1. Product Overview
These CNC Wide Fat Footpegs are designed to provide enhanced grip and control for motorcycle riders. They feature a 360-degree rotation capability and pitch adjustment hardware for customizable riding positions.
Key Features:
- Ultimate grip and anti-slip control in various riding conditions.
- 360-degree rotation for adjustable angle and secure locking.
- Exclusive pitch adjustment hardware to customize footpeg angle to rider preference.
Compatible Models:
- Harley Sportster XL883L and XL1200C (2011-later)
- XL1200CX (2016-later)
- XL1200V (2012-2016)
- XL1200X (2010-later)
- XL1200XS (2018-later)
- XL models equipped with Extended Reach Forward Control Conversion Kit P/N 50700030 (2014-later)
- FXCW and FXCWC (2008-2011)
- Softail FXS and FXSB (2011-2017)
- FXSE (2016-2017)
- Note: Does not fit 2015-later XG models.
2. Safety & Warnings
Please read all safety information before installation and use.
- This product is suitable only for designated vehicle models. Installing it on incompatible vehicles may cause riding accidents.
- During installation, correctly distinguish between the left and right pedals. Incorrect installation can affect operation and create hazards.
- Before each ride, ensure the footpegs are firmly attached. Riding with loose footpegs is strictly prohibited.
- This product is a modified accessory. After installation, perform a test ride in a safe area to confirm correct function before driving on public roads.
- Keep out of reach of children under 36 months to prevent injury or ingestion of small parts. Children should use under adult supervision.
3. Installation Instructions
Tools required: Wrench (not included).
- Using a wrench, unscrew the original foot pedal screws from your vehicle.
- Remove the old foot pedal.
- Align the new footpeg with the vehicle's mounting hole.
- Insert the included screw through the footpeg and into the mounting hole.
- Tighten the screws with a wrench to ensure the footpeg is stable and not loose.
- Repeat steps 1-5 for the other side.
- After installation, gently shake both footpegs to confirm they are securely fastened.
4. Maintenance & Storage
Cleaning:
- Clean the footpegs with a soft, lint-free cloth.
- Avoid abrasive cleaners or solvents that may damage the finish.
Storage:
- Store the footpegs in a dry place at room temperature (15°C - 35°C) to prevent corrosion or material degradation.
5. Specifications
| Attribute | Value |
|---|---|
| Item Type | Foot Rests |
| Material | CNC Billet Aluminum + Stainless Steel Spikes |
| Item Weight | 0.35 kg |
| Item Length | 20 cm |
| Item Width | 20 cm |
| Item Height | 5 cm |
| Available Colors | Black, Silver, Blue, Red, Gold |
| Origin | Mainland China |
6. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for motorcycle footpegs include:
- Regularly check the tightness of the mounting screws, especially after the first few rides.
- Clean the footpegs periodically to maintain grip and appearance.
- Ensure proper foot placement on the pegs for optimal control and comfort during rides.
7. Warranty & Support
For any questions, concerns, or support regarding your QIDEWIN Motorcycle CNC Wide Fat Footpegs, please contact the manufacturer:
Guangzhou QIDEWIN Electronic Technology Co., LtdProvince Guangzhou Baiyun District Yongping Subdistrict, Guantingxijie NO:32 202
EU Authorized Representative: SUCCESS COURIER SL, CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
Please retain your proof of purchase for warranty claims.