YTYIN 82460C7000

Contents

Instruction Manual: A+ Regulator Window Lifter Motor

Model: 82460C7000

1. Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your YTYIN A+ Regulator Window Lifter Motor, specifically designed for the 2016-2020 Hyundai I20. Please read this manual thoroughly before use to ensure proper function and to prevent damage or injury.

2. Safety Information

Failure to follow these safety instructions may result in product damage or personal injury. Always exercise caution when handling and installing automotive components.

  • Caution: Assembly kit contains parts with sharp edges and sharp points. Handle with care to avoid cuts or injuries.
  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult during installation or handling.
  • Inspect the product before each use; do not use if damaged.
  • Follow all installation and operation guidelines to avoid injury.
  • Do not expose to water or moisture.

The product packaging includes general safety symbols indicating caution (exclamation mark triangle) and a small parts choking hazard for children 0-3 years old.

3. Product Overview

The A+ Regulator Window Lifter Motor is a replacement component for the front right window of the Hyundai I20 (2016-2020). It is responsible for the powered movement of the window glass.

Top view of the window lifter motor
Figure 3.1: Top view of the A+ Regulator Window Lifter Motor. This view shows the main motor housing and the gear mechanism.
Angled view of the window lifter motor showing gear and mounting points
Figure 3.2: Angled view highlighting the output gear and mounting screw holes.
Close-up of the electrical connector on the motor
Figure 3.3: Detail of the electrical connector for power and control signals.

4. Specifications

FeatureDetail
Product NameA+ Regulator Window Lifter Motor
Brand NameYTYIN
Model Number (OE)82460C7000
Compatible VehicleHyundai I20 (2016-2020)
Installation PositionFront Right
OriginMainland China
Batch/Internal Model (from PDF)202501023 (Product Model: 339-568893)
Package Dimensions (L x W x H)9 cm x 9 cm x 6 cm
Package Weight0.4 kg
ComplianceCE, FC

5. Installation (Setup)

Installation of this window lifter motor requires basic automotive repair knowledge and tools. If you are unsure about any step, it is recommended to seek professional assistance.

5.1 Before First Use

  • Ensure the vehicle's battery is disconnected to prevent electrical shorts or injury.
  • Remove any protective films or packaging materials from the new motor.
  • Verify that the new motor matches the original part (OE number 82460C7000) and is intended for the front right window of your Hyundai I20 (2016-2020).
  • Gather necessary tools, which typically include screwdrivers, socket wrenches, and trim removal tools.

5.2 Installation Steps (General Guide)

  1. Carefully remove the interior door panel of the front right door. Refer to your vehicle's service manual for specific instructions on door panel removal.
  2. Locate the existing window regulator and motor assembly.
  3. Disconnect the electrical connector from the old motor.
  4. Unbolt the old motor from the window regulator assembly. Note the orientation and mounting points.
  5. Carefully remove the old motor, ensuring the window glass is supported to prevent it from falling.
  6. Align the new YTYIN window lifter motor with the window regulator assembly.
  7. Secure the new motor to the regulator using the appropriate bolts. Ensure all mounting points are tightened securely.
  8. Reconnect the electrical connector to the new motor.
  9. Before reassembling the door panel, reconnect the vehicle's battery and test the window operation (up and down) to ensure it functions correctly and smoothly.
  10. If the window operates correctly, reinstall the interior door panel, ensuring all clips and screws are properly secured.

Note: This is a general guide. Specific vehicle models may have variations in the installation process. Always consult your vehicle's official service manual for detailed, model-specific instructions.

6. Operation

Once installed, the window lifter motor operates in conjunction with your vehicle's existing window switch. Pressing the switch up or down will activate the motor, causing the window glass to move accordingly.

  • Ensure no obstructions are in the window's path when operating.
  • Avoid continuous operation of the window switch for extended periods, as this can overheat the motor.
  • If your vehicle has an "auto up/down" feature, it should function normally after proper installation and any necessary system resets (refer to your vehicle's manual).

7. Maintenance

The YTYIN A+ Regulator Window Lifter Motor is designed for long-term, maintenance-free operation. However, general care of your vehicle's window system can prolong its lifespan.

  • Keep window tracks clean and free of debris.
  • Periodically inspect the window seals for wear or damage.
  • If the window operation becomes sluggish, inspect the window tracks and regulator for any obstructions or lubrication needs.
  • After use, if the motor is removed for any reason, turn off the device and store it in a dry place, away from children.

7.1 Disposal Information

When the product reaches the end of its life, please dispose of it responsibly according to local regulations. Do not dispose of electrical components with general household waste.

The packaging indicates that packaging elements should be separated and deposited in the sorting bin (BAC DE TRI).

8. Troubleshooting

If you encounter issues after installation, refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Window does not moveLoose electrical connection, blown fuse, faulty switch, motor not properly seated.Check electrical connector, inspect vehicle's fuse box, test window switch, ensure motor is securely bolted.
Window moves slowly or with difficultyObstruction in window track, worn window regulator, insufficient lubrication, motor struggling.Clean window tracks, inspect regulator for damage, lubricate tracks, ensure correct motor installation.
Grinding or clicking noiseDamaged gear, misaligned regulator, foreign object in mechanism.Re-inspect installation, check for debris, consider professional inspection if noise persists.

If troubleshooting steps do not resolve the issue, contact customer support or a qualified automotive technician.

9. User Tips

  • Always double-check the OE part number (82460C7000) against your vehicle's original part before purchase and installation to ensure compatibility.
  • When removing the door panel, use plastic trim removal tools to avoid scratching or damaging the interior.
  • Take photos during disassembly to aid in reassembly.
  • After installation, cycle the window up and down a few times to ensure smooth operation and proper seating of all components.

10. Frequently Asked Questions (FAQ)

Q: Is this motor compatible with other Hyundai models?
A: This specific model (82460C7000) is designed for the 2016-2020 Hyundai I20 (Front Right). Compatibility with other models is not guaranteed without cross-referencing OE part numbers.
Q: Do I need special tools for installation?
A: Standard automotive tools such as screwdrivers, socket wrenches, and trim removal tools are typically sufficient. A vehicle-specific service manual is highly recommended.
Q: What if the window doesn't work after installation?
A: First, check all electrical connections and ensure the vehicle's fuse for the power windows is intact. Refer to the Troubleshooting section in this manual.

11. Warranty and Support

For warranty information or technical support, please contact the manufacturer or your point of purchase.

  • Manufacturer: Zhengzhou Qige Cheng Trading Co., Ltd.
  • EU Authorized Representative: Sophie Bennett, 9 rue du Bat d'Argent, 69001 Lyon, France, 33-74555006
  • Additional Documentation: A user manual in PDF format is available for reference: View User Manual (PDF)
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.