Introduction
This manual provides instructions for setting up and using your GGBEE S2 Tag Mini Bluetooth GPS Tracker. This device is designed to help you locate your valuable items, children, or pets using the Apple Find My network on iOS devices.

Figure 1: Overview of the S2 Tag Bluetooth Anti-Loss Device features.

Figure 2: Compact design and core functionalities of the S2 Tag.
Setup Instructions
1. Power On the Device
- Quickly press and release the button on the S2 Tag to turn it on. The device will make a sound.
2. Pair the Device with Apple Find My
- Open the "Find My" app on your iPhone or iPad (iOS 14.5 or later required).
- Navigate to the "Items" tab.
- Tap the "+" icon, then select "Add Other Item".
- Hold the S2 Tag close to your iOS device.
- Tap "Connect" when the device is detected.
- Enter a name for your device and select an emoji to represent it.
- Tap "Agree" to acknowledge that the item will be linked to your Apple ID.
- Tap "Finish".

Figure 3: Visual guide for device pairing with the Find My app.
Operating Instructions
Locating Items
1. Find Item When It's Nearby (Play Sound)
- Open the "Find My" app and go to the "Items" tab.
- Select your S2 Tag from the list.
- Tap "Play Sound" to make the S2 Tag emit a beep.
- Tap "Stop Sound" once you have located your item.

Figure 4: Using the "Play Sound" feature to find nearby items.
2. Find Item's Location (Map Tracking)
- Open the "Find My" app and go to the "Items" tab.
- Select your S2 Tag from the list.
- The item's last known location will appear on the map with a timestamp.
- Tap "Directions" to open Apple Maps and navigate to the location.

Figure 5: App displaying the last known location of the S2 Tag.

Figure 6: Real-time positioning for accurate indoor search.
3. Reverse Search Phone
- Double-click the button on the S2 Tag.
- Your paired iPhone will ring, even if it's on silent mode, helping you locate your phone.

Figure 7: Using the S2 Tag to find your phone.
Notifications
1. Enabling "Notify When Left Behind"
- In the "Find My" app, go to the "Items" tab and select your S2 Tag.
- Under "Notifications", enable the "Notify When Left Behind" toggle.
- You will receive an alert if you leave your item behind and it goes out of range of your device.
2. Enabling "Notify When Found"
- In the "Find My" app, go to the "Items" tab and select your S2 Tag.
- Under "Notifications", enable the "Notify When Found" toggle.
- If your S2 Tag is out of range and is detected by another device in the Find My network, you will receive a notification of its location.
- Note: "Notify When Found" can only be activated when your item is out of range.
Lost Mode
- Open the "Find My" app, go to the "Items" tab, then tap your S2 Tag.
- Under "Lost Mode", tap "Enable".
- Follow the instructions to enter a phone number or email address and customize a lost message.
- Confirm the information and tap "Activate" to complete the setup.
- If someone finds your S2 Tag, they can use an NFC-enabled smartphone to view your contact information and message.
Maintenance
Battery Replacement
The S2 Tag uses a user-replaceable CR2032 coin cell battery, which typically lasts over a year. When the battery is low, you may receive a notification on your iOS device.
- Carefully open the S2 Tag casing.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the casing securely.

Figure 8: Illustration of the replaceable button battery.
Cleaning
Wipe the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
Troubleshooting
Device Not Pairing
- Check Power: Ensure the device is powered on by pressing the button once. It should emit a sound.
- Proximity: Make sure the S2 Tag is close to your iOS device during pairing.
- Network Connection: Pairing may fail due to network problems. Try switching between Wi-Fi and cellular data on your phone.
- Factory Reset: If pairing continues to fail, perform a factory reset:
- With the device powered on, press the button five times.
- On the fifth press, hold the button down until the device plays a tune.
- Release the button to complete the reset.
- Attempt to pair the device again.
Device Not Responding / Not Ringing
- Check Battery: The battery might be depleted. Replace the CR2032 coin cell battery.
- Double-Click Test: Double-click the device button. If it does not beep, it might not be powered on or the battery is dead.
- Re-enter Pairing State: If the device was previously removed from the app and not re-paired within 10 minutes, it will exit pairing mode. Press the device button once to re-enter pairing mode, then attempt to pair again.
Privacy Concerns (Unwanted Tracking)
The S2 Tag is designed with anti-tracking features:
- If an S2 Tag separated from its owner is detected moving with you over time, you will receive a notification on your iPhone or iPad (iOS 14.5 or later).
- If you don't have an iOS device, an S2 Tag not with its owner for a period will emit a sound when moved.
- Your location data is anonymous and encrypted.
Specifications
| Feature | Detail |
|---|---|
| Product Name | Intelligent anti-loss locator (S2 Tag) |
| Compatibility | iOS Find My APP (iOS 14.5 or later) |
| Connectivity | Bluetooth 5.1 / 5.2 (BLE) |
| Speaker | Built-in, ≥75dB (10cm) |
| Battery | User-replaceable CR2032 coin cell battery |
| Operating Voltage | DC 3V |
| Standby Time | Up to 365 days |
| Weight | 8g |
| Product Size | 36 * 46 * 8mm |
| Color Options | Black, White |

Figure 9: Product dimensions and technical parameters.
User Tips
- For optimal performance, ensure your iOS device is updated to iOS 14.5 or later.
- When replacing the battery, use a fresh CR2032 coin cell to maximize standby time.
- Consider attaching the S2 Tag to frequently misplaced items like keys, wallets, or backpacks for easy tracking.
- The "Notify When Left Behind" feature is particularly useful for preventing loss of important items.

Figure 10: Examples of how the S2 Tag can be used in daily life.
Warranty and Support
For detailed warranty information, legal notices, and further support, please refer to the official user manual PDF provided by the manufacturer. You can access the PDF document here.
The device is certified with CE and RoHS standards, indicating compliance with health, safety, and environmental protection standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS, and watchOS are trademarks of Apple Inc. iOS is a trademark or registered trademark of Cisco in the US and other countries and is used under license.