Introduction
Thank you for purchasing the Shunmaii M1 White Noise Machine with Night Light. This device is designed to help create a peaceful environment for sleep and relaxation for both babies and adults. It features a variety of soothing sounds, adjustable night light colors, and a convenient timer function. Please read this manual carefully before using the product to ensure proper operation and to maximize its lifespan.
Package Contents
- 1 x White Noise Sound Machine (Model M1)
- 1 x USB Data Cable
- 1 x User Instructions (this manual)
Product Overview
The Shunmaii M1 combines a sound machine with a multi-color night light in a compact, portable design. It is equipped with touch controls for easy operation.

Figure 1: Top view of the device with control buttons.

Figure 2: Side view showing the USB-C charging port and 3.5mm headphone jack.
Setup
Charging the Device
- Locate the USB-C charging port on the side of the device (refer to Figure 2).
- Connect the provided USB data cable to the device and plug the other end into a compatible USB power source (e.g., laptop, power bank, or a standard USB wall adapter).
- The device has a built-in 2000mAh Li-ion 18650 battery. A full charge takes approximately 3 hours.
- When fully charged, the device can operate for 5-10 hours, depending on usage (sound and light intensity).
Note: It is recommended to fully charge the device before first use.
Operating Instructions
Control Panel Overview

Figure 3: Detailed control panel and port functions.
Button Functions:
- Power / Play / Pause (O/I): Press to turn on/off the device. Press again to play or pause the current sound.
- Mode (MODE): Press to cycle through the 12 available white noise and nature sounds.
- Volume Up / Next Song (+/|>>): Press to increase volume. Long press to skip to the next sound.
- Volume Down / Previous Song (-/|<<): Press to decrease volume. Long press to go to the previous sound.
- Timer (TIMER): Press to set a sleep timer. Each press cycles through 15 minutes (Red light), 30 minutes (Green light), and 60 minutes (Blue light).
- Light Mode (Light Mode icon): Press to cycle through the various light modes and colors.
Sound Selection
The device offers 12 soothing sounds to aid sleep and relaxation:
- White Noise (3 variations)
- Fan
- Waves
- Clock
- Cricket
- Lullaby
- Rain
- Train
- Running Water
- Heartbeat
Use the Mode button to switch between these sounds.
Night Light Operation
The integrated night light offers a range of colors and modes:
- Bright White Light
- Warm Light
- Red
- Green
- Blue
- Pink
- Yellow
- Cyan
- Colorful Change (gradient mode)
- Turn off lights
Press the Light Mode button to cycle through these options.

Figure 4: Device operating with music and light.
Timer Function
The device features a smart timing function to automatically turn off after a set period:

Figure 5: Timer settings indicated by LED color.
- Press the Timer button once for 15 minutes (Red LED indicator).
- Press the Timer button twice for 30 minutes (Green LED indicator).
- Press the Timer button three times for 60 minutes (Blue LED indicator).
- Press the Timer button a fourth time to deactivate the timer.
Maintenance
Cleaning
- Ensure the device is turned off and unplugged before cleaning.
- Wipe the exterior with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface.
- Avoid getting moisture into any openings.
Storage
- Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- If storing for an extended period, ensure the battery is partially charged (around 50%) to maintain battery health.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Battery is depleted. | Connect the device to a power source using the USB cable and allow it to charge for at least 30 minutes before attempting to turn it on. |
| No sound or light. | Device is off or paused; volume is too low; light is off. | Ensure the device is powered on. Press the Play/Pause button. Increase the volume. Press the Light Mode button to activate lights. |
| Sound quality is poor. | Device is too close to interference; low battery. | Move the device away from other electronic devices. Charge the device fully. |
If you encounter issues not listed here, please refer to the Warranty and Support section.
Specifications
| Product Name | Colorful Lamp White Noise Machine |
| Model | M1 |
| Color | White |
| Material | ABS/PP/Electronic Components |
| Input Voltage | DC 5V |
| Power | 1.8W |
| Input Current | 0.5-1.0A |
| Battery | Li-ion 18650-2000mAh |
| Service Time | 5-10 hours |
| Charging Time | 3 hours |
| Sound Tracks | 12 (White Noise x3, Fan, Waves, Clock, Cricket, Lullaby, Rain, Train, Running Water, Heartbeat) |
| Light Colors | Bright White, Warm, Red, Green, Blue, Pink, Yellow, Cyan, Colorful Change |
| White Lamp Bead Color Temp. | 2835 Normal White 6000-6500K |
| Warm Lamp Bead Color Temp. | 2835 Warm White 3000-3200K |
| RGB Band (Red) | 620-625nm |
| RGB Band (Green) | 520-525nm |
| RGB Band (Blue) | 467-470nm |
| Product Weight | 165g |
| Product Dimensions | 63mm (Height) x 90mm (Diameter) / 2.48in x 3.54in |

Figure 6: Product dimensions.

Figure 7: The device is small and portable, weighing only 165g.
User Tips
- Optimal Placement: For best sound distribution, place the device on a flat, stable surface in the center of the room or near the sleeping area.
- Portability: Due to its compact size and light weight (165g), this white noise machine is ideal for travel. Remember to fully charge it before your trip.
- Headphone Use: For personal listening without disturbing others, connect standard 3.5mm headphones to the headphone jack on the side of the device.
- Battery Life: To extend battery life, consider using the timer function, especially overnight.
Warranty and Support
This product is designed for reliability and performance. For any issues, inquiries, or assistance, please contact the seller directly. We are committed to providing the highest standard of customer service to ensure a pleasant experience.
A PDF version of this user manual may also be available for download from the product page or by contacting customer support. (Reference: User Manual PDF)