MOES WCM-P52/WCM-P52P

Contents

MOES 4MP WiFi Smart PTZ Camera User Manual

Model: WCM-P52/WCM-P52P

1. Introduction

This manual provides detailed instructions for setting up and operating your MOES 4MP WiFi Smart PTZ Camera (Models WCM-P52 and WCM-P52P). This smart camera is designed to replace traditional cameras with versatile control options and seamless integration into your smart home ecosystem. It offers features such as HD 1080P video resolution, two-way audio, IR night vision, motion detection, and compatibility with popular smart home platforms like Alexa, Google Assistant, and Tuya.

The WCM-P52 model supports 2.4GHz wireless networks, while the WCM-P52P supports both 2.4GHz and 5GHz wireless networks, both with WPA and WPA2 encryption (WIFI6 for WCM-P52P).

MOES Smart PTZ Camera with icons for HD, Two-way Audio, IR Night Vision, Motion Detection, Adjustable Camera Angle, and smart home compatibility logos.

Figure 1: MOES Indoor Smart Camera highlighting key features and smart home compatibility.

2. Important Safety Warnings

  • Do not disassemble, reassemble, modify, or attempt to repair this product by yourself. All maintenance and repair work should be performed by authorized professionals.
  • Product batteries (if applicable) should be recycled and must be recycled or disposed of separately from household waste. Dispose of batteries according to local environmental regulations.

3. Package Contents

Please check the package for the following items:

  • Smart Camera x1
  • User Manual x1
  • USB Cable x1
  • Mounting Bracket x1
  • Screw bag x1

Video 1: Unboxing and initial setup of the MOES Smart PTZ Camera.

4. Product Specifications

AttributeSpecification
Product NameSmart Camera
ModelWCM-P52/WCM-P52P
Light Sensitivity0.1 lux
Video ModeH.265 & H.264
Power Supply5V 1A
Working Temperature-10°C ~ 45°C
Shell MaterialPVC
Network ProtocolSupport TCP/IP, IPv4, DHCP, RTSP, P2P
Network Transmission (WCM-P52)Support 2.4GHz wireless network; support WPA and WPA2 encryption
Network Transmission (WCM-P52P)Support 2.4GHz/5GHz wireless network; support WIFI6 encryption
Maximum Radio Transmit Power<+17dBm
Frequency Band (WCM-P52)2.4GHz
Frequency Band (WCM-P52P)2.4GHz/5GHz
FeatureIntercom, IP Network, Mobile Phone APP, Baby Cry Alarm, Motion Detection, Remote Control
Display TypeCOLOR
InfraredYes
Smart Home PlatformAlexa, Tuya, Google Assistant
Additional FeaturesNight vision effect, alarm detection, alarm notification
Scope of ApplicationSmart home
Sensitivity0.1LUX
Dimensions of the MOES Smart PTZ Camera: 115mm height, 95mm width, 70mm depth.

Figure 2: Product dimensions.

5. Setup Guide

5.1. Powering On

Connect the provided USB cable to the camera and a 5V 1A power adapter (not included) to power on the device. The camera will initiate its startup sequence.

5.2. App Download and Installation

The MOES Smart Camera operates with the MOES App. You can download the app from your device's App Store (iOS) or Google Play Store (Android), or by scanning the QR code below:

QR code for MOES App download, with Google Play and App Store logos.

Figure 3: Scan to download the MOES App.

Note: The MOES application is recommended for better compatibility and customized services, though Tuya Smart / Smart Life app also works.

5.3. Registration or Login

  1. Download and open the "MOES" Application.
  2. If you are a new user, enter the Register/Login interface, tap "Register" to create an account. You will need to enter your phone number to get a verification code and then set your password.
  3. If you already have a MOES account, choose "Log in" and enter your credentials.

5.4. Adding the Device to the App

  1. Open the MOES App and click the "+" icon.
  2. Select "Camera & Lock" and then find "Smart Camera" from the list.
  3. Enter your Wi-Fi network name and password, then click "OK".
  4. Read the instruction about "Scan with the camera" and click "Continue".
  5. Scan the QR Code displayed on your phone screen with the camera. Ensure the camera is 15-20 cm away from the phone screen.
  6. Once you hear a prompt tone from the camera, click "Heard the beep" in the app.
  7. The device indicator light will change from flashing red to steady green, indicating successful network configuration.
  8. Click "Done" to enter the device page and begin using your smart camera.
Screenshot of MOES App showing QR code for scanning and device addition process.

Figure 4: App interface for adding the smart camera.

6. Operating Instructions

6.1. Live View and Pan/Tilt Control

Once the camera is added, you can access the live video feed through the MOES App. Use the directional controls within the app to pan (horizontal movement) and tilt (vertical movement) the camera to adjust its viewing angle.

App screenshot showing live camera feed and pan/tilt controls.

Figure 5: Live view and pan/tilt control in the MOES App.

6.2. Two-Way Audio Communication

The camera supports two-way audio, allowing you to listen and speak through the camera. Tap the microphone icon in the app to speak, and the speaker icon to listen.

MOES Smart PTZ Camera highlighting two-way audio feature.

Figure 6: Two-way audio communication feature.

6.3. IR Night Vision

The camera is equipped with IR night vision for clear monitoring in low-light or complete darkness. You can set the night vision mode to Auto, On, or Off within the app settings.

MOES Smart PTZ Camera highlighting IR Night Vision feature.

Figure 7: IR Night Vision capability.

6.4. Motion Detection and Alerts

Enable motion detection to receive alerts on your smartphone when activity is detected. You can also set up sound alarms and designated monitoring areas.

Alert triggered by motion and sound events, showing a phone notification for human body detection.

Figure 8: Motion and sound event alerts.

Image showing how to set designated monitoring areas within the app.

Figure 9: Setting designated monitoring areas.

6.5. Privacy Mode

Activate Privacy Mode to have the camera rotate downwards, physically blocking the lens to ensure your privacy and security when needed.

Camera in Privacy Mode, rotated to face downwards.

Figure 10: Camera in Privacy Mode.

6.6. WDR for Clearer Imaging

The camera features Wide Dynamic Range (WDR) mode to enhance image clarity, reducing blur caused by overexposure or underexposure due to challenging light conditions.

Comparison of WDR Off vs. WDR On, showing clearer image with WDR enabled.

Figure 11: WDR feature for improved image quality.

6.7. Storage Options (TF Card & Cloud)

The camera supports TF card storage for local recording. Please choose TF cards with capacities of 32GB, 64GB, or 128GB. Additionally, cloud storage is available (a paid service) for viewing video records anytime, anywhere.

Camera showing TF card slot and supported storage capacities.

Figure 12: TF Card Storage options.

App screenshot showing cloud storage feature for video records.

Figure 13: Cloud Storage for remote video access.

6.8. Quick Access to Favorite Spots & Smart Linkage

Save specific camera angle positions as "Favorite Spots" for quick access. You can instantly move the camera to these preset views. Additionally, you can set preset points in smart linkage events within the MOES app. When a linked event is triggered, the camera will automatically turn to the preset point, allowing you to track what's happening at home with ease.

App interface showing how to save and access favorite camera spots.

Figure 14: Quick access to favorite spots.

Image showing smart linkage with a door sensor, triggering the camera to a preset point.

Figure 15: Setting preset points in smart linkage.

6.9. Smart Home Integration

The MOES Smart Camera is compatible with Amazon Alexa and Google Home. For detailed step-by-step guides on linking your smart camera with these voice assistants, please refer to the MOES website: https://www.moestech.com/blogs/news/smart-device-linked-voice-speaker

7. Maintenance

7.1. Cleaning

Use a soft, dry cloth to clean the camera lens and body. Avoid using harsh chemicals or abrasive cleaners that could damage the device.

7.2. Battery Disposal

If the product contains batteries, they must be recycled or disposed of separately from household waste. Please follow local environmental regulations for proper battery disposal.

8. Troubleshooting

8.1. Device Cannot Connect to Network

If your device cannot be connected to the network with the App, ensure the following:

  • Make sure the device is in configuration status (indicator light is flashing quickly).
  • Ensure your Wi-Fi network is available and the camera is not too far from the router.
  • Verify that the Wi-Fi password you entered is correct.

8.2. Device Shows Offline in App

If your device shows offline in the App:

  • Make sure the device is powered on.
  • Ensure the network is stable and that the Wi-Fi name and password have not been modified. If they have, you may need to re-add the device.
  • If the network is normal but the device is still offline, check if there are too many Wi-Fi connections on your network. You can try restarting your router to check the status of the device.

8.3. How to Reset/Re-pair the Camera

To reset or re-pair the camera, press and hold the device reset button for five seconds. Release the button when the camera starts to beep.

9. User Tips

  • For optimal performance, place the camera in a central location within your Wi-Fi coverage area.
  • Regularly check for app updates to ensure you have the latest features and security enhancements.
  • Utilize the "Privacy Mode" when you are home and do not require active monitoring to conserve energy and ensure personal privacy.
  • Consider using a high-speed TF card (Class 10 or higher) for reliable local video recording.

10. Declaration of Conformity

Hereby, WENZHOU NOVA NEW ENERGY CO., LTD declares that the radio equipment type WCM-P52/WCM-P52P is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU. The full text of the EU declaration of conformity is available at the following internet addresses:

11. Warranty and Support

11.1. Warranty Information

Products are covered by a 24-month warranty, effective from the date of purchase of the covered product by a retail customer.

The warranty does not cover:

  • Mechanical damage caused by the user's fault and product defects resulting from such damage.
  • Damage caused by improper use of the product.
  • Defects arising from natural wear and tear during use.
  • Removal of the warranty seal or serial number from the product.
  • Actions taken to eliminate physical defects outside of authorized service.
  • Use of non-original parts and consumables.

For warranty claims, please contact the place or store where you purchased the product.

11.2. Contact Information

Manufacturer: WENZHOU NOVA NEW ENERGY CO.,LTD

Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China

Manufacturer Tel: +86-577-57186815

After Service Email: service@moeshouse.com

UK Representative (EVATOST CONSULTING LTD):

  • Address: Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
  • Tel: +44-292-1680945
  • Email: contact@evatost.com

EC Representative (AMZLAB GmbH):

Made In: China

For more information and updates, follow MOES on social media:

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.