1. Introduction
Thank you for purchasing a GODOX product. The TT600 camera flash adopts the Godox wireless X system and 2.4G ratio transmission, making it compatible with AD360II-C, AD360II-N, TT685C, TT685N, X1T-C, X1T-N, and other wireless control systems. It is designed to fit all DSLR camera brands, including Canon, Nikon, Sony, etc.
Key features of the TT600 camera flash include:
- Guide Number (GN60): A powerful GN60 (m ISO 100, @200mm) with adjustable output from 1/1 to 1/128 in 1/3rd stops.
- Built-in 2.4G Wireless Transmission: Supports both transmitting and receiving for versatile off-camera flash setups.
- Advanced Functions: Offers high-speed sync, wireless remote control, multi-flash (stroboscopic) mode, and manual focus assist.
- Consistent Performance: Provides stable consistency and color temperature (5600K ± 200K) with good, even lighting.
- User-friendly Interface: Features a clear LCD display and an intuitive control panel for ease of use.
Please read this user manual carefully to ensure your safety and the proper operation of this product. Keep it for future reference.
2. Safety Warnings
- Always keep this product dry. Do not use it in rain or damp conditions.
- Do not disassemble the unit. Should repairs become necessary, this product must be sent to an authorized maintenance center.
- Keep out of reach of children.
- Stop using this product if it breaks open due to extrusion, falling, or strong impact. Otherwise, electric shock may occur if you touch the electronic parts inside.
- Do not fire the flash directly into the eyes (especially those of babies) within short distances. This may cause visual impairment.
- Do not use the flash unit in the presence of flammable gases, chemicals, or other similar materials. These materials may be sensitive to strong light, potentially causing fire or electromagnetic interference.
- Do not leave or store the flash unit if the ambient temperature exceeds 50°C. High temperatures can damage the electronic parts.
- Turn off the flash unit immediately in the event of malfunction.
3. Name of Parts
3.1. Flash Body

Figure 3.1: Godox TT600 Flash Unit Parts Diagram
- Catchlight Panel
- Built-In Wide Panel (Retracted)
- Flash Head
- Optic Control Sensor
- Focus Assist Beam
- Wireless Control Port
- Sync Cord Jack
- Hotshoe
- Lock Ring
- Battery Compartment
3.2. Control Panel

Figure 3.2: Godox TT600 Control Panel and LCD Display
- Mode Selection Button / Wireless Mode Selection (Long Keypress)
- Zoom / Function Custom Button (Long Keypress)
- Group / Channel Setting (Long Keypress)
- Select Dial
- Set Button
- ON/OFF Power Switch
- Test Button / Flash Ready Indicator
- Focus Assist Beam / High Speed Sync Button (Long Keypress)
3.3. LCD Panel Indicators
The LCD panel displays various settings and status indicators:
- M: Manual Flash Mode
- S1: S1 Slave Flash Triggering
- S2: S2 Slave Flash Triggering
- Multi: Multi/Stroboscopic Flash Mode
- H: High Speed Sync Triggering
- Battery Level Indication: Shows remaining battery power.
- Sound Beep Indication: Indicates if the beep function is on.
- z²: Sleep Status
- Overtemperature Indication: Alerts to overheating.
- Wireless Signal Transmission: Indicates wireless communication status.
- Focus Assist Beam Indicator: Shows if the focus assist beam is active.
- Channel (CH): Displays the selected wireless channel.
- Group (Gr): Displays the selected wireless group.
4. What's in the Box

Figure 4.1: Package Contents
- Flash unit
- Mini stand
- Protection case
- Instruction manual
4.1. Separately Sold Accessories
The TT600 can be used in combination with various separately sold accessories to achieve optimal photography effects. These include:

Figure 4.2: Optional Accessories
- Godox Cells II high-speed trigger
- FT-16S power & trigger control
- Car charger
- Mini softbox
- White & Silver Reflector
- Honeycomb
- Color gels
- Snoot
5. Setup: Attaching to a Camera

Figure 5.1: Attaching the Flash to a Camera
- Attach the Camera Flash: Slip the camera flash's mounting foot into the camera's hotshoe all the way.
- Secure the Camera Flash: Rotate the locking screw on the mounting foot until it locks up.
- Detach the Camera Flash: Rotate the locking screw on the mounting foot until it is loosened.
6. Operating Instructions
6.1. Power Management
Use the ON/OFF Power Switch (16) to power the flash unit on or off. Turn off the unit if it will not be used for an extended period. This flash unit has a Sleep Function and will enter sleep status when there is no operation for a long time. For Sleep Function settings, refer to section 6.8.5.
6.2. Flash Output
Flash output can be varied from 1/128th power to 1/1 full power in 1/3 stop increments. To obtain a correct flash exposure, use a hand-held flash meter to determine the required flash output. Adjust the power output by rotating the Select Dial (14).
| Reducing Output | Increasing Output |
|---|---|
| 1/1 > 1/1-0.3 > 1/1-0.7 > 1/2 > 1/2-0.3 > 1/2-0.7 > 1/4 ... | ... 1/4+0.3 > 1/4+0.7 > 1/2+0.3 > 1/2+0.7 > 1/1 |
When "OF" is shown on the LCD display, it means no flash output and flash firing is turned off.
6.3. ZOOM: Setting the Flash Coverage
The flash coverage can be set to match the lens focal length from 24 mm to 200 mm. Press the ZOOM/Fn button (12) and rotate the Select Dial (14) to change the flash coverage.
Caution: When setting the flash coverage, ensure it covers the lens focal length so that the picture will not have a dark periphery.
6.4. M Mode: Manual Flash
Press the MODE button (11) to enter M mode. In this mode, you can set the flash unit onto your camera hot shoe or your trigger hot shoe for firing. Before shooting, adjust the flash power output. When the camera's shutter is pressed, the flash will fire synchronously. Slave triggering mode is not available in M mode.
6.5. Multi Mode: Stroboscopic Flash
Press the MODE button (11) to enter Multi mode (Stroboscopic flash). With stroboscopic flash, a rapid series of flashes is fired. This can be used to capture multiple images of a moving subject in a single photograph. You can set the firing frequency (number of flashes per second, expressed as Hz), the number of flashes, and the flash output.

Figure 6.1: Stroboscopic Flash in action
Calculating the Shutter Speed: During stroboscopic flash, the shutter remains open until the firing stops. Use the formula: Number of flashes / Firing frequency = Shutter speed. For example, if the number of flashes is 10 and the firing frequency is 5 Hz, the shutter speed should be at least 2 seconds.
| Flash Output | 1 | 2 | 3 | 4 | 5 | 6-7 | 8-9 | 10 | 11 | 12-14 | 15-19 | 20-50 | 60-199 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 7 | 6 | 5 | 4 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 |
| 1/8 | 14 | 14 | 12 | 10 | 8 | 6 | 5 | 4 | 4 | 4 | 4 | 4 | 4 |
| 1/16 | 30 | 30 | 30 | 20 | 20 | 10 | 10 | 8 | 8 | 8 | 8 | 8 | 8 |
| 1/32 | 60 | 60 | 60 | 50 | 50 | 40 | 30 | 20 | 20 | 20 | 18 | 16 | 12 |
| 1/64 | 90 | 90 | 90 | 80 | 80 | 70 | 60 | 50 | 40 | 40 | 35 | 30 | 20 |
| 1/128 | 100 | 100 | 100 | 100 | 100 | 90 | 80 | 70 | 70 | 60 | 50 | 40 | 40 |
Caution: To avoid overheating and deteriorating the flash head during stroboscopic flash, do not use stroboscopic flash more than 10 times in succession.
6.6. S1/S2 Slave Triggering Mode
The TT600 offers S1 and S2 slave triggering modes for off-camera flash. To access these modes, long press the ZOOM/Fn button (12) for 2 seconds to enter the custom menu. Then, press the SET button (15) to choose OS (Optic Slave) and rotate the Select Dial (14) to choose OFF/S1/S2.
- S1 Mode: In S1 mode, the flash unit functions as a slave flash for creating multiple lighting effects. It is applicable in manual flash environments. The flash unit will fire synchronously when the master flash fires, mimicking the effect of radio triggers.
- S2 Mode: In S2 mode, the flash unit also functions as a slave flash for creative lighting. This mode is applicable when using a TTL master flash. The S2 mode ignores a single "preflash" from the master flash and will only fire in response to the second, actual flash from the master.
6.7. Hi-Speed Sync (HSS) Triggering
To enter HSS mode, long press the ZOOM/Fn button (12) for 2 seconds until the H icon is displayed. To exit, press the MODE button (11) or long press the ZOOM/Fn button (12) for 2 seconds again.
In HSS mode, you can use a hi-speed sync trigger to synchronize your flash unit with all camera shutter speeds (up to 1/8000 second, depending on your camera). This is particularly useful for fill-flash portraits when using aperture priority.

Figure 6.2: Compatible HSS Triggers
Note: HSS mode is effective only when the flash unit is used with specific flash triggers, such as the Godox Cells II transceiver or TTL wireless flash triggers (X1C/X1N). HSS mode is not available when the TT600 is mounted directly onto the camera.
6.8. Custom Functions (C.Fn Settings)
The TT600 allows customization of several functions. To enter the custom function settings, long press the ZOOM/Fn button (12) for 2 seconds.

Figure 6.3: Custom Function Settings on LCD
6.8.1. Focus Assist Lamp (FC)
In poorly-lit or low-contrast conditions, press the Focus Assist Beam / HSS button (18) to turn on the focus assist beam, making autofocus easier. The beam will automatically turn off after a set time following the last flash. This "No-Flash Time" is user-adjustable.
| Setting | Description |
|---|---|
| 10 seconds | Focus assist lamp turns off 10 seconds after the last flash. |
| 20 seconds | Focus assist lamp turns off 20 seconds after the last flash. |
| 30 seconds | Focus assist lamp turns off 30 seconds after the last flash. |
6.8.2. Buzz Function (bp)
To turn the buzz function on or off, long press the ZOOM/Fn button (12) for 2 seconds, then press SET (15) to enter "bp" mode. Rotate the Select Dial (14) to choose ON or OF (Off). When ON, the ♪ symbol will appear on the LCD display.
6.8.3. Wireless Flash Shooting: Ratio (2.4G) Transmission
The TT600 features 2.4G ratio transmission for wireless flash shooting (Master/Slave).
- Wireless Mode Setting: Long press the MODE button (11) for 2 seconds until the wireless icon blinks. Rotate the Select Dial (14) to set OFF/Master(M)/Slave(S) mode.
- Channel Setting: Long press the Group/CH button (13) for 2 seconds until the channel figure blinks. Rotate the Select Dial (14) to choose a channel from 1-32.
- Group Setting: Short press the Group/CH button (13) to select a group. In Master mode, groups M/A/B/C/D/E can be selected. In Slave mode, groups A/B/C/D/E can be selected.
6.8.4. Wireless Control Function
The flash unit has a built-in Wireless Control Port (6). To wirelessly adjust power levels, control the focus assist beam and buzzer, and trigger the flash, you need a Godox FT series remote control set (sold separately). Insert the receiver into the Wireless Control Port (6) on the flash and the transmitter into the camera hot shoe. Refer to the FT series remote control user manual for full instructions.
6.8.5. Sync Triggering
The Sync Cord Jack (7) is a Ø3.5mm plug. Insert a trigger plug here, and the flash will fire synchronously with the camera shutter.
6.8.6. Sleep Function (SL)
This product is equipped with a Sleep Function to prevent battery drain when idle. To enter the Sleep Function Mode, long press the ZOOM/Fn button (12) for 2 seconds. The LCD panel displays "SL" (Sleep) and "Sleeping Time". The idle time before entering Sleep Mode is 10 minutes by default. Rotate the Select Dial (14) to set a desired time or turn off the Sleep Function.
| Setting | Meaning |
|---|---|
| OFF | Sleep Function is turned off. The flash unit will not automatically enter sleep mode. |
| 3 minutes | Idle time before entering Sleep Mode is set to 3 minutes. |
| 10 minutes | Idle time before entering Sleep Mode is set to 10 minutes. |
| 30 minutes | Idle time before entering Sleep Mode is set to 30 minutes. |
| 60 minutes | Idle time before entering Sleep Mode is set to 60 minutes. |
When the flash enters sleep mode, the LCD panel displays a "z²" icon. To wake up the flash unit, press any button on the flash unit, or press the camera release button, or press the trigger TEST button.
Note: The idle time before entering Sleep Mode is recommended to be set short. This can ensure a longer battery life.
6.8.7. Backlight Setting (bL)
The backlight can be set to be always on (ON), off after 12 seconds (12), or always off (OF). To adjust, enter C.Fn settings, press SET (15) to enter "bL" mode, and rotate the Select Dial (14).
7. Maintenance
- If the flash unit operates abnormally, immediately turn off the power and identify the cause.
- Avoid strong vibrations to the unit. Regularly dust the surface.
- It is normal for the flash tube to become warm during use. Avoid continuous flashes if unnecessary.
- Maintenance must be performed by an authorized Godox maintenance department using original accessories.
- This product, excluding consumables like the flash tube, is covered by a one-year warranty.
- Unauthorized service will void the warranty.
- If the product has failures or has been wetted, do not use it until it is repaired by professionals.
- Changes made to the specifications or designs may not be reflected in this manual.
8. Troubleshooting: Error Prompts
The system provides real-time protection to secure the device and your safety. The following table lists prompts for your reference:
| Prompts on LCD Panel | Meaning |
|---|---|
| E0 | A failure occurs on the temperature sensor. Please send this kit to a maintenance center. |
| E1 | A failure occurs on the recycling system so that the flash cannot fire. Please restart the flash unit. If the problem still exists, please send this product to a maintenance center. |
| E2 | The system gets excessive heat. Please allow a rest time of 10 minutes. |
| E3 | The voltage on two outlets of the flash tube is too high. Please send this product to a maintenance center. |
8.1. Over-Temperature Protection
To prevent overheating and damage to the flash head, avoid firing more than 30 continuous flashes at 1/1 full power in fast succession. After 30 continuous flashes, allow a rest time of at least 10 minutes.
If you fire more than 30 continuous flashes in short intervals, the over-temperature protection function may activate, increasing the recycling time to 10-15 seconds. If this occurs, allow a rest time of about 10 minutes for the flash unit to return to normal. When over-temperature protection is active, the T icon is shown on the LCD display.
| Power Output Level | Number of Flashes |
|---|---|
| 1/1 | 30 |
| 1/2 +0.7 | 40 |
| 1/2 +0.3 | 50 |
| 1/2 | 60 |
| 1/4 (+0.3,+0.7) | 100 |
| 1/8 (+0.3,+0.7) | 200 |
| 1/16 (+0.3,+0.7) | 300 |
| 1/32 (+0.3,+0.7) | 500 |
| 1/64 (+0.3,+0.7) | 1000 |
| 1/128 (+0.3,+0.7) |
| Power Output Level | Number of Flashes |
|---|---|
| 1/1 | 15 |
| 1/2 (+0.3,+0.7) | 20 |
| 1/4 (+0.3,+0.7) | 30 |
| 1/8 (+0.3,+0.7) | |
| 1/16 (+0.3,+0.7) | |
| 1/32 (+0.3,+0.7) | 40 |
| 1/64 (+0.3,+0.7) | |
| 1/128 (+0.3,+0.7) | 50 |
9. Technical Data
| Feature | Specification |
|---|---|
| Product Model | TT600 / TT600S |
| Guide No. (1/1 power @ 200mm) | GN 60 (m ISO 100) |
| Vertical Rotation Angle | -7° to 90° |
| Horizontal Rotation Angle | 0° to 360° |
| Power Supply | Ni-MH batteries (recommended) or 4*LR6 alkaline batteries |
| Full Power Flashes | Approx. 230 (2500mA Ni-MH batteries) |
| Recycle Time | Approx. 0.1 to 2.6 seconds (eneloop Ni-MH batteries of Panasonic). Red LED indicator lights up when flash is ready. |
| Flash Duration | 1/300 to 1/20000 Second |
| Color Temperature | 5600K ± 200K |
| Wireless Flash Function | Master, Slave, Off |
| Controllable Slave Groups | 5 (A, B, C, D, E) |
| Transmission Range (approx.) | 100m |
| Channel | 1 to 32 |
| Dimension | 64mm * 76mm * 190mm |
| Weight without Battery | 400g |
| Weight with Battery | 500g |
| 2.4G Frequency Range | 2413.0MHz-2465.0MHz |
| Max. Transmitting Power | 5dbm |
10. User Tips
- Compatibility: The Godox TT600 is compatible with a wide range of DSLR cameras, including Sony models like the A-37.
- Performance: Users report the flash unit performs very fast and reliably, making it a dependable tool for various shooting scenarios.
- Bounce Flash: For softer, more natural lighting, point the flash head towards a plain, white wall or ceiling to bounce the light. Ensure the surface is not too far away to avoid underexposure.
- Catchlight: Use the built-in catchlight panel by pointing the flash head straight ahead and then upward by 90 degrees to add sparkle to your subject's eyes. For best results, keep the subject within 1.5 meters (4.9 feet).
- Wide Panel: Pull out the wide panel to enlarge the flash lighting range and achieve a softer, more natural lighting effect. This extends coverage to 14mm.
11. Warranty and Support
This product is covered by a one-year warranty, excluding consumables such as the flash tube. Unauthorized service will void the warranty. If the product has failures or has been wetted, do not use it until it is repaired by professionals.
For maintenance service, you can directly contact the product distributor or authorized service institutions. You can also contact Godox after-sale service. When applying for maintenance service, you should provide a valid warranty card. If you cannot provide a valid warranty card, service may still be offered if the product is confirmed to be within the maintenance scope, but this is not an obligation.
Godox After-sale Service Contact:
- Phone: 0755-29609320-8062
- Email: godox@godox.com
- Address: Building 2, Yaochuan Industrial Zone, Tangwei Community, Fuhai Street, Bao'an District, Shenzhen, China