1. Introduction
Thank you for choosing the ipega PG-SW001 Wireless Game Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller for an optimal gaming experience across Nintendo Switch, Android devices, and PC.

Figure 1: ipega PG-SW001 Wireless Game Controller
Video 1: ipega PG-SW001 Product Overview
2. Setup
2.1 Package Contents
- 1 × PG-SW001 Wireless Game Controller
- 1 × Type-C Charging Cable
- 1 × D-pad (Cross Key)
- 1 × User Manual
2.2 Controller Layout
The controller features a standard layout with additional programmable buttons and interchangeable components:
- Left Side: L1/L2 buttons, SELECT button, Left 3D Joystick (L3 press), Turbo button, D-pad (Cross Directional Keys).
- Right Side: R1/R2 buttons, START button, A/B/X/Y Function Buttons, Screenshot button, Right 3D Joystick (R3 press).
- Top/Front: Type-C interface, Mode Indicator Lights, HOME/Power On/Off button, Programming Switch.
- Rear: L2/R2 Travel Switches, M1/M2/N1/N2 Programmable Back Buttons.
2.3 3D Joystick and D-Pad Interchange
The left 3D joystick and D-pad can be swapped to suit your preference:
- Carefully open the left side cover of the controller as indicated by the arrow. Remove the rotation key from its slot.
- Use the rotation key to turn the switch to the triangle indicator. This will allow you to lift out the 3D joystick and D-pad. You can then swap their positions.
- After swapping, use the rotation key to turn the switch back to align with the notch indicator. Close the side cover securely.

Figure 2: Opening the Controller Cover

Figure 3: Swapping Joystick and D-Pad
3. Operating Instructions
3.1 Wireless Connection Mode

Figure 4: Multi-Platform Compatibility
3.1.1 Nintendo Switch Connection
- Turn on your Nintendo Switch console. Navigate to the Controllers menu and select