1. Product Overview
These reflective stickers are designed to increase the visibility of your vehicle's wheels during nighttime or low-light conditions. Made from durable, waterproof PET material, they provide a strong reflective warning effect for cars, bicycles, and motorcycles, enhancing safety on the road.
2. Specifications
| Feature | Detail |
|---|---|
| Category | Wheel reflective stickers |
| Material Type | PET film |
| Item Type | Reflective strips |
| Origin | Mainland China |
| Single Strip Dimensions | Length: 9 cm, Width: 0.7 cm |
| Package Dimensions (approx.) | 16 cm (L) x 13 cm (W) x 1 cm (H) |
| Package Weight (approx.) | 0.012 kg |
| Available Colors | Red, White, Blue, Green, Yellow, Silver, Army Green, Dark Grey, Lavender |
| Pack Quantities | 10 pcs, 20 pcs, 40 pcs |
3. Setup and Installation
Follow these steps for optimal adhesion and performance:
- Clean the Surface: Thoroughly clean the wheel surface where the stickers will be applied. Use a degreaser or rubbing alcohol to remove any dirt, grease, or wax. Ensure the surface is completely dry before proceeding.
- Prepare the Sticker: Gently peel off the backing paper from the reflective strip, being careful not to touch the adhesive side.
- Apply the Sticker: Carefully position the sticker on the desired area of the wheel. Press down firmly from one end to the other, smoothing out any air bubbles.
- Ensure Firm Adhesion: Apply consistent pressure across the entire sticker for several seconds to ensure it adheres properly to the surface.
4. Operating Principle
These stickers operate on the principle of retroreflection. They contain microscopic glass beads or prismatic elements that reflect light directly back to its source, making them highly visible to drivers and pedestrians in the dark when illuminated by headlights or other light sources. They do not emit light themselves but enhance existing light for safety.
5. Maintenance
To ensure the longevity and effectiveness of your reflective stickers:
- Cleaning: Clean the stickers regularly with mild soap and water. Avoid harsh chemicals or abrasive cleaners that could damage the reflective surface or adhesive.
- Inspection: Periodically inspect the stickers for any signs of peeling, damage, or loss of reflectivity. Replace any damaged stickers promptly to maintain optimal safety.
- Waterproof Feature: The stickers are designed with a waterproof function, made from PET material, ensuring durability against water splashes and rain.
6. Troubleshooting
Stickers are peeling off or not adhering properly:
- Surface Preparation: Ensure the application surface was thoroughly cleaned and dried before installation. Any residue (dirt, oil, wax) can prevent proper adhesion.
- Application Pressure: Verify that sufficient and even pressure was applied during installation to activate the adhesive.
- Temperature: Extreme temperatures during application (too cold or too hot) can affect adhesive performance. Apply in moderate temperatures.
- Adhesive Quality: If issues persist despite proper application, the adhesive on the specific batch of stickers might be compromised. Contact the seller for assistance.
7. User Tips
- For optimal adhesion, always ensure the wheel surface is completely clean and dry before applying the stickers. Use a degreaser for best results.
- Apply firm, even pressure across the entire sticker during installation to prevent premature peeling.
- Consider applying stickers in a garage or shaded area to avoid direct sunlight or extreme temperatures during installation.
8. Warranty and Support
For specific warranty information, return policies, or further support regarding your reflective stickers, please refer to the seller's terms and conditions or contact the seller directly. A general user manual in PDF format may be available for additional guidance.
Note: The provided PDF document for 'Item guides & documents' is a generic user manual. For product-specific details, please refer to the information provided in this manual and contact the seller if needed.