Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Cugo 8MP WiFi IP Camera. Please read this manual thoroughly before use and retain it for future reference. This camera features dual lenses, 8MP Ultra HD resolution, AI detection, 2.4G WiFi connectivity, two-way audio, infrared and full-color night vision, and is waterproof.

Figure 1: Product Overview and Key Features
Safety Disclaimer
⚠️️Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.
Setup Guide
1. Choose the Correct Power Plug
Ensure you select the appropriate power plug type (EU, US, UK, AU) for your region when setting up the camera.

Figure 2: Available Plug Options
2. Downloading the YOOSEE App
The camera operates with the YOOSEE mobile application. You can download it using one of the following methods:
- Option 1: Search for "YOOSEE" in your mobile device's App Store (iOS) or Google Play Store (Android).
- Option 2: Scan the QR code provided in the original user manual (PDF) or on the product packaging to directly download the "YOOSEE" mobile APP.

Figure 3: YOOSEE App Download QR Codes
3. Account Registration
New users must register an account to use the YOOSEE app. You can register using your mobile phone number or email address.
- Click "Register" within the app.
- Select your "Registration Location".
- Enter your "Mobile Number/Email".
- Click "Next" and follow the in-app prompts to complete registration and log in.
Note: In some countries/regions, mobile phone number registration may not be supported. In such cases, please register using your email address. Data services are not compatible across different registered countries and regions; ensure you select the correct region during registration.
4. Switching on Device
Before connecting the camera to the app, power it on. Wait approximately 30 seconds until the camera emits the voice prompt "Please scan the QR code to add the device" and a continuous "du du" sound. If you do not hear these prompts, press and hold the RESET button until the camera beeps "di" and reboots.

Figure 4: Camera Reset Button Location
5. Add Camera to App
To add your camera to the YOOSEE app:
- In the YOOSEE app, click the "+" icon in the upper right corner.
- Select "Prepare Camera".
- Scan the QR code located on the camera itself.
- Follow the in-app prompts to complete the camera addition process.
Important: When adding a camera, ensure that location permissions and Bluetooth permissions are enabled for the YOOSEE app on your mobile phone. Verify that your mobile phone is connected to a 2.4GHz Wi-Fi network, as some cameras do not support 5G Wi-Fi. Keep the camera within 10 meters of the router. Ensure the Wi-Fi password is entered correctly and is case-sensitive.
Operating Instructions
1. Dual-Lens Viewing
This camera features a dual-lens design, allowing you to monitor different areas simultaneously. The app interface displays views from both lenses, providing comprehensive coverage.

Figure 5: Dual-Lens Different Views
2. Pan/Tilt Control and Quick-Access Sites
The camera offers a wide range of motion with Pan 300° and Tilt 60° capabilities, allowing you to adjust the viewing angle remotely via the YOOSEE app. You can also set quick-access collected sites for rapid navigation to frequently monitored areas.

Figure 6: Pan 300° / Tilt 60° Movement

Figure 7: Quick-access Collected Sites
3. Motion Detection and AI Functions
The camera is equipped with AI functions including motion detection and automatic human tracking. When motion is detected in the surveillance area, the camera will automatically track the subject and send a push notification to your mobile phone. The camera can also function as a lighting device with its 6 bright LED lamp beads.

Figure 8: Motion Detection in Action
4. Two-Way Voice Intercom
The camera includes a built-in microphone and speaker, enabling two-way voice communication. This feature allows you to interact with individuals near the camera. Note that voice intercom can only be initiated via the YOOSEE App.

Figure 9: Two-Way Voice Intercom
5. HD Night Vision
The camera provides clear surveillance even in low-light conditions with its HD Night Vision capabilities. It supports both Full-Color Night Vision Mode and Infrared Night Vision Mode, which can be toggled as needed.

Figure 10: HD Night Vision Modes
6. Resolution Switching (HD/SD)
You can freely switch between High Definition (HD) and Standard Definition (SD) resolutions within the app, depending on your viewing preference or network conditions.

Figure 11: Resolution Comparison (SD vs. HD)
7. Video Recording and Storage
The camera supports continuous video recording and event-triggered recording. Recordings can be stored locally on a TF (MicroSD) card or uploaded to cloud storage, allowing you to view them anywhere via the YOOSEE app.

Figure 12: Remote Video Viewing and Cloud Storage

Figure 13: TF Card Storage Options
The camera uses loop recording technology, automatically overwriting the earliest video when the SD card is full. Supported TF card capacities include 32GB, 64GB, and 128GB. The camera supports up to 256GB SD cards with FAT32/exFAT format.
8. ONVIF Standard Compliance
The camera conforms to the ONVIF standard, allowing for integration with compatible network video recorders (NVRs) and other surveillance systems.

Figure 14: ONVIF Standard Compliance
Maintenance
1. SD Card Handling
Always disconnect the power supply before inserting or removing the SD card to prevent damage to the card or camera. If you experience issues with video playback from the SD card, try formatting the card through the app's settings ([Settings] -> [Video Settings] -> [Format SD card]). If problems persist, consider replacing the SD card with a new one.
2. Software and Firmware Updates
The YOOSEE App and camera firmware will be updated periodically. It is recommended to upgrade online when prompted to ensure optimal performance and access to the latest features.
3. Environmental Conditions
Avoid installing the product in environments with high temperatures, high humidity, excessive dust, or smoke, as these harsh conditions may cause equipment damage. The camera has an IP67 rating, indicating it is protected against dust and temporary immersion in water, making it suitable for both indoor and outdoor use, provided it is sheltered from driving rain if installed externally.
Troubleshooting (FAQs)
Q: The camera can't connect to Wi-Fi?
- A: Ensure the Wi-Fi password entered is correct (it is case-sensitive).
- A: Reboot your router and attempt to add the camera again.
- A: Confirm that the camera supports 5G band Wi-Fi if you are using a 5G network; otherwise, ensure your mobile phone is connected to a 2.4GHz Wi-Fi network.
- A: Check your Wi-Fi router settings to ensure options like AP isolation or anti-dawdling are not enabled, as these can restrict Wi-Fi access.
- A: Some mobile phones require location permissions to be enabled for the YOOSEE app and for positioning services to be active to detect Wi-Fi networks.
Q: What should I do if the camera is offline in the camera list?
- A: Verify that the network connected to the camera is functioning normally.
- A: If an SD card is installed, remove it, then reboot the camera and router to see if the camera comes online.
- A: If the issue persists, reset the camera by long-pressing the "RESET" button until it beeps, then re-add it to the app. Check for any available software updates for both the app and camera firmware.
Q: What if the camera is offline after I change the router or change the Wi-Fi password?
- A: The camera retains the old Wi-Fi password, causing a mismatch. You must reset the camera (long-press the "RESET" button until it beeps) and then re-add it to the app following the setup prompts.
Q: What should I do if I can't watch the video on the card playback?
- A: Ensure the video recording switch is enabled in the app.
- A: If recording is enabled but no video is present, go to [Settings] -> [Video Settings] and format the SD card.
- A: If you still cannot watch videos after formatting, it is recommended to replace the SD card.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Cugo |
| Model | 8MP WiFi IP Camera |
| Megapixels | 8MP (Each lens 4MP, total 8MP) |
| Lens Quantity | Dual Lens |
| Lens (mm) | 3.6mm |
| Zoom | 10X Digital zoom |
| Viewing Angle | 180° |
| Movement Range (Pan) | 0°-360° (300° controllable) |
| Movement Range (Tilt) | -10°-180° (60° controllable) |
| Connectivity | WIFI (2.4GHz) |
| APP | YOOSEE |
| AI Functions | Motion Detection, AI Automatic tracking |
| Audio Output | Two Way Audio |
| Night Mode | Infrared Night Vision, Color Night Vision |
| IR Distance (m) | 15M |
| Video Compression Format | H.264 |
| Storage Method | TF Card (32G, 64G, 128G supported up to 256G), Cloud Storage |
| Power Supply | Normal, Mains Electricity (110-220V) |
| Operating Temperature | -10°C to 60°C |
| IP Rating | IP67 |
| Installation | Ceiling, Embedded, Side, Wall Mounted, Magnetic, Stick, Pendant Mount, Vertical Pole Mount |
| Supported Mobile Systems | Symbian, Windows Mobile, Android, iOS |
| Supported Operating Systems | Windows 98, XP, Vista, 7, 8, 10, 2000, 2003, 2008, macOS |
| Certification | CE |
| ONVIF Support | Yes |
User Tips
- The camera offers smooth PTZ (Pan/Tilt/Zoom) motion and very clear images, making it effective for surveillance.
- Installation is generally easy, and the app is user-friendly for both live viewing and recorded playback.
- The dual-lens feature is highly convenient for monitoring multiple areas simultaneously, such as a front door and driveway.
- For external installations, consider placing the camera under a canopy or sheltered area to protect it from driving rain, despite its IP67 rating.
- If you intend to use local storage, it is recommended to purchase the camera option that includes a memory card, as third-party memory card compatibility or slot location might be unclear.
- Be aware that account creation is required for the YOOSEE app and PC application.
Warranty and Support
For further assistance or technical support, please contact support@gwall.cc. You can also find more tutorials and help within the "Help and Feedback" section of the YOOSEE app.
A detailed user manual in PDF format is available for download. This document contains additional guides and information regarding the camera's features and operation.