LINCUKOO D04

Contents

LINCUKOO Tuya Zigbee3.0 Smart Wireless Door Windows Sensor

Model: D04 | Brand: LINCUKOO

1. Introduction

The LINCUKOO D04 Smart Wireless Door Windows Sensor is a crucial component for enhancing your home security and automation. This sensor detects the open/closed status of doors, windows, drawers, or any other object that can be opened and closed. It integrates seamlessly with Tuya, Zigbee3.0, and Bluetooth platforms, providing real-time notifications and enabling intelligent linkages with other smart devices.

LINCUKOO D04 Smart Wireless Door Windows Sensor, powered by Tuya, with icons for Smart Life, iOS, Android, Scenes, WiFi, Zigbee, and Bluetooth.

Figure 1: LINCUKOO D04 Smart Wireless Door Windows Sensor overview.

2. Safety Information

Please read and follow these safety guidelines to ensure proper operation and prevent damage:

  • Keep the device away from water and high humidity environments.
  • Do not attempt to disassemble or repair the device yourself. Refer to qualified personnel for service.
  • Use only specified battery types (2*AAA) and ensure correct polarity during installation.
  • Keep batteries out of reach of children.
  • Dispose of used batteries according to local regulations.

3. Package Contents

  • Smart Door Window Sensor (Main Unit and Magnet) x 1
  • AAA Batteries x 2 (pre-installed or included)
  • User Manual (PDF available online: View PDF)

4. Specifications

Product Parameters
Parameter Value
Model Number D04
Product Name Door Sensor
Use Platform Tuya
Agreement Zigbee/WiFi/Bluetooth
Distance Used (m) ≥50
Power Supply 2*AAA
Dimensions (mm) 70×24×19 (main) / 32×8×19 (magnet)
Detection Range ≤15mm
Authentication CE, RoHS, FCC
Environment Operating Temperature: -10°C ~ +50°C
Operating Humidity: Maximum 95%RH
Diagram showing the dimensions and product parameters table for the LINCUKOO D04 sensor.

Figure 2: Product dimensions and specifications.

5. Setup Guide

Follow these steps to set up your LINCUKOO D04 sensor:

5.1. App Installation

This product supports Tuya platform (Smart Life App) or eWeLink platform. Download the appropriate app from your device's app store (App Store for iOS, Google Play for Android) or scan the QR code provided in the original manual.

Diagram showing the sensor components (LED, Button, Battery compartment) and QR codes for Smart Life and eWeLink apps.

Figure 3: Sensor components and app QR codes.

5.2. Power On the Sensor

  1. Open the back cover of the main sensor unit.
  2. Remove the insulation sheet from the batteries (if present).
  3. Ensure the 2*AAA batteries are correctly inserted with the positive and negative terminals aligned.
Image showing the sensor with its back cover open, revealing two AAA batteries.

Figure 4: Battery compartment with AAA batteries.

5.3. Device Pairing

a) For Wi-Fi Version:

  • Enter the Smart Life (Tuya) App.
  • Click "Add Device".
  • Follow the in-app instructions to connect the device to your Wi-Fi network.

b) For Zigbee/Bluetooth Version:

  • Ensure your Zigbee/Bluetooth gateway has been added to the app first.
  • Press the button on the sensor for 5 seconds until the LED blinks.
  • In the app, go to the gateway's homepage and click "Search new device" or "Add Devices".
  • Follow the in-app instructions to connect the device to your gateway.

5.4. Device Installation

The sensor supports two installation methods: adhesive tape or screws (nails).

Diagram illustrating two installation methods (nails and double-sided tape) and the required alignment and gap for the sensor components.

Figure 5: Installation methods and alignment.

  • Method 1: Fix with nails (screws) - Use the provided screws to mount the main unit and magnet securely.
  • Method 2: Fix with double-sided tape - Peel off the protective film from the adhesive tape on the back of both sensor parts and firmly press them onto the desired surface.

Important Installation Tips:

  • The alignment marks on the main unit and the magnet must be close together.
  • The gap between the main unit and the magnet must be less than 15mm when the door/window is closed.
  • Recommended installation height is 1.8 to 2.1 meters from the floor.

6. Operation

6.1. Real-time Monitoring and Notifications

Once installed and paired, the sensor will detect the open/closed status of your door or window. Through the Tuya App (or eWeLink/Home Assistant), you can see the status of the door/window at any moment. When the door/window is opened or closed, you will receive an instant notification message on your phone, keeping you informed at all times.

Screenshot of a phone showing a 'Door Sensor is opened' notification, with the physical sensor installed on a window.

Figure 6: Intelligent security linkage with app notification.

6.2. Alarm Alert and Recording

Whenever the sensor is triggered (opened/closed), it will send an alarm to alert you. The app also supports checking open/close records, allowing you to review the history of sensor activity.

Image depicting a person attempting to open a door, with a sensor installed, and a phone displaying a notification about the door status.

Figure 7: Real-time perception of door and window protection.

6.3. Smart Home Integration and Linkage

The LINCUKOO D04 sensor can be integrated with various smart home platforms and devices:

  • Tuya Smart Life App: Full control and monitoring.
  • eWeLink Platform: For ZW-ZB version, requires an eWeLink gateway.
  • Home Assistant Platform: For HA-ZB version, requires a Home Assistant gateway.
  • Voice Assistants: Works with Amazon Alexa and Google Assistant. You can ask for the status of your doors/windows.
A person interacting with Amazon Alexa devices, asking 'Alexa, Is the door closed?' and receiving the response 'The door is opened.'

Figure 8: Integration with Amazon Alexa.

Intelligent Lighting Linkage:

You can set up automation rules within the app (e.g., Smart Life) to link the sensor with other smart devices. For example, configure a smart light to turn on automatically when the door is opened.

Diagram showing a gateway, sensor, and LED light, illustrating how a light can turn on when a door is opened.

Figure 9: Intelligent lighting linkage setup.

Diagram showing a gateway, sensor, smart switch, smart light, and smart socket, demonstrating linkage with other Tuya devices.

Figure 10: Linkage with other Tuya devices.

6.4. Device Sharing

To allow family members to monitor the status of doors/windows, you can share your added sensors. Navigate to "Home Management" in the "Me" page of the app and follow the instructions to share access.

7. Maintenance

7.1. Battery Change

The sensor uses 2*AAA batteries. When the battery level is low, the app will automatically send a low battery alarm notification. To change the batteries:

  1. Open the back cover of the main sensor unit.
  2. Remove the old AAA batteries.
  3. Insert new 2*AAA batteries, ensuring correct positive (+) and negative (-) polarity.
  4. Close the back cover securely.

Never worry about running out of battery with timely reminders.

8. Troubleshooting

  • Sensor not connecting to app: Ensure the gateway (for Zigbee/Bluetooth versions) is properly set up and connected to the internet. Check Wi-Fi credentials for Wi-Fi versions. Make sure the sensor is in pairing mode (LED blinking).
  • No notifications: Verify app notification settings on your phone and within the smart home app. Ensure the sensor is online and has sufficient battery.
  • Sensor not detecting open/close: Check the gap between the main unit and the magnet. It must be less than 15mm when closed. Ensure the alignment marks are facing each other.
  • Low battery warning: Replace the 2*AAA batteries as soon as possible to maintain continuous operation.

9. User Tips

  • For optimal performance, install sensors on frequently used entry points like main doors and ground-floor windows.
  • Regularly check the battery status in the app to avoid unexpected disconnections.
  • Experiment with different automation scenarios (e.g., turning on lights, triggering alarms) to maximize the utility of your smart sensor.
  • Consider placing sensors on cabinets or drawers containing valuables for added security.

10. Certifications

This product is certified with:

  • CE
  • FCC
  • RoHS

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.