remote Monitoring
Through the connected apps (Apple Home, Mi Home/Xiaomi Home), you can remotely view air conditions and receive instant alerts. The device supports smart linkage with other environmental appliances. For example, you can set an air purifier to automatically turn on when PM2.5 levels exceed a certain threshold, or a humidifier to activate when humidity drops below 30%.
Maintenance
- Do not block the vent hole of the sensor.
- This product is not waterproof or dustproof. Avoid using it in environments with humidity higher than 90% for extended periods.
- Do not throw the battery or the product with the battery into fire to avoid an explosion.
- Do not disassemble the product by yourself to avoid injury.
Troubleshooting
Common Issues & Solutions
| Issue | Solution |
|---|---|
| Cannot add the product in the mobile app (Android) | Allow the app to access 'Location' in system settings and turn on the Location service. (Scanning Bluetooth devices requires Location permission on Android.) |
| "E1" shows on the screen | The environment value exceeded the measurement range of the product. |
| "E2" shows on the screen | The sensor is malfunctioning. |
| Unable to connect multiple smart home platforms at the same time | This product doesn't support connecting multiple smart home platforms simultaneously. If it's added to one platform and you want to add it to another, please reset the device's network settings or perform a factory reset first. |
| Screen does not display content or displays abnormally after charging | Ensure the product is charged correctly. If the issue persists, contact support. |
| App unable to connect to the product | Ensure the app is correctly installed, Bluetooth is on, and the mobile phone is within the Bluetooth transmission range of the product. |
| Power button cannot be pressed or doesn't bounce back | Contact support for assistance. |
Sensor Accuracy & Online Use
- Difference in readings: For consistent readings across different devices, place them in a completely windless indoor environment, 20cm apart, and observe after 30 minutes of standing. Differences in temperature and humidity between rooms are common. Direct exposure to air conditioners or fans will affect accuracy.
- Device's own heat: The Qingping Air Detector Lite has a built-in compensation algorithm to minimize the impact of its own heat on temperature and humidity readings, ensuring accuracy.
- Online requirement: The device works normally without an internet connection, but app features like remote viewing and historical data require connectivity.
Specifications
| Model | CGDN1 |
| Product Weight | 143g |
| Product Dimensions | 63.6 × 46 × 54.6 mm |
| Screen Size | 59.9 × 49.9 mm |
| Bluetooth | BLE 5.0 |
| Wi-Fi | IEEE 802.11 b/g/n 2.4GHz |
| Temperature Range | 0°C ~ 40°C |
| Humidity Range | 0 ~ 95%RH (non-condensing environment) |
| CO2 Range | 400 ~ 9999 ppm |
| PM2.5/PM10 Range | 0 ~ 500 µg/m³ |
| Battery Capacity | 2000mAh |
| Power Input | 5V-1A |
| FCC ID | 2AC7Z-ESP32WROVERB |
| Certification | CE |
User Tips
- Optimal Placement: For the most accurate readings, place the monitor in a central location away from direct drafts, windows, or heat sources. Allow it to stabilize for at least 30 minutes after placement or moving.
- Ventilation for CO2: If the CO2 reading is high (yellow or red indicator), consider opening windows or increasing ventilation to improve air freshness.
- App for Data Trends: Utilize the Qingping+ or Home/Mijia apps to view historical data and identify trends in your indoor air quality over time. This can help in understanding patterns and making informed decisions about ventilation or air purification.
- Smart Home Automation: Leverage the smart linkage features to automate other devices like air purifiers, humidifiers, or fans based on the monitor's readings for a proactive approach to air quality management.
Warranty & Support
Warranty Information
Qingping Technology (Beijing) Co., Ltd. provides a 1-year limited warranty service for the Qingping Air Monitor Lite in regions where branches or after-sales service centers are established. The warranty terms are as follows:
- Within 7 days of receipt: If the product has confirmed 'Performance Faults', customers are eligible for a refund or free exchange.
- From 8th to 15th day of receipt: If the product has confirmed 'Performance Faults', customers are eligible for a free replacement or repair service.
- Within 12 months of receipt: If the product has confirmed 'Performance Faults', customers are eligible for free maintenance service.
For quality problems in regions without Qingping branches or service centers, please contact your local seller.
Non-Warranty Conditions
The warranty does not cover:
- Unauthorized repair, misuse, collision, negligence, abuse, liquid injection, accident, alteration, or improper use of non-original accessories.
- Products where the warranty period has expired.
- Damage caused by force majeure (e.g., natural disasters).
- Situations not meeting the 'Performance Faults' criteria.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Contact Information
Qingping Technology (Beijing) Co., Ltd.Address: 309 Block C, Yeqing Plaza, No.9 Wangjing North Street, Chaoyang District, Beijing
Website: qingping.co
Email: support@qingping.co
For further assistance, please refer to the official user manual PDF available at Qingping Air Monitor Lite User Manual (PDF).